[linux-dvb] SkyStar2 reporting unknown FlexCop revision

Pavel Paprok ppaprok at applet.cz
Thu Jan 19 02:24:21 CET 2006


Hi,
I just try my first sat card, it is a SkyStar2, on card is printed exactly:

MODEL: SKYSTAR 2
P/N 92105-20003
REV: 2.6C

unfortunatelly in lastest 2.6 kernel (exactly 2.6.15 vanilla without any extra patches)
card seems to not work, b2c2 driver reporting in log:

Jan 18 19:06:42 dvb kernel: b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Jan 18 19:06:42 dvb kernel: flexcop-pci: will use the HW PID filter.
Jan 18 19:06:42 dvb kernel: flexcop-pci: card revision 1
Jan 18 19:06:42 dvb kernel: ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 185
Jan 18 19:06:42 dvb kernel: b2c2-flexcop: unkown FlexCop Revision: f. Please report the linux-dvb at linuxtv.org.
Jan 18 19:06:42 dvb kernel: DVB: registering new adapter (FlexCop Digital TV device).
Jan 18 19:06:42 dvb kernel: b2c2-flexcop: reading of MAC address failed.
Jan 18 19:06:42 dvb kernel:
Jan 18 19:06:42 dvb kernel: b2c2-flexcop: i2c master_xfer failed
Jan 18 19:06:42 dvb last message repeated 2 times
Jan 18 19:06:42 dvb kernel: mt352_read_register: readreg error (reg=127, ret==-121)
Jan 18 19:06:42 dvb kernel: b2c2-flexcop: i2c master_xfer failed
Jan 18 19:06:42 dvb kernel: i2c_readbytes: i2c read error (addr 0a, err == -121)
Jan 18 19:06:42 dvb kernel: b2c2-flexcop: i2c master_xfer failed
Jan 18 19:06:42 dvb kernel: lgdt330x: i2c_read_demod_bytes: addr 0x59 select 0x02 error (ret == -121)
Jan 18 19:06:42 dvb kernel: b2c2-flexcop: i2c master_xfer failed
Jan 18 19:06:42 dvb kernel: b2c2-flexcop: i2c master_xfer failed
Jan 18 19:06:42 dvb kernel: stv0297_readreg: readreg error (reg == 0x80, ret == -22)
Jan 18 19:06:42 dvb kernel: b2c2-flexcop: i2c master_xfer failed
Jan 18 19:06:42 dvb kernel: mt312_read: ret == -121
Jan 18 19:06:42 dvb kernel: b2c2-flexcop: no frontend driver found for this B2C2/FlexCop adapter
Jan 18 19:06:42 dvb kernel: ACPI: PCI interrupt for device 0000:01:05.0 disabled


are there some tips what can I do with this problem??

system is FedoraCore3, note that also with original fedora
rpm kernels for FC3 (2.6.9 and update 2.6.12 both
with "skystar2" module yet) card not working.
and also with latest vanilla kernel with v4l-dvb
modules from cvs snapshot v4l-dvb-2006011 no luck :-(

pavel

next info about card from lspci:

01:05.0 Class 0080: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 01)
        Subsystem: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+
        Interrupt: pin A routed to IRQ 185
        Region 0: Memory at fd900000 (32-bit, non-prefetchable) [size=64K]
        Region 1: I/O ports at bc00 [size=32]

or numerically

01:05.0 Class 0080: 13d0:2103 (rev 01)
        Subsystem: 13d0:2103
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+
        Interrupt: pin A routed to IRQ 185
        Region 0: Memory at fd900000 (32-bit, non-prefetchable) [size=64K]
        Region 1: I/O ports at bc00 [size=32]


and about loaded modules:

b2c2_flexcop_pci       12952  0
b2c2_flexcop           33164  1 b2c2_flexcop_pci
mt352                  10244  1 b2c2_flexcop
bcm3510                13956  1 b2c2_flexcop
stv0299                13960  1 b2c2_flexcop
dvb_core               80936  2 b2c2_flexcop,stv0299
dvb_pll                14852  1 b2c2_flexcop
nxt2002                12420  1 b2c2_flexcop
stv0297                11520  1 b2c2_flexcop
lgdt330x               11676  1 b2c2_flexcop
mt312                  11396  1 b2c2_flexcop
i2c_core               23936  9 i2c_i801,b2c2_flexcop,mt352,bcm3510,stv0299,nxt2002,stv0297,lgdt330x,mt312


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20060119/2cf391c0/attachment.htm


More information about the linux-dvb mailing list