[linux-dvb] RE: Twinhan VisionPlus VP-TER-3040-B, not working with CI, 2.6.15-r1

tomas tomas at riverman.com
Tue Feb 21 02:24:21 CET 2006


Hi,
I have tried to modify the channel.conf to work with ca_zap. 
I have not found what format it should be for ca_zap -t ter option. 
I running on linux-2.6.15-gentoo-r1 and using linuxtv-dvb-apps-1.1.0
My cazap.conf looks like this:

ZTV:706000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1199:1198:1190

( This would be the same line as in my channel.conf that I use for tzap )
The error is: ERROR: transmission_mode field syntax error
I have tryied different things but non have been working for me.

Pleas give me some hints where to find more info or if someone has a working file for the "-t ter", send it here.

Do I need to send more logs? 

And I can tune in free channels when My CI is connected

Thanks in advance, Tomas
>
>Hi,
>I have a Twinhan VisionPlus VP-TER-3040-B and using 2.6.15-r1 kernel.
>My problem is that I can only tune in channels when the CI is disconnected.
>Some hints what I could do to make it work?
>
>Here is what ca_zap tells me (after tzap has found the channel) and dmesg:
>
> $ ca_zap -c channels.conf  -t ter -n ZTV
> Using Adpater=[/dev/dvb/adapter0]
>  Frontend=[/dev/dvb/adapter0/frontend0]
>  Demux=[/dev/dvb/adapter0/demux0]
>  Slot=[/dev/dvb/adapter0/ca0]
> Parsing channels.conf
> Terrestrial frontend
> ERROR: transmission_mode field syntax error
> Service ID=[0]
> parse_pat: ----------------->parse PAT section
> parse_pat: PAT => Section Length=[53], TS ID=[1111]
> parse_si: PMT PID = [16]
> parse_si: PAT: Close Demux /dev/dvb/adapter0/demux0
>
>Or ...
>
> $ ca_zap -c channels.conf  -n ZTV
> Using Adpater=[/dev/dvb/adapter0]
>  Frontend=[/dev/dvb/adapter0/frontend0]
>  Demux=[/dev/dvb/adapter0/demux0]
>  Slot=[/dev/dvb/adapter0/ca0]
> Parsing channels.conf
> parse_pat: ----------------->parse PAT section
> parse_pat: PAT => Section Length=[53], TS ID=[1111]
> parse_si: PMT PID = [16]
> parse_si: PAT: Close Demux /dev/dvb/adapter0/demux0
>
>And this is what I got from dmesg
> ...
> i2c /dev entries driver
> Linux video capture interface: v1.00
> bttv: driver version 0.9.16 loaded
> bttv: using 8 buffers with 2080k (520 pages) each for capture
> bttv: Bt8xx card found (0).
> ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 9 (level,  low) -> IRQ 9 
> bttv0: Bt878 (rev 17) at 0000:00:09.0, irq: 9, latency: 32, mmio: 0xe7000000
> bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 1822:0001
> bttv0: using: Twinhan DST + clones [card=113,autodetected]
> bttv0: gpio: en=00000000, out=00000000 in=00f500fd [init]
> bttv0: using tuner=4
> bttv0: add subdevice "dvb0"
> bt878: AUDIO driver version 0.0.0 loaded
> bt878: Bt878 AUDIO function found (0).
> ACPI: PCI Interrupt 0000:00:09.1[A] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
> bt878(0): Bt878 (rev 17) at 00:09.1, irq: 9, latency: 32, memory: 0xe6800000
> DVB: registering new adapter (bttv0).
> dst_get_device_id: Recognise [DTT-CI]
>
> DST type flags : 0x1 newtuner 0x2 ts204 0x10 firmware version = 2
> dst_get_mac: MAC Address=[00:08:ca:17:cd:00]
> dst_ca_attach: registering DST-CA device
> DVB: registering frontend 0 (DST DVB-T)...
> ...
>
>regards,
>Tomas
>
>
>
	






More information about the linux-dvb mailing list