[linux-dvb] Pinnacle PCTV Hybrid Pro Stick 330E

Markus Rechberger mrechberger at gmail.com
Tue Dec 5 23:20:17 CET 2006


Hi,

Micronas will probably release a driver for the drx3975d DVB-T
demodulator within the next few weeks so let's wait for it..
This will be needed to get DVB-T work with that device.

Markus

On 12/5/06, Arno Reinhofer <arno at fladi.at> wrote:
> Hi Markus,
>
> I tried again today with new software and it recognized my stick without
> the need to modify sourcecode.
> But DVB mode still doesn't work (analog does). I don't know if it should
> or is still in progess.
> This is my dmesg output. If I can help somehow plz let me know.
>
> #modprobe em2880-dvb
>
> em28xx v4l2 driver version 0.0.1 loaded
> em28xx new video device (2304:0226): interface 0, class 255
> em28xx #0: Alternate settings: 8
> em28xx #0: Alternate setting 0, max size= 0
> em28xx #0: Alternate setting 1, max size= 0
> em28xx #0: Alternate setting 2, max size= 1448
> em28xx #0: Alternate setting 3, max size= 2048
> em28xx #0: Alternate setting 4, max size= 2304
> em28xx #0: Alternate setting 5, max size= 2580
> em28xx #0: Alternate setting 6, max size= 2892
> em28xx #0: Alternate setting 7, max size= 3072
> input: em2880/em2870 remote control as /class/input/input7
> em28xx-input.c: remote control handler attached
> attach_inform: eeprom detected.
> em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 26 02 d0 12 5c 03 8e 16 a4 1c
> em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00
> em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00
> em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
> em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00
> em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
> em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03
> em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 33 00 33 00 30 00
> em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 36 00 31 00 30 00 30 00
> em28xx #0: i2c eeprom b0: 31 00 30 00 30 00 33 00 37 00 36 00 37 00 00 00
> em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> EEPROM ID= 0x9567eb1a
> Vendor/Product ID= 2304:0226
> AC97 audio (5 sample rates)
> 500mA max power
> Table at 0x27, strings=0x168e, 0x1ca4, 0x246a
> tuner 1-0061: chip found @ 0xc2 (em28xx #0)
> attach inform (default): detected I2C address c2
> Tuner: setting up tuner core extension for: Xceive 3028 Tuner
> Loading base firmware: xc3028_init0.i2c.fw
> Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw
> attach_inform: tvp5150 detected.
> tvp5150 1-005c: tvp5150am1 detected.
> em28xx-video.c: requesting em28xx-audio!
> em28xx-video.c: requesting em2880-dvb!
> em28xx #0: V4L2 VBI device registered as /dev/vbi0
> em28xx #0: V4L2 device registered as /dev/video0
> em28xx #0: Found Pinnacle Hybrid Pro (2)
> usbcore: registered new driver em28xx
> em2880-dvb.c: DVB Init
> em2880-dvb.c: unsupported device
> em2880-dvb.c: failed initializing zl10353 DVB-T demodulator
> em2880-dvb.c: retrying with mt352 DVB-T demodulator
> FIXME: Write failed, backtrace:
> ===============================
> 7f
> ================================
> mt352_read_register: readreg error (reg=127, ret==-19)
> em2880-dvb.c: no luck with mt352 demodulator, not attaching em2880-dvb
> em2880-dvb.c: DVB-T demodulator not reachable, did you try "modprobe
> em28xx device_mode=1"
> Em28xx: Initialized (Em2880 DVB Extension) extension
>
> Markus Rechberger wrote:
> > Hi,
> >
> > just wait a few more days, my testdevice should arrive soon then I'll
> > add support for it.
> >
> > cheers,
> > Markus
> >
> > On 11/28/06, Arno Reinhofer <arno at fladi.at> wrote:
> >> Hi,
> >>
> >> I was just wondering if anything happened for Pinnacle PCTV Hybrid Pro
> >> Stick 330E.
> >> I found a thread about this but with no result.
> >>
> >> I added a line in em28xx-cards to recognize my stick (id: 0x2304/0x226)
> >> and then tried out and could get analog tv running, but no audio and no
> >> digital video.
> >>
> >> How can I get things running? Can I help with anything?
> >>
> >> cheers,
> >> Arno
> >>
> >> _______________________________________________
> >> linux-dvb mailing list
> >> linux-dvb at linuxtv.org
> >> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> >>
> >
> >
>


-- 
Markus Rechberger



More information about the linux-dvb mailing list