[linux-dvb] nova-s-plus
Heiner Wulfhorst
Just2blue4u at web.de
Tue Jan 31 02:56:37 CET 2006
Hello everybody!
I'm new to this list, so please don't kill me if i behave wrong! ;)
I'm here because i just bought a hauppauge nova-s-plus dvb-s pci-card.
On windows it seems to work, so hardware should be ok.
On Linux it doesn't seem to be recognized correctly.
After too manyhours of trying, googling, crying, ... i'm here, looking for help.
Please, make my tv-card work!
My Problem:
TVtime only shows a black screen (sometimes with green (vertical) stripes on the left side).
My system:
- kernel-2.6.15 (from kernel-2.6.15-1.1823_FC4.i586.rpm)
- fedora core 4
- hauppauge nova-s-plus dvb-s pci-card
My software already installed:
- dvb-apps-1.1.0
- vdr-1.3.40
- vdradmin-0.97
- tvtime
some more information:
dmesg:
...
Linux video capture interface: v1.00
cx2388x v4l2 driver version 0.0.5 loaded
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
cx88[0]: Your board isn't known (yet) to the driver. You can
cx88[0]: try to pick one of the existing card configs via
cx88[0]: card=<n> insmod option. Updating to the latest
cx88[0]: version might help as well.
cx88[0]: Here is a list of valid choices for the card=<n> insmod option:
cx88[0]: card=0 -> UNKNOWN/GENERIC
cx88[0]: card=1 -> Hauppauge WinTV 34xxx models
cx88[0]: card=2 -> GDI Black Gold
cx88[0]: card=3 -> PixelView
cx88[0]: card=4 -> ATI TV Wonder Pro
cx88[0]: card=5 -> Leadtek Winfast 2000XP Expert
cx88[0]: card=6 -> AverTV Studio 303 (M126)
cx88[0]: card=7 -> MSI TV- at nywhere Master
cx88[0]: card=8 -> Leadtek Winfast DV2000
cx88[0]: card=9 -> Leadtek PVR 2000
cx88[0]: card=10 -> IODATA GV-VCP3/PCI
cx88[0]: card=11 -> Prolink PlayTV PVR
cx88[0]: card=12 -> ASUS PVR-416
cx88[0]: card=13 -> MSI TV- at nywhere
cx88[0]: card=14 -> KWorld/VStream XPert DVB-T
cx88[0]: card=15 -> DViCO FusionHDTV DVB-T1
cx88[0]: card=16 -> KWorld LTV883RF
cx88[0]: card=17 -> DViCO FusionHDTV 3 Gold-Q
cx88[0]: card=18 -> Hauppauge Nova-T DVB-T
cx88[0]: card=19 -> Conexant DVB-T reference design
cx88[0]: card=20 -> Provideo PV259
cx88[0]: card=21 -> DViCO FusionHDTV DVB-T Plus
cx88[0]: card=22 -> pcHDTV HD3000 HDTV
cx88[0]: card=23 -> digitalnow DNTV Live! DVB-T
cx88[0]: card=24 -> Hauppauge WinTV 28xxx (Roslyn) models
cx88[0]: card=25 -> Digital-Logic MICROSPACE Entertainment Center (MEC)
cx88[0]: card=26 -> IODATA GV/BCTV7E
cx88[0]: card=27 -> PixelView PlayTV Ultra Pro (Stereo)
cx88[0]: card=28 -> DViCO FusionHDTV 3 Gold-T
cx88[0]: card=29 -> ADS Tech Instant TV DVB-T PCI
cx88[0]: card=30 -> TerraTec Cinergy 1400 DVB-T
cx88[0]: card=31 -> DViCO FusionHDTV 5 Gold
cx88[0]: card=32 -> AverMedia UltraTV Media Center PCI 550
cx88[0]: card=33 -> Kworld V-Stream Xpert DVD
cx88[0]: card=34 -> ATI HDTV Wonder
cx88[0]: card=35 -> WinFast DTV1000-T
cx88[0]: card=36 -> AVerTV 303 (M126)
CORE cx88[0]: subsystem: 0070:9202, board: UNKNOWN/GENERIC [card=0,autodetected]
TV tuner -1 at 0x1fe, Radio tuner -1 at 0x1fe
cx88[0]/0: found at 0000:00:07.0, rev: 5, irq: 10, latency: 32, mmio: 0xdc000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx2388x blackbird driver version 0.0.5 loaded
...
(dmesg end)
lsmod:
...
cx88_blackbird 19805 0
cx8802 11845 1 cx88_blackbird
cx8800 32333 1 cx88_blackbird
cx88xx 61665 3 cx88_blackbird,cx8802,cx8800
i2c_algo_bit 9289 2 bttv,cx88xx
video_buf 21957 5 bttv,cx88_blackbird,cx8802,cx8800,cx88xx
ir_common 9797 1 cx88xx
tveeprom 15057 2 bttv,cx88xx
i2c_core 21825 5 bttv,tuner,cx88xx,i2c_algo_bit,tveeprom
v4l1_compat 13765 1 cx8800
v4l2_common 5953 2 bttv,cx8800
btcx_risc 5065 4 bttv,cx8802,cx8800,cx88xx
videodev 9665 4 bttv,cx88_blackbird,cx8800,cx88xx
bttv 168881 0
uhci_hcd 33489 0
ehci_hcd 33997 0
tuner 42737 0
...
(lsmod end)
scandvb channels.conf:
"scanning channels.conf
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
main:1882: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such file or directory "
I have created this devices:
ll /dev/dvb/adapter0/
insgesamt 0
crw-rw---- 1 root video 212, 6 31. Jan 02:48 ca0
crw-rw---- 1 root video 212, 4 31. Jan 02:48 demux0
crw-rw---- 1 root video 212, 5 31. Jan 02:48 dvr0
crw-rw---- 1 root video 212, 3 31. Jan 02:48 frontend0
with this script:
#!/bin/sh
# get rid of old DVB API devices; do it twice for good measure...
rm -rf /dev/ost
rm -rf /dev/ost
rm -rf /dev/dvb
rm -rf /dev/dvb
#for major and minor devicenumber see here
#vi /usr/src/linux/Documentation/devices.txt
cd /dev
mkdir dvb
chmod 755 /dev/dvb
cd dvb
mkdir adapter0
cd adapter0
mknod -m 0660 frontend0 c 212 3
mknod -m 0660 demux0 c 212 4
mknod -m 0660 dvr0 c 212 5
mknod -m 0660 ca0 c 212 6
chown root.video /dev/dvb/adapter0/*
(script end)
What else do i need to let this work / how can i get rid of those errors?
If somebody knows something that could help me, please let me know!
I don't want to switch to windows just because of this damn TV-Card... :(
Thanks for reading this and hoping for help,
good night,
Heiner
PS: sorry, i'm german! ;o)
______________________________________________________________
Verschicken Sie romantische, coole und witzige Bilder per SMS!
Jetzt bei WEB.DE FreeMail: http://f.web.de/?mc=021193
More information about the linux-dvb
mailing list