[linux-dvb] How does my card send diseqc commands ?

Gregoire Favre gregoire.favre at gmail.com
Sun Nov 19 20:20:17 CET 2006


On Sun, Nov 19, 2006 at 06:46:07PM +0000, Andrew de Quincey wrote:

> OK, well the two FF cards have different frontends on them, which is a lead... 
> next, can you tell me which adapter has the DISEQC problem?

Well, with -D0 VDR works pretty well :)
But with -D1 only first sat seems to work, so it's the second card.

If I unload/reload the driver :
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 17
saa7146: found saa7146 @ mem ffffc2000007ce00 (revision 1, irq 17) (0x13c2,0x0000).
DVB: registering new adapter (Technotrend/Hauppauge WinTV DVB-S rev1.X or Fujitsu Siemens DVB-C).
adapter has MAC addr = 00:d0:5c:00:41:90
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f22623
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: adac type set to 0 @ card 0
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
ves1x93: Detected ves1893a rev2
DVB: registering frontend 0 (VLSI VES1x93 DVB-S)...
input: DVB on-card IR receiver as /class/input/input11
dvb-ttpci: found av7110-0.
ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 19
saa7146: found saa7146 @ mem ffffc200002aaa00 (revision 1, irq 19) (0x13c2,0x0000).
DVB: registering new adapter (Technotrend/Hauppauge WinTV DVB-S rev1.X or Fujitsu Siemens DVB-C).
adapter has MAC addr = 00:d0:5c:1f:50:c8
dvb-ttpci: info @ card 1: firm f0240009, rtsl b0250018, vid 71010068, app 80f22623
dvb-ttpci: firmware @ card 1 supports CI link layer interface
dvb-ttpci: adac type set to 0 @ card 1
saa7146_vv: saa7146 (1): registered device video1 [v4l2]
saa7146_vv: saa7146 (1): registered device vbi1 [v4l2]
ves1x93: Detected ves1893a rev2
DVB: registering frontend 1 (VLSI VES1x93 DVB-S)...
dvb-ttpci: found av7110-1.
saa7146: register extension 'budget_ci dvb'.
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 18
saa7146: found saa7146 @ mem ffffc20000440c00 (revision 1, irq 18) (0x13c2,0x100f).
saa7146 (2): dma buffer size 192512
DVB: registering new adapter (TT-Budget/WinTV-NOVA-CI PCI).
adapter has MAC addr = 00:d0:5c:23:a3:9b
input: Budget-CI dvb ir receiver saa7146 (2) as /class/input/input12
DVB: registering frontend 2 (ST STV0299 DVB-S)...

I don't see where it prints the frontend are different ?
-- 
Grégoire FAVRE  http://gregoire.favre.googlepages.com  http://www.gnupg.org



More information about the linux-dvb mailing list