[linux-dvb] Avermedia 777 / SAA7134 Remote Control?

Andrew Lyon andrew.lyon at gmail.com
Tue Aug 29 22:40:33 CEST 2006


Hi,

Is the remote control supported with Avermedia 777 / SAA7134 ? The
device is working really well using latest v4l mercurial sources, this
is the dmesg output from modprobe saa7134_dvb:

saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 18 (level, low) -> IRQ 18
saa7134[0]: found at 0000:05:02.0, rev: 1, irq: 18, latency: 32, mmio:
0xf9101000
saa7134[0]: subsystem: 1461:2c05, board: AverTV DVB-T 777 [card=85,autodetected]
saa7134[0]: board init: gpio is 2f800
saa7134[0]: i2c eeprom 00: 61 14 05 2c 00 00 00 00 00 00 00 00 00 00 00 00
saa7134[0]: i2c eeprom 10: 00 ff 82 0e ff 20 ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 20: 01 40 01 02 02 03 03 01 08 ff 00 a8 ff ff ff ff
saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 40: ff 32 00 c0 86 1e ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
saa7134[0]: avertv 777 dvb setup
DVB: registering new adapter (saa7134[0]).
DVB: registering frontend 0 (Zarlink MT352 DVB-T)...

Any suggestions? Ive tried modprobe saa7134 ir_debug=1 but it didnt
appear  to have much effect.

I have another card (Technotrend S1500+CI) for which I load budget_ci
module, with that card I can see the ir device being created:

input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input4

But the remote for this card has few buttons and I would like to try
the one that came with the Avermedia 777.

Thanks
Andy



More information about the linux-dvb mailing list