[linux-dvb] Hauppauge HVR 950

Billy Macdonald billymacdonald at gmail.com
Tue Nov 28 08:54:09 CET 2006


Hello,

   Thanks for all the hard work.  I downloaded and made v4l-dvb-kernel
and appear to have loaded the em28xx and em2880-dvb modules properly.

   using xawtv and tvtime I can tune analog channels, but I have had no luck
tuning digital channels with either mythtv .20 or the scan utility.

Attached are the outputs of dmesg and scan.  Any pointers would be
much appreciated.

   This is running on a fresh install of Kubuntu 6.10 downloaded tonight.

Thanks again,
Billy

PS I have the tuner hooked up to an outdoor antenna that gets great
reception on our regular HDTV and tested the tuner on XP and it worked
properly

On 11/25/06, Michael Krufky <mkrufky at linuxtv.org> wrote:
> Markus Rechberger wrote:
> > Hi,
> >
> > On 11/25/06, Michael Krufky <mkrufky at linuxtv.org> wrote:
> >> Billy Macdonald wrote:
> >> > Hi,
> >> >
> >> >  I saw this USB 2.0 HDTV tuner at Circuit City this weekend.  I haven't
> >> > been able to find much information on it in regards to Linux (I use
> >> MythTV)
> >> >
> >> > Anyone know if this works or is expected to work in the near future?  I
> >> > didn't see any mention of it in the mailing list archives, so I
> >> guess it's
> >> > newish.?
> >>
> >> I have it working in a local repository here on my hard drive.  I will
> >> be merging it into Markus' em2880 repositories within the next few days.
> >>
> > Mike,
> >
> > I worked on that tveeprom stuff it wasn't implemented correctly, can
> > you have a look at it too?
> > Also have a look at that TUNER_RESERVED thing please.
>
> Markus-
>
> I have no idea what you're talking about.
>
> I am cleaning up these changes here so that I can send you a patch to apply
> to your tree,
> only changing the minimum of what needs to be changed in order to make this
> device work.
> I have to leave the house soon, but I hope to have this ready tonight.
>
> -Mike
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
-------------- next part --------------
[17179569.184000] Linux version 2.6.17-10-generic (root at vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[17179569.184000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000001f686c00 (usable)
[17179569.184000]  BIOS-e820: 000000001f686c00 - 000000001f688c00 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000001f688c00 - 000000001f68ac00 (ACPI data)
[17179569.184000]  BIOS-e820: 000000001f68ac00 - 0000000020000000 (reserved)
[17179569.184000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
[17179569.184000]  BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 502MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000fe710
[17179569.184000] On node 0 totalpages: 128646
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   Normal zone: 124550 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 DELL                                  ) @ 0x000fec00
[17179569.184000] ACPI: RSDT (v001 DELL    GX280   0x00000007 ASL  0x00000061) @ 0x000fcc05
[17179569.184000] ACPI: FADT (v001 DELL    GX280   0x00000007 ASL  0x00000061) @ 0x000fcc45
[17179569.184000] ACPI: SSDT (v001   DELL    st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffd3808
[17179569.184000] ACPI: MADT (v001 DELL    GX280   0x00000007 ASL  0x00000061) @ 0x000fccb9
[17179569.184000] ACPI: BOOT (v001 DELL    GX280   0x00000007 ASL  0x00000061) @ 0x000fcd2b
[17179569.184000] ACPI: ASF! (v016 DELL    GX280   0x00000007 ASL  0x00000061) @ 0x000fcd53
[17179569.184000] ACPI: MCFG (v001 DELL    GX280   0x00000007 ASL  0x00000061) @ 0x000fcdba
[17179569.184000] ACPI: HPET (v001 DELL    GX280   0x00000007 ASL  0x00000061) @ 0x000fcdf8
[17179569.184000] ACPI: DSDT (v001   DELL    dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:4 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
[17179569.184000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
[17179569.184000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/sda1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[17179569.184000] Console: colour VGA+ 80x25
[17179569.184000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.184000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179569.184000] Memory: 500328k/514584k available (1910k kernel code, 13740k reserved, 1070k data, 308k init, 0k highmem)
[17179569.184000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.184000] hpet0: at MMIO 0xfed00000 (virtual 0xe0000000), IRQs 2, 8, 0
[17179569.184000] hpet0: 3 64-bit timers, 14318180 Hz
[17179569.184000] Using HPET for base-timer
[17179569.184000] Using HPET for gettimeofday
[17179569.184000] Detected 2793.171 MHz processor.
