[linux-dvb] New Leadtek WinFast DVT Dongle revision!!!

CIJOML cijoml at volny.cz
Wed Nov 8 19:16:08 CET 2006


Hi All,

I got a new Leadtek WinFast DTV Dongle  which looks like the previous, but HAS 
DIFFERENT ID AND DOESN'T WORK WITH CURRENT DRIVER.

I tried to patch drivers to load firmware (change id in v4l/dvb-usb-ids.h), 
but without success:

usb 1-2: new high speed USB device using ehci_hcd and address 6
usb 1-2: configuration #1 chosen from 1 choice
dvb-usb: found a 'Leadtek - USB2.0 Winfast DTV dongle' in cold state, will try 
to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dibusb-6.0.0.8.fw'
dvb-usb: could not stop the USB controller CPU.
dvb-usb: error while transferring firmware (transferred size: -32, block size: 
10)
dvb-usb: firmware download failed at 15 with -22
dvb_usb_dibusb_mc: probe of 1-2:1.0 failed with error -22
usbcore: registered new driver dvb_usb_dibusb_mc

-----------------------


Bus 001 Device 006: ID 0413:6f00 Leadtek Research, Inc.
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x0413 Leadtek Research, Inc.
  idProduct          0x6f00
  bcdDevice            1.00
  iManufacturer           1 DIBCOM
  iProduct                2 STK7700
  iSerial                 3 0000000001
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           46
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           4
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               1
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)


Any help is VERY needed! 

Thanks a lot

Michal



More information about the linux-dvb mailing list