[linux-dvb] DiB3000MC rewritten and MT2060 is ready to go into
castet.matthieu at free.fr
Fri Aug 18 18:33:14 CEST 2006
Patrick Boettcher wrote:
> On Thu, 17 Aug 2006, matthieu castet wrote:
>>>>Are you running on USB2.0?
>>>On usb2.0 it seems to work (but the configuration is a bit different).
>>>Is there a way to check if the usb bandwidht don't overflow because of bad
> So OK, it is definitely only the PID filter functionality somewhere. It
> can be the dib3000mc or the use of the interface.
> It will only be a small fix and there is only a few people having only
> USB1.1. It is save to merge it into mainline and then send a patch for
> fixing later.
> How are you coding abilities? Can you check if dib3000mc_pid_parse is
> called with onoff 1 and if the bit is set correcly by reading it back.
Yes it is set correctly, but look what you do in dib3000mc_set_output_mode :
case OUTMODE_MPEG2_FIFO: // e.g. USB feeding
elecout = 3;
/*ADDR @ 206 :
P_smo_error_discard [1;6:6] = 0
P_smo_rs_discard [1;5:5] = 0
P_smo_pid_parse [1;4:4] = 0
^^^^^^^^ ooppps we don't whant to touch this one : it is set by
P_smo_fifo_flush [1;3:3] = 0
P_smo_mode [2;2:1] = 11
P_smo_ovf_prot [1;0:0] = 0
smo_reg = (0 << 6) | (0 << 5) | (0 << 4) | (0
<< 3) |(3 << 1) | 0;
fifo_threshold = 512;
outmode = 5;
If I put smo_reg = (0 << 6) | (0 << 5) | (1 << 4) | (0 << 3) |(3 << 1) | 0;
it works :)
There is 2 solutions to solve the problem :
- smo_reg is only set at init time
- we don't touch bit 4 in dib3000mc_set_output_mode
More information about the linux-dvb