[17179569.184000] Using hpet for high-res timesource
[17179569.268000] Calibrating delay using timer specific routine.. 5591.35 BogoMIPS (lpj=11182705)
[17179569.268000] Security Framework v1.0.0 initialized
[17179569.268000] SELinux:  Disabled at boot.
[17179569.268000] Mount-cache hash table entries: 512
[17179569.268000] CPU: After generic identify, caps: bfebfbff 00100000 00000000 00000000 0000441d 00000000 00000000
[17179569.268000] CPU: After vendor identify, caps: bfebfbff 00100000 00000000 00000000 0000441d 00000000 00000000
[17179569.268000] monitor/mwait feature present.
[17179569.268000] using mwait in idle threads.
[17179569.268000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179569.268000] CPU: L2 cache: 1024K
[17179569.268000] CPU: Hyper-Threading is disabled
[17179569.268000] CPU: After all inits, caps: bfebfbff 00100000 00000000 00000180 0000441d 00000000 00000000
[17179569.268000] Checking 'hlt' instruction... OK.
[17179569.284000] SMP alternatives: switching to UP code
[17179569.284000] Freeing SMP alternatives: 16k freed
[17179569.284000] checking if image is initramfs... it is
[17179569.748000] Freeing initrd memory: 5523k freed
[17179569.748000] ACPI: Core revision 20060707
[17179569.756000] ACPI: Looking for DSDT ... not found!
[17179569.788000] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01
[17179569.788000] Total of 1 processors activated (5591.35 BogoMIPS).
[17179569.788000] ENABLING IO-APIC IRQs
[17179569.788000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179569.936000] Brought up 1 CPUs
[17179569.936000] migration_cost=0
[17179569.936000] NET: Registered protocol family 16
[17179569.936000] EISA bus registered
[17179569.936000] ACPI: bus type pci registered
[17179569.936000] PCI: Using MMCONFIG
[17179569.936000] Setting up standard PCI resources
[17179569.968000] ACPI: Interpreter enabled
[17179569.968000] ACPI: Using IOAPIC for interrupt routing
[17179569.968000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179569.968000] PCI: Probing PCI hardware (bus 00)
[17179569.968000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[17179569.992000] Boot video device is 0000:00:02.0
[17179569.992000] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[17179569.992000] PCI quirk: region 0880-08bf claimed by ICH6 GPIO
[17179569.992000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179569.992000] PCI: Transparent bridge - 0000:00:1e.0
[17179569.992000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.520000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[17179570.528000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[17179570.532000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
[17179570.536000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
[17179570.572000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[17179570.572000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[17179570.572000] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
[17179570.572000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[17179570.572000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[17179570.576000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[17179570.576000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[17179570.576000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[17179570.576000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.576000] pnp: PnP ACPI init
[17179570.616000] pnp: PnP ACPI: found 12 devices
[17179570.616000] PnPBIOS: Disabled by ACPI PNP
[17179570.616000] PCI: Using ACPI for IRQ routing
[17179570.616000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179570.624000] pnp: 00:01: ioport range 0x800-0x85f could not be reserved
[17179570.624000] pnp: 00:01: ioport range 0xc00-0xc7f has been reserved
[17179570.624000] pnp: 00:01: ioport range 0x860-0x8ff could not be reserved
[17179570.624000] pnp: 00:0a: ioport range 0x100-0x1fe has been reserved
[17179570.624000] pnp: 00:0a: ioport range 0x200-0x277 has been reserved
[17179570.624000] pnp: 00:0a: ioport range 0x280-0x2e7 has been reserved
[17179570.624000] pnp: 00:0a: ioport range 0x2f0-0x2f7 has been reserved
[17179570.624000] pnp: 00:0a: ioport range 0x300-0x377 has been reserved
[17179570.624000] pnp: 00:0a: ioport range 0x380-0x3bb has been reserved
[17179570.624000] pnp: 00:0a: ioport range 0x3c0-0x3e7 could not be reserved
[17179570.624000] pnp: 00:0a: ioport range 0x3f6-0x3f7 has been reserved
[17179570.624000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[17179570.624000] PCI: Bridge: 0000:00:01.0
[17179570.624000]   IO window: disabled.
