[linux-dvb] Re: Problem: dib7000m don't know my vendor

Christian Timmer christian.timmer at gmail.com
Wed Oct 18 11:36:00 CEST 2006


Am Mittwoch, den 18.10.2006, 09:39 +0200 schrieb Patrick Boettcher:
> Hi,
> 
> On Tue, 17 Oct 2006, Christian Timmer wrote:
> > Am Dienstag, den 17.10.2006, 14:54 +0200 schrieb Patrick Boettcher:
> > > Hi,
> > > 
> > > in my repository (http://linuxtv.org/hg/~pb/v4l-dvb) I just committed a
> > > first working version of the dib7000m/p-driver along with some
> > > modifications in the dib0700-driver.
> > > 
> > > I tested with a first generation Nova-T stick - it works (AverMedia is
> > > identical). There is a chance that someone has the newer version of those
> > > devices - it contains a different version of the DiB7000 - I will try to
> > > release this one as soon as possible.
> > > 
> > > Please load the dib7000m-driver with debug=1 in case it does not work and 
> > > reply to this Email but change the subject (like: "Problem (was: DiB7000M 
> > > ...") - success reports (Yes I want them as well) can be replied without 
> > > changing the subject.
> > > 
> > > good luck,
> > > Patrick.
> > Hi,
> > 
> > I've just checked out Patrick's repository and give the (new)
> > dib7000m-driver a first try. Kernel is 2.6.17-686 (ubuntu edgy). The
> > dvb-adapter is a hauppauge wintv nova t usb2. This is what lsusb says: 
> > 
> > Bus 004 Device 003: ID 2040:7050 Hauppauge
> > 
> > And now the syslog:
> > 
> > [17179761.140000] usb 4-2: new high speed USB device using ehci_hcd and
> > address 3
> > [17179761.272000] usb 4-2: configuration #1 chosen from 1 choice
> > [17179761.504000] dib0700: loaded with support for 2 different
> > device-types
> > [17179761.504000] dvb-usb: found a 'Hauppauge Nova-T Stick' in cold
> > state, will try to load a firmware
> > [17179761.512000] dvb-usb: downloading firmware from file
> > 'dvb-usb-dib0700-01.fw'
> > [17179761.696000] dib0700: firmware started successfully.
> > [17179761.800000] dvb-usb: found a 'Hauppauge Nova-T Stick' in warm
> > state.
> > [17179761.800000] dvb-usb: will pass the complete MPEG2 transport stream
> > to the software demuxer.
> > [17179761.800000] DVB: registering new adapter (Hauppauge Nova-T Stick).
> > [17179761.864000] DiB7000M:-E-  DiB7000M: wrong Vendor ID (read=0x0)
> > [17179761.864000] dvb-usb: no frontend was attached by 'Hauppauge Nova-T
> > Stick'
> > [17179761.864000] dvb-usb: Hauppauge Nova-T Stick successfully
> > initialized and connected.
> > [17179761.864000] usbcore: registered new driver dvb_usb_dib0700
> 
> Can you simply try to replug the device two or three times?
> 
> Patrick.

Hi,

I just replugged the device approximately six or seven times with small
differences to the prior posted syslog.

[17181017.824000] usb 4-2: new high speed USB device using ehci_hcd and
address 9
[17181017.956000] usb 4-2: configuration #1 chosen from 1 choice
[17181017.956000] dvb-usb: found a 'Hauppauge Nova-T Stick' in cold
state, will try to load a firmware
[17181017.992000] dvb-usb: downloading firmware from file
'dvb-usb-dib0700-01.fw'
[17181018.168000] dib0700: firmware started successfully.
[17181018.272000] dvb-usb: found a 'Hauppauge Nova-T Stick' in warm
state.
[17181018.272000] dvb-usb: will pass the complete MPEG2 transport stream
to the software demuxer.
[17181018.272000] DVB: registering new adapter (Hauppauge Nova-T Stick).
[17181018.336000] DiB7000M:-E-  DiB7000M: wrong Vendor ID (read=0x0)
[17181018.336000] dvb-usb: no frontend was attached by 'Hauppauge Nova-T
Stick'
[17181018.336000] dvb-usb: Hauppauge Nova-T Stick successfully
initialized and connected.

This row is missing: 
dib0700: loaded with support for 2 different device-types

and the last one is new:
dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.


Christian




More information about the linux-dvb mailing list