[linux-dvb] REMOTE - DViCO FusionHDTV DVB-T Dual Digital

Jimbo123 jim_1234au at yahoo.com.au
Wed Jun 21 13:03:25 CEST 2006


Hi Craig,

Thanks for your response, all sorted now, the Toggle bit change from 1
to 0 fixed it up - -no idea what it represents.

>From the winlirc site:
[===================]
toggle_bit <bit to toggle>
A bit of the pre_data, code, or post_data that is toggled between one
and zero each time a button is pressed.
[===================]
-whatever that's supposed to mean, guess making it zero, means nothing
is toggled. I also haven't seen it set to 1 in other conf files I've
looked at either.

FYI, it worked clean with lirc-0.8.0 for me.

Won't bother sending my file in,.. next step is the lircrc file.

Thanks again,

Jim.....

On Tue, 2006-06-20 at 03:21 -0700, Craig Cook wrote:
> I removed the lirc packages I had installed (
> lirc-kmdl-2.6.15-1.1831_FC4-0.8.0-55.rhfc4.at
> lirc-0.8.1-cvs20060325_58.rhfc4.at
> lirc-kmdl-2.6.15-1.1833_FC4-0.8.1-cvs20060325_57.rhfc4.at
> lirc-lib-0.8.1-cvs20060325_58.rhfc4.at
> lirc-devices-0.7.0-1.rhfc4.at
> )
> 
> I couldn't remove them all, so left one alone:
> [mythtv at localhost ~]$ rpm -e lirc-lib-0.8.1-cvs20060325_58.rhfc4.at
> error: Failed dependencies:
>         liblirc_client.so.0 is needed by (installed)
> xawtv-3.95-17.rhfc4.at.i386
>         liblirc_client.so.0 is needed by (installed)
> mplayer-1.0-52_pre7try3.rhfc4.at.i386
>         liblirc_client.so.0 is needed by (installed)
> libmyth-0.19-128.rhfc4.at.i386
>         liblirc_client.so.0 is needed by (installed)
> xine-0.99.4-5.fc4.rf.i386
> 
> and compiled lirc 0.8.0 from source.  Recorded my own lircd.conf as
> well.
> I had the same problem as Jim.  
> 
> Press the remote button once and get two responses...
> 
> [mythtv at localhost ~]$ irw
> 000000000001006a 00 right /etc/lircd.conf
> 000000000001006a 00 right /etc/lircd.conf
> 
> I have messed around with repeat/delay settings as well but nothing
> makes a difference.
> 
> Compiled lirc-0.8.1pre1.tar.bz2 but that has the same issues.
> 
> Then I changed  this line in /etc/lircd.conf
> from
>  toggle_bit      1
> to
>  toggle_bit      0
> 
> Now I get one reponse back!!!  (Don't ask me what the toggle_bit does,
> I have no idea, it seems to work now though)
> 
> YAY!
> 
> Time to configure the myth remote settings.
> (I have just sent a copy of my lircd.conf to the lirc project)
> 
> Thanks
> 
> Craig 
> 
> 
> 
> ______________________________________________________________________
> Yahoo! Groups gets better. Check out the new email design. Plus
> there’s much more to come. 
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Send instant messages to your online friends http://au.messenger.yahoo.com 




More information about the linux-dvb mailing list