[17179570.624000]   MEM window: dfd00000-dfdfffff
[17179570.624000]   PREFETCH window: disabled.
[17179570.624000] PCI: Bridge: 0000:00:1c.0
[17179570.624000]   IO window: disabled.
[17179570.624000]   MEM window: dfc00000-dfcfffff
[17179570.624000]   PREFETCH window: disabled.
[17179570.624000] PCI: Bridge: 0000:00:1c.1
[17179570.624000]   IO window: disabled.
[17179570.624000]   MEM window: dfb00000-dfbfffff
[17179570.624000]   PREFETCH window: disabled.
[17179570.624000] PCI: Bridge: 0000:00:1e.0
[17179570.624000]   IO window: disabled.
[17179570.624000]   MEM window: disabled.
[17179570.624000]   PREFETCH window: disabled.
[17179570.624000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179570.624000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179570.624000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179570.624000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179570.624000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177
[17179570.624000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179570.624000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179570.624000] NET: Registered protocol family 2
[17179570.664000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179570.664000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[17179570.664000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[17179570.664000] TCP: Hash tables configured (established 16384 bind 8192)
[17179570.664000] TCP reno registered
[17179570.664000] Simple Boot Flag value 0x87 read from CMOS RAM was invalid
[17179570.664000] Simple Boot Flag at 0x7a set to 0x1
[17179570.664000] audit: initializing netlink socket (disabled)
[17179570.664000] audit(1164699594.664:1): initialized
[17179570.664000] VFS: Disk quotas dquot_6.5.1
[17179570.664000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.664000] Initializing Cryptographic API
[17179570.664000] io scheduler noop registered
[17179570.664000] io scheduler anticipatory registered
[17179570.664000] io scheduler deadline registered
[17179570.664000] io scheduler cfq registered (default)
[17179570.664000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179570.664000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179570.664000] assign_interrupt_mode Found MSI capability
[17179570.664000] Allocate Port Service[0000:00:01.0:pcie00]
[17179570.664000] Allocate Port Service[0000:00:01.0:pcie03]
[17179570.664000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179570.664000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179570.664000] assign_interrupt_mode Found MSI capability
[17179570.664000] Allocate Port Service[0000:00:1c.0:pcie00]
[17179570.664000] Allocate Port Service[0000:00:1c.0:pcie02]
[17179570.664000] Allocate Port Service[0000:00:1c.0:pcie03]
[17179570.664000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177
[17179570.664000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179570.664000] assign_interrupt_mode Found MSI capability
[17179570.664000] Allocate Port Service[0000:00:1c.1:pcie00]
[17179570.664000] Allocate Port Service[0000:00:1c.1:pcie03]
[17179570.664000] isapnp: Scanning for PnP cards...
[17179571.020000] isapnp: No Plug & Play device found
[17179571.044000] Real Time Clock Driver v1.12ac
[17179571.044000] hpet_resources: 0xfed00000 is busy
[17179571.044000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179571.044000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.044000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.044000] mice: PS/2 mouse device common for all mice
[17179571.044000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.044000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.044000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.044000] PNP: No PS/2 controller found. Probing ports directly.
[17179571.048000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.048000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.072000] EISA: Probing bus 0 at eisa.0
[17179571.072000] Cannot allocate resource for EISA slot 2
[17179571.072000] Cannot allocate resource for EISA slot 5
[17179571.072000] Cannot allocate resource for EISA slot 6
[17179571.072000] EISA: Detected 0 cards.
