[linux-dvb] Stuck with Kworld DVB-T 220 with saa71

Jyrki Majamaki hausberg at mbnet.fi
Mon Apr 3 20:39:56 CEST 2006


Hi, thx for the reply. Sorry to ask but I am a bit new to this.
I haven't used CVS and I am not sure about git kernel either.

I am not sure I know what to fetch and how to do it?
I see that it says that CVS gets replaced by mercurial
at http://www.linuxtv.org/repo/

Is it ok to follow the example about the mercurial approach?
It seems almost understandable to me - allthough I don't know where
these modules will land but I reckon that does not really matter?



> This card works with the CVS version, the card also works with the latest
> git kernel from
> kernel.org.
>
> The remote as yet doesn't work.
>
>
> Jyrki Majamaki wrote:
>> I have Kworld DVB-T 220 and it is evil. It's aDVB-T card
>> with analogue tuner as well.
>>
>> lspci:
>>
>> 02:09.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135
>> Video
>> Broadcast Decoder (rev d0)
>>
>> Following kernel modules at least sound related:
>> /lib/modules/2.6.15.1/kernel/drivers/media/video/saa7134/saa6752hs.ko
>> /lib/modules/2.6.15.1/kernel/drivers/media/video/saa7134/saa7134-alsa.ko
>> /lib/modules/2.6.15.1/kernel/drivers/media/video/saa7134/saa7134-dvb.ko
>> /lib/modules/2.6.15.1/kernel/drivers/media/video/saa7134/saa7134-empress.ko
>> /lib/modules/2.6.15.1/kernel/drivers/media/video/saa7134/saa7134.ko
>>
>> Ok first modprobe saa7134:
>> i2c-core: driver [ir remote kbd driver] registered
>> saa7130/34: v4l2 driver version 0.2.14 loaded
>> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
>> ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 5 (level, low)
>> ->
>> IRQ 5
>> saa7133[0]: found at 0000:02:09.0, rev: 208, irq: 5, latency: 64, mmio:
>> 0xfeadf800
>> saa7133[0]: subsystem: 17de:7201, board: UNKNOWN/GENERIC
>> [card=0,autodetected]
>> saa7133[0]: board init: gpio is 100
>> i2c_adapter i2c-1: adapter [saa7133[0]] registered
>> i2c_adapter i2c-1: master_xfer[0] R, addr=0x7a, len=0
>> i2c_adapter i2c-1: master_xfer[0] R, addr=0x47, len=0
>> i2c_adapter i2c-1: master_xfer[0] W, addr=0x50, len=1
>> i2c_adapter i2c-1: master_xfer[0] R, addr=0x50, len=128
>> saa7133[0]: i2c eeprom 00: de 17 01 72 ff ff ff ff ff ff ff ff ff ff ff
>> ff
>> saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> ff
>> saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> ff
>> saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> ff
>> saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> ff
>> saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> ff
>> saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> ff
>> saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> ff
>> saa7133[0]: registered device video1 [v4l2]
>> saa7133[0]: registered device vbi1
>>
>> modprobe saa7134-empress:
>> nothing
>>
>> modprobe saa6725hs:
>> i2c-core: driver [i2c saa6752hs MPEG encoder] registered
>> i2c_adapter i2c-1: found normal entry for adapter 1, addr 0x20
>> i2c_adapter i2c-1: master_xfer[0] W, addr=0x20, len=0
>>
>> modprobe saa7134-dvb:
>> nothing (unfortunately I guess)
>>
>> modprobe saa7134-alsa:
>> saa7134 ALSA driver for DMA sound loaded
>> saa7133[0]/alsa: saa7133[0] at 0xfeadf800 irq 5 registered as card -1
>>
>> I don't know what this alsa is looking in that card for...there is also
>> a
>> radio tuner there so maybe
>> something to do with it...
>>
>> lsmod looks like:
>> Module Size Used by
>> saa7134_alsa 10912 0
>> saa7134_dvb 10372 0
>> tda1004x 15172 1 saa7134_dvb
>> saa6752hs 8460 0
>> saa7134_empress 7108 0
>> saa7134 109728 3 saa7134_alsa,saa7134_dvb,saa7134_empress
>> ir_kbd_i2c 6604 1 saa7134
>> snd_pcm_oss 49696 0
>> snd_mixer_oss 17152 1 snd_pcm_oss
>> snd_seq_oss 32320 0
>> snd_seq_midi_event 6080 1 snd_seq_oss
>> snd_seq 50128 4 snd_seq_oss,snd_seq_midi_event
>> snd_seq_device 6860 2 snd_seq_oss,snd_seq
>> snd_intel8x0 29596 0
>> snd_ac97_codec 92384 1 snd_intel8x0
>> snd_ac97_bus 1792 1 snd_ac97_codec
>> snd_pcm 82824 4 saa7134_alsa,snd_pcm_oss,snd_intel8x0,snd_ac97_codec
>> snd_timer 22084 2 snd_seq,snd_pcm
>> snd 47076 10
>>
saa7134_alsa,snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
>> soundcore 7840 1 snd
>> snd_page_alloc 8456 2 snd_intel8x0,snd_pcm
>> cx88_dvb 7684 0
>> mt352 6212 2 saa7134_dvb,cx88_dvb
>> or51132 9284 1 cx88_dvb
>> video_buf_dvb 4548 2 saa7134_dvb,cx88_dvb
>> nxt200x 14724 2 saa7134_dvb,cx88_dvb
>> lgdt330x 7708 1 cx88_dvb
>> cx22702 6020 1 cx88_dvb
>> cx8802 9220 1 cx88_dvb
>> cx8800 28300 0
>> cx88xx 55712 3 cx88_dvb,cx8802,cx8800
>> video_buf 17284 9
>>
saa7134_alsa,saa7134_dvb,saa7134_empress,saa7134,cx88_dvb,video_buf_dvb,cx8802,cx8800,cx88xx
>> ir_common 8132 3 saa7134,ir_kbd_i2c,cx88xx
>> btcx_risc 3976 3 cx8802,cx8800,cx88xx
>> tveeprom 13776 1 cx88xx
>> nvidia 4083664 12
>>
>> I could try modprobe with different card options but I am not sure
>> whether
>> this is going to help other than with analogue tuner.
>>
>> The mentioned cx88 modules come from my second card Hauppage Nova-T
>> (works
>> like a charm)
>>
>>
>> _______________________________________________
>> linux-dvb mailing list
>> linux-dvb at linuxtv.org
>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>>
>>
>>
>
>
>
>





More information about the linux-dvb mailing list