[linux-dvb] WinTV NOVA-T 500

Patrick Boettcher patrick.boettcher at desy.de
Tue Sep 12 19:26:13 CEST 2006


Hi,

I just debugged a little for the Nova-T 500. I found some things, but not 
all. All I know, the repository dib0700 cannot work and I have no quick 
fix.

So all I can ask for is some patience.

Patrick.

On Tue, 12 Sep 2006, Jose Alberto Reguero wrote:

> El Martes, 12 de Septiembre de 2006 14:36, escribió:
> > Attached the firmware.
> >
> > Please report success or not to the list.
> >
> > Patrick.
> >
> 
> Relevant parts of dmesg:
> 
> dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to 
> load a firmware
> dvb-usb: downloading firmware from file 'dvb-usb-dib0700-01.fw'
> dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state.
> dvb-usb: will pass the complete MPEG2 transport stream to the software 
> demuxer.
> DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T).
> DVB: registering frontend 0 (DiBcom 3000MC/P)...
> MT2060: successfully identified (IF1 = 1220)
> dvb-usb: will pass the complete MPEG2 transport stream to the software 
> demuxer.
> DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T).
> DVB: registering frontend 1 (DiBcom 3000MC/P)...
> MT2060: successfully identified (IF1 = 1220)
> dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and 
> connected.
> usbcore: registered new driver dvb_usb_dib0700
> 
> But not good rsults with tzap:
> 
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> reading channels from file '/root/.tzap/channels.conf'
> tuning to 770000000 Hz
> video pid 0x0065, audio pid 0x0067
> status 00 | signal ffff | snr 0000 | ber 001fffff | unc 00001125 |
> status 00 | signal ffff | snr 0000 | ber 001fffff | unc 00000000 |
> status 00 | signal ffff | snr 0000 | ber 001fffff | unc 00000000 |
> status 00 | signal ffff | snr 0000 | ber 001fffff | unc 00000000 |
> 
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> reading channels from file '/root/.tzap/channels.conf'
> tuning to 850000000 Hz
> video pid 0x05dd, audio pid 0x05de
> status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000000 |
> status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000019 |
> status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000000 |
> status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000000 |
> status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000000 |
> 
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> reading channels from file '/root/.tzap/channels.conf'
> tuning to 858000000 Hz
> video pid 0x012d, audio pid 0x012f
> status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000000 |
> status 1a | signal 0000 | snr 0000 | ber 001fffff | unc 000000c9 | FE_HAS_LOCK
> status 1a | signal 0000 | snr 0000 | ber 001fffff | unc 00000cff | FE_HAS_LOCK
> status 1a | signal 0000 | snr 0000 | ber 001fffff | unc 00001ff5 | FE_HAS_LOCK
> status 1a | signal 0000 | snr 0000 | ber 001fffff | unc 00001ff5 | FE_HAS_LOCK
> 
> Thanks.
> Jose Alberto
> 


More information about the linux-dvb mailing list