[linux-dvb] Compro, VideoMate U3, 1ME03UQUM15, USB id eb1a:2870

Markus Rechberger mrechberger at gmail.com
Mon Jun 5 20:55:22 CEST 2006


Could you update the repository again and reload the em28xx module?

thanks,
Markus

On 6/5/06, Markus Rechberger <mrechberger at gmail.com> wrote:
> you could scan for a channel in windows and capture the USB Stream
> while doing that.
> If there's a difficult calculation behind it we could build a
> frequency map using the data you are able to capture in Windows.
>
> http://linuxtv.org/v4lwiki/index.php/USBVideo
>
> try to set up a site like:
> http://www.kaiser-linux.li/index.php/Linux_and_TV
>
> Markus
>
> > On 6/5/06, James Cameron <quozl at us.netrek.org> wrote:
> > > On Sun, Jun 04, 2006 at 06:36:54PM +0200, Gunther Mayer wrote:
> > > > Try "modprobe em28xx" and post the results.
> > >
> > > Here's the results of "modprobe em28xx i2c_scan=1"
> > >
> > > Linux video capture interface: v1.00
> > > em28xx v4l2 driver version 0.0.1 loaded
> > > em28xx new video device (eb1a:2870): interface 0, class 255
> > > em28xx #0: Alternate settings: 8
> > > em28xx #0: Alternate setting 0, max size= 0
> > > em28xx #0: Alternate setting 1, max size= 0
> > > em28xx #0: Alternate setting 2, max size= 1448
> > > em28xx #0: Alternate setting 3, max size= 2048
> > > em28xx #0: Alternate setting 4, max size= 2304
> > > em28xx #0: Alternate setting 5, max size= 2580
> > > em28xx #0: Alternate setting 6, max size= 2892
> > > em28xx #0: Alternate setting 7, max size= 3072
> > > em28xx #0: Your board has no eeprom inside it and thus can't
> > > em28xx #0: be autodetected.  Please pass card=<n> insmod option to
> > > em28xx #0: workaround that.  Redirect complaints to the vendor of
> > > em28xx #0: the TV card. Generic type will be used.em28xx #0: Best regards,
> > > em28xx #0:         -- tux
> > > em28xx #0: em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
> > > em28xx #0:     card=0 -> Unknown EM2800 video grabber
> > > em28xx #0:     card=1 -> Generic EM2820 video grabber
> > > em28xx #0:     card=2 -> Terratec Cinergy 250 USB
> > > em28xx #0:     card=3 -> Pinnacle PCTV USB 2
> > > em28xx #0:     card=4 -> Hauppauge WinTV USB 2
> > > em28xx #0:     card=5 -> MSI VOX USB 2.0
> > > em28xx #0:     card=6 -> Terratec Cinergy 200 USB
> > > em28xx #0:     card=7 -> Leadtek Winfast USB II
> > > em28xx #0:     card=8 -> Kworld USB2800
> > > em28xx #0:     card=9 -> Pinnacle Dazzle DVC 90
> > > em28xx #0:     card=10 -> Hauppauge WinTV HVR 900
> > > em28xx #0:     card=11 -> Terratec Hybrid XS
> > > em28xx #0:     card=12 -> Kworld PVR TV 2800 RF
> > > em28xx #0:     card=13 -> Terratec Prodigy XS
> > > em28xx #0:     card=14 -> Videology 20K14XUSB USB2.0
> > > em28xx #0:     card=15 -> Usbgear VD204v9
> > > em28xx #0:     card=16 -> Terratec Cinergy T XS
> > > em28xx #0:     card=17 -> Generic EM2870 video grabber
> > > em28xx #0:     card=18 -> Pinnacle PCTV DVB-T
> > > em28xx #0:     card=19 -> Generic EM2881 video grabber
> > > em28xx #0:     card=20 -> DNT DA2 Hybrid
> > > em28xx #0:     card=21 -> Pinnacle Hybrid Pro
> > > em28xx #0:     card=22 -> Terratec Hybrid XS Secam
> > > em28xx #0:     card=23 -> Hercules Smart TV USB 2.0
> > > em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 70 28 40 12 62 40 6a 1c 00 00
> > > em28xx #0: i2c eeprom 10: 00 00 04 57 0e 1d 00 00 00 00 00 00 00 00 00 00
> > > em28xx #0: i2c eeprom 20: 04 00 00 00 f0 10 01 00 00 00 00 00 5b 00 00 00
> > > em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00
> > > em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > > em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > > em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 1c 03 56 00 69 00
> > > em28xx #0: i2c eeprom 70: 64 00 65 00 6f 00 4d 00 61 00 74 00 65 00 20 00
> > > em28xx #0: i2c eeprom 80: 55 00 33 00 00 00 63 00 65 00 00 00 00 00 00 00
> > > em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > > em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > > em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > > em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > > em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > > em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > > em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > > EEPROM ID= 0x9567eb1a
> > > Vendor/Product ID= eb1a:2870
> > > No audio on board.
> > > 500mA max power
> > > Table at 0x04, strings=0x1c6a, 0x0000, 0x0000
> > > em28xx #0: found i2c device @ 0x1e [zl10353/mt352 dvb-t demodulator]
> > > em28xx #0: found i2c device @ 0xa0 [eeprom]
> > > em28xx #0: Found Generic EM2870 video grabber
> > > usbcore: registered new driver em28xx
> > >
> > > --
> > > James Cameron    mailto:quozl at us.netrek.org     http://quozl.netrek.org/
> > >
> > > _______________________________________________
> > > linux-dvb mailing list
> > > linux-dvb at linuxtv.org
> > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> > >
> >
> >
> > --
> > Markus Rechberger
> >
>
>
> --
> Markus Rechberger
>


-- 
Markus Rechberger



More information about the linux-dvb mailing list