[linux-dvb] TDA10086 (TT S-1401) DiSEqC problem

Yuri Elizarov yme at fromru.com
Mon Sep 18 11:29:10 CEST 2006


Good day to Everyone.

I have a problem with the TT S-1401 card. It seems, it cannot talk to diseqc
switch correctly under Linux. I am sure the problem is local to Linux code, for
i have it working in XP.

I have the card connected to LNB0: Eutelsat-21.5E and LNB1:Hotbird. 
Scanning of LNB0:
# scan -s 0 Eutelsat-21.5E
is successful.

When I try to scan Hotbird, i get
# scan -s 1 Hotburd-13.0E 
scanning Hotburd-13.0E
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 12597000 V 27500000 3
>>> tune to: 12597:v:1:27500
WARNING: >>> tuning failed!!!
>>> tune to: 12597:v:1:27500 (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.

I am sure that the signal from HB is OK, because i tried to scan it while
connected directly (w/o diseqc), and it was all right.

I have Mercurial drivers 15d2ed3a6af2 installed. 

My dmesg:
PCI: Enabling device 0000:00:0b.0 (0004 -> 0006)
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 169
saa7146: found saa7146 @ mem f8884000 (revision 1, irq 169) (0x13c2,0x1018).
saa7146 (0): dma buffer size 192512
DVB: registering new adapter (TT-Budget-S-1401 PCI).
adapter has MAC addr = XX:XX:XX:XX:XX:XX
DVB: registering frontend 0 (Philips TDA10086 DVB-S)...

lsmod on this subject:
tda826x                 3332  1 
tda10086                8388  1 
budget                 11264  0 
budget_core            10116  1 budget
saa7146                16392  2 budget,budget_core
ttpci_eeprom            2176  1 budget_core
dvb_core               71400  2 budget,budget_core
i2c_core               19536  13 lirc_i2c,eeprom,asb100,
				i2c_viapro,lnbp21,tda826x,tda10086,
				tuner,budget,budget_core,ttpci_eeprom,
				saa7134,ir_kbd_i2c

Can somebody help? Appreciate any suggestions.

Regards,
Yuri.



More information about the linux-dvb mailing list