[linux-dvb] Tuning problems with Lifeview FlyDVB-T LR301

Nico Sabbi nicola_sabbi at fastwebnet.it
Fri Sep 1 22:03:16 CEST 2006


Adam Charrett wrote:

> Hi,
>
> I am having problems getting my FlyDVB-T to lock onto QAM64 signals. 
> It will occasionally lock onto the multiplex using tzap, but if I then 
> quit tzap and try again it won't lock, ever. I'm not having this 
> problem with QAM16 signals and it doesn't appear to be a problem under 
> Windows (dual boot machine), which makes me suspect the LinuxDVB drivers.
> I am using version 7a0daff8ed2c.
>
> The following is the dump of the kernel messages when the dvb driver 
> is loaded:
>
> Linux video capture interface: v2.00
> saa7130/34: v4l2 driver version 0.2.14 loaded
> ACPI: PCI Interrupt 0000:04:0a.0[A] -> Link [LNKC] -> GSI 18 (level, 
> low) -> IRQ 58
> saa7134[0]: found at 0000:04:0a.0, rev: 1, irq: 58, latency: 32, mmio: 
> 0xfeafdc00
> saa7134[0]: subsystem: 5168:0301, board: LifeView FlyDVB-T / Genius 
> VideoWonder DVB-T [card=86,autodetected]
> saa7134[0]: board init: gpio is 10000
> input: saa7134 IR (LifeView FlyDVB-T / as /class/input/input9
> saa7134[0]: i2c eeprom 00: 68 51 01 03 54 20 1c 00 43 43 a9 1c 55 d2 
> b2 92
> saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff 
> ff ff
> saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 01 03 08 ff 01 08 ff ff 
> ff ff
> saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
> ff ff
> saa7134[0]: i2c eeprom 40: ff 1b 00 c0 ff 10 01 01 ff ff ff ff ff ff 
> ff ff
> saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
> ff ff
> saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
> ff ff
> saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
> ff ff
> saa7134[0]: registered device video0 [v4l2]
> saa7134[0]: registered device vbi0
> DVB: registering new adapter (saa7134[0]).
> DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
>
> Any help would be much appreicated as I have 2 of these cards in 2 
> different  machines and they both show this problem.


try to set all tuning parameters except frequency and bandwidth to AUTO



More information about the linux-dvb mailing list