[linux-dvb] Hauppauge WinTV NOVA T USB2 not working any more

Mario Rossi mariofutire at googlemail.com
Tue Sep 19 20:15:01 CEST 2006


Hi,

After todays changes in the Dib3000 code my Hauppauge Win TV NOVA T
USB2 is not working any more.
I'm using Fedora Core 5, kernel from source 2.6.17.13 and latest mercurial.

This is the output

Sep 19 19:06:47 thinkpad kernel: usb 4-4: new high speed USB device
using ehci_hcd and address 3
Sep 19 19:06:47 thinkpad kernel: usb 4-4: configuration #1 chosen from 1 choice
Sep 19 19:06:47 thinkpad kernel: dvb-usb: found a 'Hauppauge
WinTV-NOVA-T usb2' in cold state, will try to load a firmware
Sep 19 19:06:47 thinkpad kernel: dvb-usb: downloading firmware from
file 'dvb-usb-nova-t-usb2-02.fw'
Sep 19 19:06:47 thinkpad kernel: usbcore: registered new driver
dvb_usb_nova_t_usb2
Sep 19 19:06:48 thinkpad kernel: usb 4-4: USB disconnect, address 3
Sep 19 19:06:48 thinkpad kernel: dvb-usb: generic DVB-USB module
successfully deinitialized and disconnected.
Sep 19 19:06:49 thinkpad kernel: usb 4-4: new high speed USB device
using ehci_hcd and address 4
Sep 19 19:06:50 thinkpad kernel: usb 4-4: configuration #1 chosen from 1 choice
Sep 19 19:06:50 thinkpad kernel: dvb-usb: found a 'Hauppauge
WinTV-NOVA-T usb2' in warm state.
Sep 19 19:06:50 thinkpad kernel: dvb-usb: will pass the complete MPEG2
transport stream to the software demuxer.
Sep 19 19:06:50 thinkpad kernel: DVB: registering new adapter
(Hauppauge WinTV-NOVA-T usb2).
Sep 19 19:06:50 thinkpad kernel: dvb-usb: MAC address: 00:0d:fe:04:8b:40
Sep 19 19:06:50 thinkpad kernel: dvb-usb: no frontend was attached by
'Hauppauge WinTV-NOVA-T usb2'
Sep 19 19:06:50 thinkpad kernel: input: IR-receiver inside an USB DVB
receiver as /class/input/input4
Sep 19 19:06:50 thinkpad kernel: dvb-usb: schedule remote query
interval to 100 msecs.
Sep 19 19:06:50 thinkpad kernel: dvb-usb: Hauppauge WinTV-NOVA-T usb2
successfully initialized and connected.

As you can read the problem is the fronted which is not attached, and
in fact no frontend is present under /dev/dvb/adapter0

crw------- 1 andrea root 212, 4 Sep 19 19:06 demux0
crw------- 1 andrea root 212, 5 Sep 19 19:06 dvr0
crw------- 1 andrea root 212, 7 Sep 19 19:06 net0

scan returns this error

[andrea at thinkpad ~]$ scan /opt/dvb/uk-CrystalPalace
scanning /opt/dvb/uk-CrystalPalace
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
main:2251: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No
such file or directory

Is there some new options I'm supposed to pass to the module?

Those are the (relevant) loaded modules

dvb_usb_nova_t_usb2     6020  0
dvb_usb_dibusb_common     9604  1 dvb_usb_nova_t_usb2
dib3000mc              11780  2 dvb_usb_dibusb_common
dibx000_common          3844  1 dib3000mc
dvb_usb                21900  2 dvb_usb_nova_t_usb2,dvb_usb_dibusb_common
dvb_core               69800  1 dvb_usb
dvb_pll                14212  2 dvb_usb_dibusb_common,dvb_usb
radeon                 98848  1
drm                    61076  2 radeon
i2c_dev                 8324  0
i2c_core               19472  5 dib3000mc,dibx000_common,dvb_usb,dvb_pll,i2c_dev

any ideas?



More information about the linux-dvb mailing list