[17179571.072000] TCP bic registered
[17179571.072000] NET: Registered protocol family 1
[17179571.072000] NET: Registered protocol family 8
[17179571.072000] NET: Registered protocol family 20
[17179571.072000] Using IPI No-Shortcut mode
[17179571.072000] ACPI: (supports S0 S1 S3 S4 S5)
[17179571.072000] Freeing unused kernel memory: 308k freed
[17179572.252000] Capability LSM initialized
[17179572.284000] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707]
[17179572.284000] ACPI: Getting cpuindex for acpiid 0x2
[17179572.608000] ICH6: IDE controller at PCI slot 0000:00:1f.1
[17179572.608000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169
[17179572.608000] ICH6: chipset revision 3
[17179572.608000] ICH6: not 100% native mode: will probe irqs later
[17179572.608000]     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
[17179572.608000] Probing IDE interface ide0...
[17179573.348000] hda: TSSTcorpCD-R/RW SH-R522C, ATAPI CD/DVD-ROM drive
[17179573.688000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179573.696000] hda: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179573.696000] Uniform CD-ROM driver Revision: 3.20
[17179573.752000] SCSI subsystem initialized
[17179573.752000] libata version 1.20 loaded.
[17179573.756000] ata_piix 0000:00:1f.2: version 1.05
[17179573.756000] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 217
[17179573.756000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179573.756000] ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 217
[17179573.756000] ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 217
[17179573.928000] ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3469 86:3c01 87:4003 88:207f
[17179573.928000] ata1: dev 0 ATA-6, max UDMA/133, 78125000 sectors: LBA48
[17179573.940000] ata1: dev 0 configured for UDMA/133
[17179573.940000] scsi0 : ata_piix
[17179574.096000] ata2: disabling port
[17179574.096000] scsi1 : ata_piix
[17179574.100000]   Vendor: ATA       Model: ST340014AS        Rev: 8.12
[17179574.100000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[17179574.104000] SCSI device sda: 78125000 512-byte hdwr sectors (40000 MB)
[17179574.104000] sda: Write Protect is off
[17179574.104000] sda: Mode Sense: 00 3a 00 00
[17179574.104000] SCSI device sda: drive cache: write back
[17179574.104000] SCSI device sda: 78125000 512-byte hdwr sectors (40000 MB)
[17179574.104000] sda: Write Protect is off
[17179574.104000] sda: Mode Sense: 00 3a 00 00
[17179574.104000] SCSI device sda: drive cache: write back
[17179574.104000]  sda: sda1 sda2 < sda5 >
[17179574.144000] sd 0:0:0:0: Attached scsi disk sda
[17179574.304000] Probing IDE interface ide1...
[17179574.336000] usbcore: registered new driver usbfs
[17179574.336000] usbcore: registered new driver hub
[17179574.336000] USB Universal Host Controller Interface driver v3.0
[17179574.336000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 225
[17179574.336000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179574.336000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179574.336000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179574.336000] uhci_hcd 0000:00:1d.0: irq 225, io base 0x0000ff80
[17179574.336000] usb usb1: configuration #1 chosen from 1 choice
[17179574.336000] hub 1-0:1.0: USB hub found
[17179574.336000] hub 1-0:1.0: 2 ports detected
[17179574.444000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 233
[17179574.444000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179574.444000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179574.444000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[17179574.444000] uhci_hcd 0000:00:1d.1: irq 233, io base 0x0000ff60
[17179574.444000] usb usb2: configuration #1 chosen from 1 choice
[17179574.444000] hub 2-0:1.0: USB hub found
[17179574.444000] hub 2-0:1.0: 2 ports detected
[17179574.552000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 50
[17179574.552000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179574.552000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179574.552000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[17179574.552000] uhci_hcd 0000:00:1d.2: irq 50, io base 0x0000ff40
[17179574.552000] usb usb3: configuration #1 chosen from 1 choice
[17179574.552000] hub 3-0:1.0: USB hub found
[17179574.552000] hub 3-0:1.0: 2 ports detected
[17179574.660000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 58
[17179574.660000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[17179574.660000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[17179574.660000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[17179574.660000] uhci_hcd 0000:00:1d.3: irq 58, io base 0x0000ff20
[17179574.660000] usb usb4: configuration #1 chosen from 1 choice
[17179574.660000] hub 4-0:1.0: USB hub found
[17179574.660000] hub 4-0:1.0: 2 ports detected
[17179574.772000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 225
[17179574.772000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179574.772000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179574.772000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[17179574.772000] ehci_hcd 0000:00:1d.7: debug port 1
[17179574.772000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[17179574.772000] ehci_hcd 0000:00:1d.7: irq 225, io mem 0xffa80800
[17179574.776000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179574.776000] usb usb5: configuration #1 chosen from 1 choice
[17179574.776000] hub 5-0:1.0: USB hub found
[17179574.776000] hub 5-0:1.0: 8 ports detected
[17179574.792000] usb 2-1: new low speed USB device using uhci_hcd and address 2
[17179574.932000] Attempting manual resume
[17179574.948000] kjournald starting.  Commit interval 5 seconds
[17179574.948000] EXT3-fs: mounted filesystem with ordered data mode.
