[linux-dvb] freecom USB dvb-t -- new vendor/product ID 14aa:022a

Mikel Martin mikel.martin at gmail.com
Tue Mar 28 16:43:14 CEST 2006


Much, much better now!!!!!

usb 1-2: new high speed USB device using ehci_hcd and address 2
dvb-usb: found a 'WideView WT-220U PenType Receiver (based on ZL353)' in
cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-wt220u-zl0353-01.fw'
usb 1-2: USB disconnect, address 2
dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
usb 1-2: new high speed USB device using ehci_hcd and address 3
dvb-usb: found a 'WideView WT-220U PenType Receiver (based on ZL353)' in
warm state.
dvb-usb: will use the device's hardware PID filter (table count: 15).
DVB: registering new adapter (WideView WT-220U PenType Receiver (based on
ZL353)).
DVB: registering frontend 0 (WideView USB DVB-T)...
dvb-usb: schedule remote query interval to 300 msecs.
dvb-usb: WideView WT-220U PenType Receiver (based on ZL353) successfully
initialized and connected.
dvb-usb: recv bulk message failed: -110 

Dont't know what the last message stands for, but it now scans for channels.
I'm not getting any channel but may be the problem is with the antenna, I'll
keep on trying I'll let you know when everithing works Ok.

Thank you very much, again , Patrick.

Could you tell me where did you get the firmware form?, is it possible to
obtain it from the logs I posted?, any docs telling how to do it?

Regards,

Mikel Martin


> -----Mensaje original-----
> De: Patrick Boettcher [mailto:patrick.boettcher at desy.de] 
> Enviado el: martes, 28 de marzo de 2006 9:05
> Para: Mikel Martin
> CC: linux-dvb at linuxtv.org
> Asunto: RE: [linux-dvb] freecom USB dvb-t -- new 
> vendor/product ID 14aa:022a
> 
> Hi Mikel,
> 
> On Mon, 27 Mar 2006, Mikel Martin wrote:
> > Much better!!
> 
> > usb 1-2: new high speed USB device using ehci_hcd and address 2
> > dvb-usb: found a 'WideView WT-220U PenType Receiver (based 
> on ZL353)' 
> > in cold state, will try to load a firmware
> > dvb-usb: did not find the firmware file. 
> (dvb-usb-wt220u-zl0353-01.fw) 
> > Please see linux/Documentation/dvb/ for more details on 
> firmware-problems.
> > (-2)
> > usb 1-2: USB disconnect, address 2
> > usb 1-2: new high speed USB device using ehci_hcd and address 3
> > dvb-usb: found a 'WideView WT-220U PenType Receiver (based 
> on ZL353)' 
> > in cold state, will try to load a firmware
> > dvb-usb: downloading firmware from file 
> 'dvb-usb-wt220u-zl0353-01.fw'
> > usb 1-2: USB disconnect, address 3
> > dvb-usb: generic DVB-USB module successfully deinitialized 
> and disconnected.
> > usb 1-2: new high speed USB device using ehci_hcd and address 4
> > dvb-usb: found a 'WideView WT-220U PenType Receiver (based 
> on ZL353)' 
> > in warm state.
> > dvb-usb: will use the device's hardware PID filter (table 
> count: 15).
> > DVB: registering new adapter (WideView WT-220U PenType 
> Receiver (based 
> > on ZL353)).
> > dvb-usb: dvb_dmx_init failed: error -12
> > dvb-usb: WideView WT-220U PenType Receiver (based on ZL353) error 
> > while loading driver (-12)
> 
> This error is typical when you mixed up dvb-modules (dvb-core or
> something) from your kernel distribution and from compiled from hg.
> 
> Please make sure that this is not the case and that all 
> modules are coming from hg and you'll get the 
> dvb-device-nodes created.
> 
> regards,
> Patrick.
> 
> --
>    Mail: patrick.boettcher at desy.de
>    WWW:  http://www.wi-bw.tfh-wildau.de/~pboettch/




More information about the linux-dvb mailing list