[linux-dvb] Twinhan VP-1022A version 2.0

Marius van den Beek mvdbeek at gmx.de
Sun Nov 12 16:48:39 CET 2006


victor.noname at gmail.com wrote:
> Snapshot of linuxtv from 12.11.06, linux kernel 2.6.17
> ---------------dmesg-----------------------------------------------------------
> Linux video capture interface: v2.00
> bttv: driver version 0.9.16 loaded
> bttv: snapshot date 2006-07-17
> bttv: using 8 buffers with 2080k (520 pages) each for capture
> bttv: Bt8xx card found (0).
> PCI: Found IRQ 15 for device 0000:00:0a.0
> PCI: Sharing IRQ 15 with 0000:00:0c.0
> PCI: Sharing IRQ 15 with 0000:00:0a.1
> bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 15, latency: 32, mmio: 0xd7401000
> bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 1822:000
> 1
> bttv0: using: Twinhan DST + clones [card=113,insmod option]
> bttv0: gpio: en=00000000, out=00000000 in=00f500fe [init]
> bttv0: using tuner=4
> bttv0: add subdevice "dvb0"
> bt878: AUDIO driver version 0.0.0 loaded
> bt878: Bt878 AUDIO function found (0).
> PCI: Found IRQ 15 for device 0000:00:0a.1
> PCI: Sharing IRQ 15 with 0000:00:0c.0
> PCI: Sharing IRQ 15 with 0000:00:0a.0
> bt878_probe: card id=[0x11822],[ Twinhan VisionPlus DVB ] has DVB functions.
> bt878(0): Bt878 (rev 17) at 00:0a.1, irq: 15, latency: 32, memory: 0xd7402000
> DVB: registering new adapter (bttv0).
> dst(0) dst_comm_init: Initializing DST.
> dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000]
> dst(0) rdc_reset_state: Resetting state machine
> dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000]
> dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002]
> writing [ 00 06 00 00 00 00 00 fa ]
> dst(0) write_dst: _write_dst error (err == -5, len == 0x08, b0 == 0x00)
> dst(0) dst_error_recovery: Trying to return from previous errors.
> dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000]
> dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000]
> dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000]
> dst(0) read_dst: reply is 0xff
> dst(0) dst_wait_dst_ready: dst wait ready after 1
> dst(0) read_dst: reply is 0x6
>  0x1b 0x16 0x3d 0x30 0x33 0x5c 0x39
> dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000]
> dst(0) dst_get_device_id: Checksum failure!
> dst(0) dst_probe: unknown device.
> frontend_init: Could not find a Twinhan DST.
> dvb-bt8xx: A frontend driver was not found for device 109e/0878 subsystem 1822/0001
> ---------------dmesg end-------------------------------------------------------
> 
> This card currently is not supported at all :-(
> 
> P.S. It looks like the problem:
> 
>> Re: [linux-dvb] No frontend for Twinhan VP-1022A Ver 2.0
>> Marius van den Beek
>> Mon, 16 Oct 2006 01:31:59 -0700
> 
Yes, from the logs it seems to be exactly the same thing. Right
now I have given up and bought a skystar2 (again). But I would be 
willing to send the card to someone who could have a closer look on the 
card.
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> 
> 




More information about the linux-dvb mailing list