[linux-dvb] [PATCH] Remove debug messages

[Manu Abraham]

Applied.

Thanks,
Manu


Holger Schurig wrote:
> # HG changeset patch
> # Node ID 01c1e2031e44d8be87082a9ab6a30cc4033acfe8
> # Parent  65c96cb81e787b0a7c92d7f5a551535775cdfa5d
> Remove debug messages
>
> From:  <holgerschurig at gmx.de>
>
>
> This changes some superfluous printk statements that would
> overflow the current virtual console.
>
>
> Signed-off-by:  <holgerschurig at gmx.de>
>
> diff -r 65c96cb81e78 -r 01c1e2031e44 linux/drivers/media/dvb/bt8xx/dvb-bt8xx.c
> --- a/linux/drivers/media/dvb/bt8xx/dvb-bt8xx.c	Sat Feb 11 08:13:01 2006 -0200
> +++ b/linux/drivers/media/dvb/bt8xx/dvb-bt8xx.c	Sat Feb 11 15:28:48 2006 +0100
> @@ -199,7 +199,7 @@ static int cx24108_pll_set(struct dvb_fr
>  		0x00120000,0x00140000};
>  
>  	#define XTAL 1011100 /* Hz, really 1.0111 MHz and a /10 prescaler */
> -	printk("cx24108 debug: entering SetTunerFreq, freq=%d\n",freq);
> +	dprintk("cx24108 debug: entering SetTunerFreq, freq=%d\n",freq);
>  
>  	/* This is really the bit driving the tuner chip cx24108 */
>  
> @@ -210,7 +210,7 @@ static int cx24108_pll_set(struct dvb_fr
>  
>  	/* decide which VCO to use for the input frequency */
>  	for(i=1;(i<sizeof(osci)/sizeof(osci[0]))&&(osci[i]<freq);i++);
> -	printk("cx24108 debug: select vco #%d (f=%d)\n",i,freq);
> +	dprintk("cx24108 debug: select vco #%d (f=%d)\n",i,freq);
>  	band=bandsel[i];
>  	/* the gain values must be set by SetSymbolrate */
>  	/* compute the pll divider needed, from Conexant data sheet,
> @@ -226,7 +226,7 @@ static int cx24108_pll_set(struct dvb_fr
>  	    ((a&0x1f)<<11);
>  	/* everything is shifted left 11 bits to left-align the bits in the
>  	   32bit word. Output to the tuner goes MSB-aligned, after all */
> -	printk("cx24108 debug: pump=%d, n=%d, a=%d\n",pump,n,a);
> +	dprintk("cx24108 debug: pump=%d, n=%d, a=%d\n",pump,n,a);
>  	cx24110_pll_write(fe,band);
>  	/* set vga and vca to their widest-band settings, as a precaution.
>  	   SetSymbolrate might not be called to set this up */
>
>