[linux-dvb] Cinergy 1200 DVB-C not working with latest hg

timo timo.helkio at nic.fi
Wed Apr 12 21:30:16 CEST 2006



Hi, my Terratec Cinergy DVB-C has worked with hg drivers until last
weekend, when config-system was changed. I am using Gentoo latest steady
kernel 2.6.15-r1 and dmesg about this card is below. Line about DMA is
not there, when frontend is found. I have Hauppauge Nexus-S too and it
is working.

I can recreate working drivers, if I recompile normal kernel and then
only changed dvb-modules will compile and then do: intall_modules.
        
I have blacklisted stradis in /etc/hotplug/blacklist as recomended in a
earlier message.
        
              Timo


saa7146: register extension 'budget_av'.
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC4] -> GSI 19 (level,
high) -> IRQ 19
saa7146: found saa7146 @ mem fa188000 (revision 1, irq 19)
(0x153b,0x1156).
saa7146 (1): dma buffer size 192512
DVB: registering new adapter (Terratec Cinergy 1200 DVB-C).
adapter failed MAC signature check
encoded MAC from EEPROM was
ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
KNC1-1: MAC addr = 00:0a:ac:01:d3:b8
DVB: TDA10021: tda10021_readreg: readreg error (ret == -121)
budget-av: A frontend driver was not found for device 1131/7146
subsystem 153b/1156
budget-av: ci interface initialised.

        




More information about the linux-dvb mailing list