[linux-dvb] can't get an output from driver

jean-Yves F. Barbier 7ukwn at free.fr
Mon Dec 25 19:18:28 CET 2006


debian sid
krnl 2.6.18.2
latest v4l-dvb hg updated
Hauppauge HVR-1300 (alone on IRQ 10)
========================

Hi folks,

I succesfully installed the driver and reboot, as I noticed that just 
cx88xx, cx8800, cx8802 and cx88-alsa where modprobed @ boot,
I made a script that rmmod all drivers then modprobe: 
cx88-dvb, cx88-blackbird & cx88-alsa 
(because I noticed that if I insert cx88-blackbird first, tveeprom
says  "Huh, no eeprom present (err=-121)" )

But when I make a: 
$> dvbsnoop -s pidscan
It longs about one minute and doesn't ouput anything

Could you help me to make it work properly?

Thanks in advance,
JY



Here is the dmesg result:

Linux video capture interface: v2.00
cx2388x v4l2 driver version 0.0.6 loaded
PCI: Enabling device 0000:00:0f.0 (0010 -> 0012)
ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKC] -> GSI 10 (level, low) ->
      IRQ 10
CORE cx88[0]: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300   
      DVB-T/Hybrid MPEG Encoder [card=56,autodetected]
TV tuner 63 at 0x1fe, Radio tuner -1 at 0x1fe
tveeprom 0-0050: Hauppauge model 96019, rev C2A0, serial# 94470
tveeprom 0-0050: MAC address is 00-0D-FE-01-71-06
tveeprom 0-0050: tuner model is Philips FMD1216ME (idx 100, type 63)
tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K)  
      ATSC/DVB Digital (eeprom 0xf4)
tveeprom 0-0050: audio processor is CX882 (idx 33)
tveeprom 0-0050: decoder processor is CX882 (idx 25)
tveeprom 0-0050: has radio, has IR remote
cx88[0]: hauppauge eeprom: model=96019
input: cx88 IR (Hauppauge WinTV-HVR130 as /class/input/input5
cx88[0]/0: found at 0000:00:0f.0, rev: 5, irq: 10, latency: 96, mmio:
      0xe7000000
tuner 0-0061: chip found @ 0xc2 (cx88[0])
tuner 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
tuner 0-0063: chip found @ 0xc6 (cx88[0])
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
cx88[0]/2: cx2388x 8802 Driver Manager
PCI: Enabling device 0000:00:0f.2 (0010 -> 0012)
ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [LNKC] -> GSI 10 (level, low) ->
      IRQ 10
cx88[0]/2: found at 0000:00:0f.2, rev: 5, irq: 10, latency: 96, mmio:
      0xe5000000
cx2388x blackbird driver version 0.0.6 loaded
cx8802_register_driver() ->registering driver type=blackbird access=shared
CORE cx88[0]: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300
      DVB-T/Hybrid MPEG Encoder [card=56]
cx88[0]/2: cx23416 based mpeg encoder (blackbird reference design)
cx88[0]/2: registered device video1 [mpeg]
cx2388x dvb driver version 0.0.6 loaded
cx8802_register_driver() ->registering driver type=dvb access=shared
CORE cx88[0]: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 
DVB-T/Hybrid MPEG Encoder [card=56]
cx88[0]/2: cx2388x based dvb card
DVB: registering new adapter (cx88[0]).
DVB: registering frontend 0 (Conexant CX22702 DVB-T)...
cx2388x alsa driver version 0.0.6 loaded
PCI: Enabling device 0000:00:0f.1 (0010 -> 0012)
ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [LNKC] -> GSI 10 (level, low) ->
      IRQ 10
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards



More information about the linux-dvb mailing list