[17179575.728000] usb 5-6: new high speed USB device using ehci_hcd and address 4
[17179575.880000] usb 5-6: configuration #1 chosen from 1 choice
[17179576.120000] usb 2-1: new low speed USB device using uhci_hcd and address 3
[17179576.304000] usb 2-1: configuration #1 chosen from 1 choice
[17179576.564000] usb 2-2: new low speed USB device using uhci_hcd and address 4
[17179576.748000] usb 2-2: configuration #1 chosen from 1 choice
[17179582.872000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179583.060000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179583.300000] Linux agpgart interface v0.101 (c) Dave Jones
[17179583.316000] agpgart: Detected an Intel 915G Chipset.
[17179583.316000] agpgart: Detected 7932K stolen memory.
[17179583.328000] agpgart: AGP aperture is 256M @ 0xc0000000
[17179583.500000] hw_random hardware driver 1.0.0 loaded
[17179583.656000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 23 (level, low) -> IRQ 58
[17179583.656000] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[17179583.688000] parport: PnPBIOS parport detected.
[17179583.688000] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[17179583.712000] input: PC Speaker as /class/input/input0
[17179583.932000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179583.976000] intel8x0_measure_ac97_clock: measured 58251 usecs
[17179583.976000] intel8x0: clocking to 48000
[17179583.980000] tg3.c:v3.59.1 (August 25, 2006)
[17179583.980000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179583.980000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[17179583.988000] Floppy drive(s): fd0 is 1.44M
[17179583.996000] eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:12:3f:4d:37:f1
[17179583.996000] eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
[17179583.996000] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[17179584.008000] FDC 0 is a post-1991 82077
[17179584.056000] usbcore: registered new driver hiddev
[17179584.080000] input: Dell Dell USB Keyboard as /class/input/input1
[17179584.080000] input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1
[17179584.152000] input: Dell Dell USB Mouse as /class/input/input2
[17179584.152000] input: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:1d.1-2
[17179584.152000] usbcore: registered new driver usbhid
[17179584.152000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179584.276000] ts: Compaq touchscreen protocol output
[17179584.344000] Linux video capture interface: v2.00
[17179584.428000] em28xx v4l2 driver version 0.0.1 loaded
[17179584.428000] em28xx new video device (2040:6513): interface 0, class 255
[17179584.428000] em28xx #0: Alternate settings: 8
[17179584.428000] em28xx #0: Alternate setting 0, max size= 0
[17179584.428000] em28xx #0: Alternate setting 1, max size= 0
[17179584.428000] em28xx #0: Alternate setting 2, max size= 1448
[17179584.428000] em28xx #0: Alternate setting 3, max size= 2048
[17179584.428000] em28xx #0: Alternate setting 4, max size= 2304
[17179584.428000] em28xx #0: Alternate setting 5, max size= 2580
[17179584.428000] em28xx #0: Alternate setting 6, max size= 2892
[17179584.428000] em28xx #0: Alternate setting 7, max size= 3072
[17179584.504000] Tuner: registering extension (Xceive 3028 Tuner)
[17179584.852000] attach_inform: eeprom detected.
