[linux-dvb] FusionHDTV Dual Digital zl10353 / dee1601 tuning
damiendusha at netspace.net.au
Wed Aug 16 08:42:10 CEST 2006
Hi Brett, Jurgen and others,
After failing to compile Chriss test DVB sources for the DViCO Dual Digital
card for about a week on all sorts of different kernels, the patches have
made their way into the main dvb sources :-) And they work!! Schweet!
With one small hitch I am having problems with tuning SBS. I am using
18.104.22.168 vanilla sources, and the v4l-dvb mercurial sources, about 2 days
after Chriss patches went into the v4l-dvb tree.
I am using the channels.conf file supplied for Brisbane on Chriss website.
In the past, with the 2.6.18-rc3 kernel out of the box allowed me to tune
all channels, albeit Channel 9 and SBS required the +166667Hz offset.
- Channel 9 tunes quite nicely with a +166667Hz offset.
- ABC, Seven and Ten all tune nicely without offsets
- SBS refuses to tune (SNR reported by tzap is roughly 5xxx for
10-20s, followed by a brief lock at approx dxxx for 5seconds , then drops
out to 0000 forever)
- SBS does this for 0 offset, +166667 offset and -166667 offset.
The behaviour is quite repeatable.
And furthermore, on (I think) the USB part, tzap a1 with an offset of
+166667, SBS tunes with an snr of about dddd, and manages to hold it.
Even more confusing, using tzap a0 SBS HD (same +166667 offset
channels.conf file) on the other adaptor results in the behaviour above.
On a1, Channel 9 tunes (with offset) nicely as does the others, without an
Any further ideas? Is there any other information I can provide?
From: linux-dvb-bounces at linuxtv.org [mailto:linux-dvb-bounces at linuxtv.org]
On Behalf Of Jurgen Weber
Sent: Wednesday, 9 August 2006 3:23 PM
To: bcarruthers at iii.net.au; linux-dvb at linuxtv.org
Subject: RE: [linux-dvb] FusionHDTV Dual Digital zl10353 / dee1601 tuning
Yes, Chris e-mailed me himself and said as much but after downloading and
using Im still having no results. I thought maybe at first it could be my
current dodgy Arial setup but I have just come back from my mates place whom
has a digital set top box etc, that works great with no success either. :-(
http://pastebin.ca/123294 shows you the results of my scan, as you can tell
its not very exciting. :-( after completing this I find this
DVB: demodulator offset has changed for frontend "Zarlink ZL10353 DVB-T".
Please report tuning difficulties to linux-dvb at linuxtv.org
DVB: freq: 191625000, div: 1367 -> 1366, offset: 36166667 -> 36166667,
actual: 227665756 -> 227832422
In my dmesg/messages log. Im going to send the info to chris and see if
there is still something wrong or if Im just doing something completely
E-mail: jurgen at bccomputers.com.au
Office PH: (02) 9699 2852
From: Brett Carruthers [mailto:bcarruthers at iii.net.au]
Sent: Wednesday, 9 August 2006 11:30 AM
To: Jurgen Weber; linux-dvb at linuxtv.org
Subject: Re: [linux-dvb] FusionHDTV Dual Digital zl10353 / dee1601 tuning
Chris has only just made some modifications to the driver for this card due
to its new chipset.
Try a build from Chris's lastest hg tree;
hg clone http://linuxtv.org/hg/~pascoe/v4l-dvb-test/
following the "how to build from hg" instructions.
This driver fixed my DVB-T plus tuning problems and I can tune all my
channels down here in Wollongong.
Hopefully Chris doesn't mind me passing this info on, once again thanks to
Chris for the great work!
Jurgen Weber wrote:
I am using Debian Etch, 22.214.171.124 kernel on an Intel 3ghz, SB86i Shuttle.
Dvico Fusion HDTV DVB-T Dual Digital Rev. 1.4
I have not gotten this board to work yet, I only got it recently and this is
my first setup/install. :\
I am use the following to scan
1. # Australia / Sydney / Kings Cross and North Head
3. # T freq bw fec_hi fec_lo mod transmission-mode guard-interval
5. # ABC UHF30
6. T 543500000 7MHz 3/4 NONE QAM64 8k 1/16 NONE
7. # Seven UHF48
8. T 669500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
9. # Nine UHF33
10. T 564500000 7MHz 3/4 NONE QAM64 8k 1/16 NONE
11. # Ten UHF45
12. T 648500000 7MHz 3/4 NONE QAM64 8k 1/16 NONE
13. # SBS UHF34
14. T 571500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
17. # Australia / Sydney / North Shore (aka Artarmon/Gore Hill)
19. # T freq bw fec_hi fec_lo mod transmission-mode guard-interval
21. # ABC VHF12
22. T 226500000 7MHz 3/4 NONE QAM64 8k 1/16 NONE
23. # Seven VHF6
24. T 177500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
25. # Nine VHF8
26. T 191625000 7MHz 3/4 NONE QAM64 8k 1/16 NONE
27. # Ten VHF11
28. T 219500000 7MHz 3/4 NONE QAM64 8k 1/16 NONE
29. # SBS UHF34
30. T 571500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
31. # D44 UHF35 (testing)
32. T 578500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
Trying the offsets yielded no results.
E-mail: jurgen at bccomputers.com.au
The contents of this email are confidential and may be legally privileged.
If you are not the intended recipient, please do not read, save, forward,
disclose or copy the contents of this email. If you receive this email in
error please advise by return email and delete immediately.
linux-dvb mailing list
linux-dvb at linuxtv.org
iii / Trisys Engineering
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the linux-dvb