[linux-dvb] HVR 1110 works with 2.6.17.13, v4l-dvb and modprobe -v saa3174 card=101 && modprobe -v saa3174_dvb

tomlohave tomlohave tomlohave at gmail.com
Wed Oct 25 11:59:16 CEST 2006


2006/10/25, Calum <caluml at gmail.com>:
>
> Hello all
>
> I have managed to get the HVR1110 working, with help from people on
> #v4l, as well as a nice chap called John via email.
>
> He said that it worked with the saa3174 driver.
>
>
> I have it working in DVB-T (haven't tried analogue though) with the
> following:
>
> kernel:         2.6.17.13 (with dvb/v4l stuff compiled as modules)
> v4l-dvb:        Latest (as of 2006-10-24)
>
> modprobe -v saa3174 card=101
> modprobe -v saa3174_dvb


yes but with this settings, no remote control and no analogic tv (when you
enabled tuner with debug=1, no lock).
So i wrote a small definition for this card (based on 310i) and i search for
more informations to get remote controle and analogic tv work.
i have not tested input via s-video neither the radio device.

dmesg for me shows:
>
> # dmesg | grep saa71
> saa7130/34: v4l2 driver version 0.2.14 loaded
> saa7133[0]: found at 0000:00:06.0, rev: 209, irq: 20, latency: 32,
> mmio: 0xcefee800
> saa7133[0]: subsystem: 0070:6701, board: Pinnacle PCTV 310i
> [card=101,insmod option]
> saa7133[0]: board init: gpio is 6400000
> saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
> saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
> saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> saa7133[0]: i2c scan: found device @ 0x10  [???]
> saa7133[0]: i2c scan: found device @ 0x96  [???]
> saa7133[0]: i2c scan: found device @ 0xa0  [eeprom]
> saa7133[0]: i2c scan: found device @ 0xe0  [???]
> saa7133[0]: i2c scan: found device @ 0xe2  [???]
> saa7133[0]: i2c scan: found device @ 0xe4  [???]
> saa7133[0]: i2c scan: found device @ 0xe6  [???]
> tuner 0-004b: chip found @ 0x96 (saa7133[0])
> saa7133[0]: registered device video0 [v4l2]
> saa7133[0]: registered device vbi0
> saa7133[0]: registered device radio0
> DVB: registering new adapter (saa7133[0]).
>
> And from there, you can use dvbscan/mplayer as normal.
>
> Calum


PS : Sorry for my bad english.

Tom

--
> bash# Got root? Get root. Fast IPv4+6 Linux VPS
> http://linuxvps.org/
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20061025/0aa1947f/attachment-0001.htm


More information about the linux-dvb mailing list