[17179584.880000] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 13 65 d0 12 5c 03 82 1e 6a 18
[17179584.880000] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00
[17179584.880000] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b 1c 00 00
[17179584.880000] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 01 01 00 00 00 00
[17179584.880000] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[17179584.880000] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[17179584.880000] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00
[17179584.880000] em28xx #0: i2c eeprom 70: 32 00 37 00 36 00 31 00 39 00 32 00 32 00 36 00
[17179584.880000] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00
[17179584.880000] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 38 00 30 00 00 00
[17179584.880000] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 b1 fe d0 18 85
[17179584.880000] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 9a 97
[17179584.880000] em28xx #0: i2c eeprom c0: 10 f0 74 02 01 00 01 79 65 00 00 00 00 00 00 00
[17179584.880000] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 b1 fe d0 18 85
[17179584.880000] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 9a 97
[17179584.880000] em28xx #0: i2c eeprom f0: 10 f0 74 02 01 00 01 79 65 00 00 00 00 00 00 00
[17179584.880000] EEPROM ID= 0x9567eb1a
[17179584.880000] Vendor/Product ID= 2040:6513
[17179584.880000] AC97 audio (5 sample rates)
[17179584.880000] 500mA max power
[17179584.880000] Table at 0x24, strings=0x1e82, 0x186a, 0x0000
[17179584.880000] tveeprom 0-0050: Hauppauge model 65201, rev A1C0, serial# 1087386
[17179584.880000] tveeprom 0-0050: tuner model is Xceive XC3028 (idx 120, type 71)
[17179584.880000] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4)
[17179584.880000] tveeprom 0-0050: audio processor is None (idx 0)
[17179584.880000] tveeprom 0-0050: has radio
[17179584.880000] tuner 0-0061: chip found @ 0xc2 (em28xx #0)
[17179584.880000] attach inform (default): detected I2C address c2
[17179584.888000] Tuner: setting up tuner core extension for: Xceive 3028 Tuner
[17179584.888000] Loading base firmware: xc3028_init0.i2c.fw
[17179585.284000] NET: Registered protocol family 17
[17179585.848000] Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw
[17179585.884000] attach_inform: tvp5150 detected.
[17179585.964000] tvp5150 0-005c: tvp5150am1 detected.
[17179586.056000] em28xx-video.c: requesting em28xx-audio!
[17179586.056000] em28xx-video.c: requesting em2880-dvb!
[17179586.064000] em28xx #0: V4L2 device registered as /dev/video0
[17179586.064000] em28xx #0: Found Hauppauge WinTV HVR 950
[17179586.064000] usbcore: registered new driver em28xx
[17179586.152000] tg3: eth0: Link is up at 100 Mbps, full duplex.
[17179586.152000] tg3: eth0: Flow control is off for TX and off for RX.
[17179586.156000] lp0: using parport0 (interrupt-driven).
[17179586.180000] Adding 1477940k swap on /dev/disk/by-uuid/9e45355e-720f-4007-af9f-1151946f8df3.  Priority:-1 extents:1 across:1477940k
[17179586.252000] EXT3 FS on sda1, internal journal
[17179589.208000] NET: Registered protocol family 10
[17179589.208000] lo: Disabled Privacy Extensions
[17179589.208000] IPv6 over IPv4 tunneling driver
[17179591.752000] ACPI: Power Button (FF) [PWRF]
[17179591.752000] ACPI: Power Button (CM) [VBTN]
[17179591.900000] ibm_acpi: ec object not found
[17179591.928000] pcc_acpi: loading...
[17179593.540000] [drm] Initialized drm 1.0.1 20051102
[17179593.544000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179593.544000] [drm] Initialized i915 1.5.0 20060119 on minor 0
[17179594.440000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179594.440000] apm: overridden by ACPI.
