[linux-dvb] No frontend for Twinhan VP-1022A Ver 2.0

Marius van den Beek mvdbeek at gmx.de
Sat Oct 14 12:26:01 CEST 2006


Hello

I have been trying to get my Twinhan Card VP-1022A to work with
the dvb-drivers of kernel 2.6.18 and/or the latest hg-snapshot.
>From what I read I thought the cad was supported, but when I load
the modules I get a a directory  /dev/dvb/adapter0 wit demux0 dvr0 and net0,
but frontend0 seems to be missing. The dmesg output with bttv cardis
card with=113 and verbose=4 is as follows:

Linux video capture interface: v2.00
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Host bridge needs ETBF enabled.
bttv: Bt8xx card found (0).
PCI: setting IRQ 10 as level-triggered
PCI: Found IRQ 10 for device 0000:00:0f.0
PCI: Sharing IRQ 10 with 0000:00:0f.1
bttv0: Bt878 (rev 17) at 0000:00:0f.0, irq: 10, latency: 128, mmio:
0xde001000
bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is
1822:0001
bttv0: using: Twinhan DST + clones [card=113,insmod option]
bttv0: enabling ETBF (430FX/VP3 compatibilty)
bttv0: gpio: en=00000000, out=00000000 in=00f500ff [init]
bttv0: using tuner=4
bttv0: add subdevice "dvb0"
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
PCI: Found IRQ 10 for device 0000:00:0f.1
PCI: Sharing IRQ 10 with 0000:00:0f.0
bt878_probe: card id=[0x11822],[ Twinhan VisionPlus DVB ] has DVB functions.
bt878(0): Bt878 (rev 17) at 00:0f.1, irq: 10, latency: 128, memory:
0xde002000
DVB: registering new adapter (bttv0).
dst(0) dst_comm_init: Initializing DST.
dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000]
dst(0) rdc_reset_state: Resetting state machine
dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000]
dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002]
writing [ 00 06 00 00 00 00 00 fa ]
dst(0) write_dst: _write_dst error (err == -5, len == 0x08, b0 == 0x00)
dst(0) dst_error_recovery: Trying to return from previous errors.
dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000]
dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000]
dst(0) write_dst: _write_dst error (err == -5, len == 0x08, b0 == 0x00)
dst(0) dst_error_recovery: Trying to return from previous errors.
dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000]
dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000]
dst(0) write_dst: RDC 8820 RESET
dst(0) dst_error_bailout: Trying to bailout from previous error.
dst(0) rdc_8820_reset: Resetting DST
dst(0) dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000]
dst(0) dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004]
dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000]
dst(0) dst_probe: unknown device.
frontend_init: Could not find a Twinhan DST.
dvb-bt8xx: A frontend driver was not found for device 109e/0878
subsystem 1822/0001

And this is lspci -vv:
00:0f.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (
rev 11)
        Subsystem: Twinhan Technology Co. Ltd VisionPlus DVB card
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Step
ping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort- >SERR- <PERR-
        Latency: 128 (4000ns min, 10000ns max)
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at de001000 (32-bit, prefetchable) [size=4K]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot
-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0f.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
(rev 11
)
        Subsystem: Twinhan Technology Co. Ltd VisionPlus DVB Card
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Step
ping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort- >SERR- <PERR-
        Latency: 128 (1000ns min, 63750ns max)
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at de002000 (32-bit, prefetchable) [size=4K]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot
-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

I am running gentoo on a pentium3 system.
I hope someone can help me solve this problem.




More information about the linux-dvb mailing list