[linux-dvb] DVB-S startup

[Ryan Mak]

Hello.
 
 I am running FC3 with the dvb drivers that came with the installation. Not sure why the dvb directories are not created under /dev at startup by udev. Everything seems to load fine for the dvb driver and I do have the udev rules for dvb after upgrading to the recent udev version. Any feedback on this matter would be appreciated.
 
 Regards.
 -Ryan
 
 
 # lspci -v
 00:09.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
         Subsystem: Technotrend Systemtechnik GmbH Technotrend/Hauppauge DVB card rev2.1
         Flags: bus master, medium devsel, latency 64, IRQ 10
         Memory at ffeff800 (32-bit, non-prefetchable) [size=512]
 
 # lsmod
 
 ipv6                  232577  8
 uhci_hcd               31449  0
 dvb_ttpci              80517  0
 dvb_core               86121  1 dvb_ttpci
 saa7146_vv             44865  1 dvb_ttpci
 video_buf              21701  1 saa7146_vv
 saa7146                17805  2 dvb_ttpci,saa7146_vv
 v4l1_compat            11973  1 saa7146_vv
 v4l2_common             5953  1 saa7146_vv
 videodev                9664  1 saa7146_vv
 ttpci_eeprom            2497  1 dvb_ttpci
 
 # dmesg
 
 Linux video capture interface: v1.00
 saa7146: register extension 'dvb'.
 ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10
 saa7146: found saa7146 @ mem 1083c800 (revision 1, irq 10) (0x13c2,0x0003).
 DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1).
 Technotrend/Hauppauge PCI rev2.1 adapter 0 has MAC addr = 00:d0:5c:23:6f:1c
 gpioirq unknown type=0 len=0
 DVB: AV7110(0) - firm f0240009, rtsl b0250018, vid 71010068, app 80002622
 DVB: AV7110(0) - firmware supports CI link layer interface
 av7110(0): Crystal audio DAC detected
 videodev: "av7110" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/
 saa7146_vv: saa7146 (0): registered device video0 [v4l2]
 av7110: found av7110-0.
 
 # cat /etc/udev/rules.d/50-udev.rules
 
 KERNEL="dvb"  Name="dvb0"
 
 KERNEL="dvb0.dvr*",        NAME="dvb/adapter0/dvr%n"
 KERNEL="dvb0.demux*",      NAME="dvb/adapter0/demux%n"
 KERNEL="dvb0.frontend*",   NAME="dvb/adapter0/frontend%n"
 KERNEL="dvb0.audio*",      NAME="dvb/adapter0/audio%n"
 KERNEL="dvb0.ca*",         NAME="dvb/adapter0/ca%n"
 KERNEL="dvb0.osd*",        NAME="dvb/adapter0/osd%n"
 KERNEL="dvb0.net*",        NAME="dvb/adapter0/net%n"
 KERNEL="dvb0.video*",      NAME="dvb/adapter0/video%n"
 
 etc.
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20060122/d9146014/attachment.htm