[17179600.072000] eth0: no IPv6 routers present
[17179602.776000] Bluetooth: Core ver 2.8
[17179602.776000] NET: Registered protocol family 31
[17179602.776000] Bluetooth: HCI device and connection manager initialized
[17179602.776000] Bluetooth: HCI socket layer initialized
[17179602.792000] Bluetooth: L2CAP ver 2.8
[17179602.792000] Bluetooth: L2CAP socket layer initialized
[17179602.864000] Bluetooth: RFCOMM socket layer initialized
[17179602.864000] Bluetooth: RFCOMM TTY layer initialized
[17179602.864000] Bluetooth: RFCOMM ver 1.7
[17179603.464000] xc3028_set_std, Loading specific configuration for requested mode xc3028_MN_NTSCPAL_A2.i2c.fw
[17179660.636000] Tuner: registering extension (MT2060 Silicon Tuner)
[17179660.644000] em2880-dvb.c: DVB Init
[17179660.644000] em2880-dvb.c: VIDIOC_S_MODE
[17179660.644000] Loading base firmware: xc3028_8MHz_init0.i2c.fw
[17179661.736000] Loading specific dtv settings: xc3028_DTV6_ATSC_2620.i2c.fw
[17179661.756000] xc3028-tuner.c: sending extra call for DVB-T
[17179661.860000] DVB: registering new adapter (em2880 DVB-T).
[17179661.864000] DVB: registering frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)...
[17179661.864000] Em28xx: Initialized (Em2880 DVB Extension) extension
[17179663.324000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179670.576000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179677.832000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179685.088000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179692.344000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179699.600000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179706.856000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179714.112000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179721.368000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179728.624000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179735.880000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179743.136000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179750.392000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179757.648000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179764.904000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179772.160000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179779.416000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179786.672000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179793.928000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179801.180000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179808.432000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179815.684000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179822.936000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179830.188000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179837.440000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179844.692000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179851.944000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179859.196000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179866.448000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179873.700000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179880.952000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179888.204000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179895.456000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179902.708000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179909.960000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179917.212000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179924.464000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179931.716000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179938.968000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179946.220000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179953.476000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179960.732000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179967.988000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179975.244000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179982.500000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179989.756000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17179997.012000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17180004.268000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17180011.524000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17180018.780000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17180026.036000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17180033.292000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17180040.548000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17180047.804000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17180055.060000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17180062.316000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17180069.572000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17180076.828000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17180084.084000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17180091.340000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17180098.596000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17180105.852000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17180113.108000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17180120.364000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17180127.620000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17180134.872000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17180142.124000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
[17180149.376000] xc3028-tuner.c: sorry [7] bandwidth isn't supported (please report)
-------------- next part --------------
mythtv at myth04:~/dvb-apps$ cd util/scan/
mythtv at myth04:~/dvb-apps/util/scan$ ./scan atsc/us-NTSC-center-frequencies-8VSB
scanning atsc/us-NTSC-center-frequencies-8VSB
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
main:2263: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such file or directory
mythtv at myth04:~/dvb-apps/util/scan$ sudo modprobe em2880-dvb
Password:
Sorry, try again.
Password:
mythtv at myth04:~/dvb-apps/util/scan$ ./scan atsc/us-NTSC-center-frequencies-8VSB
scanning atsc/us-NTSC-center-frequencies-8VSB
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>>> tune to: 57000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 63000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 69000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 79000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 85000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 177000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 183000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 189000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 195000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 201000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 207000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 213000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 473000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 479000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 485000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 491000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 497000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 503000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 509000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 515000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 521000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 527000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 533000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 539000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 545000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 551000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 557000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 563000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 569000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 575000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 581000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 587000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 593000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 599000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 605000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 611000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 617000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 623000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 629000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 635000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 641000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 647000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 653000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 659000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 665000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 671000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 677000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 683000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 689000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 695000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 701000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 707000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 713000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 719000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 725000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 731000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 737000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 743000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 749000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 755000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 761000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 767000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 773000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 779000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 785000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 791000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 797000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
>>> tune to: 803000000:8VSB
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x1ffb
dumping lists (0 services)
Done.
mythtv at myth04:~/dvb-apps/util/scan$


More information about the linux-dvb mailing list