[linux-dvb] Pinnacle 310i DVB-T, please try this patch
kevinlux at karondimonio.it
Fri Oct 6 19:23:40 CEST 2006
Hartmut Hackmann ha scritto:
> Hi, all
> First: thanks for testing.
> To sum up:
> Things seem to work, right?
> Just some comments:
> - It should not be necessary to set card and tuner type manually.
> - If no dvb devices are created, the reason most probably is that
> the saa7134-dvb module is not loaded. This still needs to be done
> - This card needs the external firmware.
> - If you don't have an internal sound cable, you will need to load
> the saa7134-oss or the saa7134-alsa module and route the sound
> in user space as described in the wiki. This does *not* hold for
> - The digital sound processing uses a sample rate of 32kHz, that's
> - The card might have a sensitivity issue. The reason is that there
> is an external RF amplifier on the board which is not handled by
> the driver yet.
> Can i check the patch in?
> Best regards
> linux-dvb mailing list
> linux-dvb at linuxtv.org
Yes, for me it's all okay!
But i think is better include support for Remote.
In analog mode, kernel dump show input from remote, but in dvb mode no.
I think that if is possible it's better include code part that manage
remote from saa7134 also
More information about the linux-dvb