[linux-dvb] DiBcom MOD3000 driver gone?

[Gabriele Turchi]

Hi Patrick.

I've done a new test with Fedora 5 x86_64 kernel 2.6.16-1.2080_FC5.

I've replaced the 5'th entry in drivers/media/dvb/dvb-usb/dibusb-mb.c
(line 106) with my own ids (USB_VID_ANCHOR,
USB_PID_DIBCOM_ANCHOR_2135_COLD) and with so changed dvb-usb modules my
VP7041 runs well.

Could you please add a new entry in the source?

Best regards,
Gabriele

P.S.: I'm sorry, my english is alpha version...

Il giorno sab, 25/02/2006 alle 17.32 +0100, Gabriele Turchi ha scritto:
> Il giorno mar, 21/02/2006 alle 16.28 +0100, Patrick Boettcher ha
> scritto:
> > Hi,
> > 
> > On Sun, 19 Feb 2006, Gabriele Turchi wrote:
> > > I have an old VisionPlus USB 1.1 dvb-t VP-7041E, running flawless on a
> > > fedora 3 with dvb_dibusb driver (well, the signal is very low..). When
> > > connecting the unit, in dmesg I read:
> > >
> > >    drivers/media/dvb/dibusb/dvb-dibusb-core.c: DiBcom USB1.1 DVB-T
> > >      reference design (MOD3000) successfully initialized and connected.
> > >
> > > Today I attached the same unit to a fedora 4 AMD64 (x86_64) equipped PC,
> > > and nothing happened... I don't see anything in dmesg after the
> > >
> > >    usb 2-5: new full speed USB device using ohci_hcd and address 4
> > >
> > > Apparently, searching in 2.6.15 sources, the VID and PID are still in
> > > dvb-usb-ids.h, but only there...
> > 
> > Hmm, what are your USB IDs?
> > 
> 
> Cold:
> 
> VID:	USB_VID_ANCHOR			0x0547
> PID:	USB_PID_DIBCOM_ANCHOR_2135_COLD	0x2131
> 
> 
> Warm (on fedora 3 - 2.6.11-1.27_FC3 - dvb-dibusb-5.0.0.11.fw):
> 
> VID:	USB_VID_DIBCOM			0x10b8 
> PID:	USB_PID_DIBCOM_MOD3000_WARM     0x0bb9
> 
> 
> > best regards,
> > Patrick.
> > 
> 
> Best regards,
> Gabriele
> 
> > --
> >    Mail: patrick.boettcher at desy.de
> >    WWW:  http://www.wi-bw.tfh-wildau.de/~pboettch/
> 
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb