[linux-dvb] AVerTV Hybrid+FM pci

SNOPMAIL at terra.es SNOPMAIL at terra.es
Tue Jan 10 00:14:57 CET 2006


Hi,

I've just bought an AVerTV Hybrid+FM pci card just to find out it has no linux support yet. I met mkrufky at irc (nice guy by the way) who told me to mail lspci -vn output to v4l mailing lists. So, here it is.

I apologise for any inconvenience since I'm sending this mail to both v4l and dvb lists.

*Notice that there's also a Best Buy (bt878 based card) on the system.

SnOp

******************* lscpi -vn output ***********************
pvr:/home/snop # lspci -vn
00:00.0 Class 0600: 8086:2530 (rev 04)
Flags: bus master, fast devsel, latency 0
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0

00:01.0 Class 0604: 8086:2532 (rev 04)
Flags: bus master, 66MHz, fast devsel, latency 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: fc900000-fe9fffff
Prefetchable memory behind bridge: ec500000-f46fffff

00:1e.0 Class 0604: 8086:244e (rev 04)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: f4700000-f47fffff

00:1f.0 Class 0601: 8086:2440 (rev 04)
Flags: bus master, medium devsel, latency 0

00:1f.1 Class 0101: 8086:244b (rev 04) (prog-if 80 [Master])
Subsystem: 8086:4d44
Flags: bus master, medium devsel, latency 0
I/O ports at ffa0 [size=16]

00:1f.2 Class 0c03: 8086:2442 (rev 04)
Subsystem: 8086:4d44
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at ef80 [size=32]

00:1f.3 Class 0c05: 8086:2443 (rev 04)
Subsystem: 8086:4d44
Flags: medium devsel, IRQ 9
I/O ports at efa0 [size=16]

00:1f.5 Class 0401: 8086:2445 (rev 04)
Subsystem: 8086:4d44
Flags: bus master, medium devsel, latency 0, IRQ 9
I/O ports at e800 [size=256]
I/O ports at ef00 [size=64]

01:00.0 Class 0300: 10de:0172 (rev a3)
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 11
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Memory at f0000000 (32-bit, prefetchable) [size=64M]
Memory at f4680000 (32-bit, prefetchable) [size=512K]
Expansion ROM at fe9e0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 2.0

02:01.0 Class 0c03: 1033:0035 (rev 41) (prog-if 10)
Subsystem: 8086:4d44
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at feafd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2

02:01.1 Class 0c03: 1033:0035 (rev 41) (prog-if 10)
Subsystem: 8086:4d44
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at feafe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2

02:01.2 Class 0c03: 1033:00e0 (rev 02) (prog-if 20)
Subsystem: 8086:4d44
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at feaffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2

02:0a.0 Class 0400: 109e:036e (rev 11)
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at f47fe000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2

02:0a.1 Class 0480: 109e:0878 (rev 11)
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at f47ff000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2

02:0c.0 Class 0480: 1131:7133 (rev d1)
Subsystem: 1461:2c00
Flags: bus master, medium devsel, latency 32, IRQ 9
Memory at feaff000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [40] Power Management version 2

02:0d.0 Class 0200: 10ec:8139 (rev 10)
Subsystem: 10ec:8139
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at d800 [size=256]
Memory at feaff800 (32-bit, non-prefetchable) [size=256]
Expansion ROM at f4700000 [disabled] [size=64K]

******************* dmesg output ***********************
dmesg
Linux version 2.6.13-15.7-default (geeko at buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Nov 29 14:32:29 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000ffc0000 (usable)
BIOS-e820: 000000000ffc0000 - 000000000fff8000 (ACPI data)
BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
On node 0 totalpages: 65472
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61376 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000ff980
ACPI: RSDT (v001 D850MV MV85010A 0x20020517 MSFT 0x00001011) @ 0x0fff0000
ACPI: FADT (v001 D850MV MV85010A 0x20020517 MSFT 0x00001011) @ 0x0fff1000
ACPI: MADT (v001 D850MV MV85010A 0x20020517 MSFT 0x00001011) @ 0x0ffe3809
ACPI: DSDT (v001 D850MV MV85010A 0x00000005 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: local apic disabled
Allocating PCI resources starting at 10000000 (gap: 10000000:eec00000)
Built 1 zonelists
Kernel command line: root=/dev/hda2 vga=0x317 selinux=0 resume=/dev/hda1 splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 1994.215 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 253656k/261888k available (2029k kernel code, 7560k reserved, 695k data, 204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3992.50 BogoMIPS (lpj=7985008)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
mtrr: v2.0 (20020519)
CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 1748k freed
ACPI: Looking for DSDT in initrd... not found!
not found!
ACPI: setting ELCR to 0200 (from 0e20)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2
PCI: Using configuration type 1
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev at vger.kernel.org cc hadi at cyberus.ca)
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: fc900000-fe9fffff
PREFETCH window: ec500000-f46fffff
PCI: Bridge: 0000:00:1e.0
IO window: d000-dfff
MEM window: fea00000-feafffff
PREFETCH window: f4700000-f47fffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1136845572.412:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xf0000000, mapped to 0xd0880000, using 6144k, total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:e700
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture... silentjpeg size 76011 bytes,...found (1024x768, 12703 bytes, v3).
Console: switching to colour frame buffer device 127x44
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
mice: PS/2 mouse device common for all mice
input: PC Speaker
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.38
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Using IPI Shortcut mode
ACPI wakeup devices:
PBTN PCI1 NEC0 NEC1 NEC2 UAR1 UAR2 USB USB2 AC9 SMB
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 204k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 4
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
input: PS/2 Generic Mouse on isa0060/serio1
hda: ST360021A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes not supported
hda: hda1 hda2
Probing IDE interface ide1...
hdc: LITEON DVD-ROM LTD163D, ATAPI CD/DVD-ROM drive
hdd: LITE-ON LTR-32125W, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: CPU0 (power states: C1[C1])
Attempting manual resume
swsusp: Suspend partition has wrong signature?
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 1984kB Cache, UDMA(33)
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS mounting filesystem hda2
Ending clean XFS mount for filesystem: hda2
bootsplash: status on console 0 changed to on
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Adding 795176k swap on /dev/hda1. Priority:-1 extents:1
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (interrupt-driven).
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
hw_random hardware driver 1.0.0 loaded
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel i850 Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
Linux video capture interface: v1.00
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:02:01.0: OHCI Host Controller
ohci_hcd 0000:02:01.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:02:01.0: irq 10, io mem 0xfeafd000
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: UHCI Host Controller
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1f.2: irq 10, io base 0x0000ef80
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 2-0:1.0: over-current change on port 2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:02:01.1[B] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:02:01.1: OHCI Host Controller
ohci_hcd 0000:02:01.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:02:01.1: irq 11, io mem 0xfeafe000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ivtv_tveeprom: module not supported by Novell, setting U taint flag.
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:02:01.2[C] -> Link [LNKH] -> GSI 5 (level, low) -> IRQ 5
ehci_hcd 0000:02:01.2: EHCI Host Controller
ehci_hcd 0000:02:01.2: new USB bus registered, assigned bus number 4
ehci_hcd 0000:02:01.2: irq 5, io mem 0xfeaffc00
ehci_hcd 0000:02:01.2: USB 2.0 initialized, EHCI 0.95, driver 10 Dec 2004
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
ACPI: PCI Interrupt 0000:02:0d.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
eth0: RealTek RTL8139 at 0xd11b6800, 00:00:1c:d1:ed:00, IRQ 11
eth0: Identified 8139 chip type 'RTL-8139C'
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:1f.5 to 64
saa7130/34: v4l2 driver version 0.2.14 loaded
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
intel8x0_measure_ac97_clock: measured 53062 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
saa7133[0]: found at 0000:02:0c.0, rev: 209, irq: 9, latency: 32, mmio: 0xfeaff000
saa7133[0]: subsystem: 1461:2c00, board: UNKNOWN/GENERIC [card=0,autodetected]
saa7133[0]: board init: gpio is 2400
saa7133[0]: dsp access wait timeout [bit=WRR]
saa7133[0]: dsp access wait timeout [bit=WRR]
saa7133[0]: dsp access wait timeout [bit=WRR]
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
bttv0: Bt878 (rev 17) at 0000:02:0a.0, irq: 11, latency: 32, mmio: 0xf47fe000
bttv0: using: Askey CPH061/ BESTBUY Easy TV (bt878) [card=62,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00ffc0ff [init]
i2c-algo-bit.o: (0) scl=1, sda=1
i2c-algo-bit.o: (1) scl=1, sda=0
i2c-algo-bit.o: (2) scl=1, sda=1
i2c-algo-bit.o: (3) scl=0, sda=1
i2c-algo-bit.o: (4) scl=1, sda=1
i2c-algo-bit.o: bt878 #0 [sw] passed test.
bttv0: using tuner=37
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
saa7133[0]: i2c eeprom 00: 61 14 00 2c 00 00 00 00 00 00 00 00 00 00 00 00
saa7133[0]: i2c eeprom 10: 00 ff 82 0e ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 02 02 03 03 01 08 ff 00 a3 ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
btaudio: driver version 0.7 loaded [digital+analog]
: chip found @ 0xc2 (bt878 #0 [sw])
tuner 1-0061: type set to 37 (LG PAL (newer TAPC series))
: chip found @ 0xc0 (saa7133[0])
: TEA5767 detected.
tuner 2-0060: type set to 62 (Philips TEA5767HN FM Radio)
bttv0: registered device video1
bttv0: registered device vbi1
bttv0: PLL: 28636363 => 35468950 .. ok
ACPI: PCI Interrupt 0000:02:0a.1[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
btaudio: Bt878 (rev 17) at 02:0a.1, irq: 11, latency: 32, mmio: 0xf47ff000
btaudio: using card config "default"
btaudio: registered device dsp0 [digital]
btaudio: registered device dsp1 [analog]
btaudio: registered device mixer0
bt878: AUDIO driver version 0.0.0 loaded
lirc_dev: module not supported by Novell, setting U taint flag.
lirc_dev: IR Remote Control driver registered, at major 60
lirc_gpio: module not supported by Novell, setting U taint flag.
The bttv_* interface is obsolete and will go away,
please use the new, sysfs based interface instead.
lirc_gpio (-1): card type 0x3e, id 0x0
lirc_dev: lirc_register_plugin: sample_rate: 10
lirc_gpio (0): driver registered
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
eth0: link down
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PBTN]
NET: Registered protocol family 10
Disabled Privacy Extensions on device c036b920(lo)
IPv6 over IPv4 tunneling driver
ALSA sound/core/oss/mixer_oss.c:1274: unable to register OSS mixer device 0:0
ALSA sound/core/oss/pcm_oss.c:2446: unable to register OSS PCM device 0:0
NET: Registered protocol family 23
IrCOMM protocol (Dag Brattli)
IA-32 Microcode Update Driver: v1.14
IA-32 Microcode Update Driver v1.14 unregistered
powernow: This module only works with AMD K7 CPUs
subfs 0.9
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
subfs: unsuccessful attempt to mount media (256)
eth0: no IPv6 routers present
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1





Prueba el Nuevo Correo Terra; Seguro, Rápido, Fiable.




-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20060110/ffe57717/attachment-0001.htm


More information about the linux-dvb mailing list