[linux-dvb] FusionHDTV DVB-T Dual Digital2

Mark McKenzie mark at bastardcard.net
Fri Sep 29 00:24:29 CEST 2006


I tried the new version of the driver last night with some success

The driver loads with the following messages in dmesg:

Sep 29 08:13:04 kulfi kernel: [   16.216298] dvb-usb: found a 'DViCO
FusionHDTV DVB-T Dual Digital 2' in cold state, will try to load a firmware
Sep 29 08:13:04 kulfi kernel: [   16.305374] dvb-usb: downloading firmware
from file 'dvb-usb-bluebird-01.fw'
Sep 29 08:13:04 kulfi kernel: [   16.367611] dvb-usb: found a 'DViCO
FusionHDTV DVB-T Dual Digital 2' in cold state, will try to load a firmware
Sep 29 08:13:04 kulfi kernel: [   16.369592] dvb-usb: downloading firmware
from file 'dvb-usb-bluebird-01.fw'
Sep 29 08:13:04 kulfi kernel: [   16.431272] usbcore: registered new driver
dvb_usb_cxusb
Sep 29 08:13:04 kulfi kernel: [   16.564442] usb 7-1: USB disconnect,
address 2
Sep 29 08:13:04 kulfi kernel: [   16.564545] dvb-usb: generic DVB-USB module
successfully deinitialized and disconnected.
Sep 29 08:13:04 kulfi kernel: [   16.669246] usb 7-2: USB disconnect,
address 3
Sep 29 08:13:04 kulfi kernel: [   16.669343] dvb-usb: generic DVB-USB module
successfully deinitialized and disconnected.
Sep 29 08:13:04 kulfi kernel: [   18.267412] usb 7-1: new high speed USB
device using ehci_hcd and address 4
Sep 29 08:13:04 kulfi kernel: [   18.384471] usb 7-1: configuration #1
chosen from 1 choice
Sep 29 08:13:04 kulfi kernel: [   18.384779] dvb-usb: found a 'DViCO
FusionHDTV DVB-T Dual Digital 2' in warm state.
Sep 29 08:13:04 kulfi kernel: [   18.384900] dvb-usb: will pass the complete
MPEG2 transport stream to the software demuxer.
Sep 29 08:13:04 kulfi kernel: [   18.395525] DVB: registering new adapter
(DViCO FusionHDTV DVB-T Dual Digital 2).
Sep 29 08:13:04 kulfi kernel: [   18.731996] DVB: registering frontend 0
(Zarlink ZL10353 DVB-T)...
Sep 29 08:13:04 kulfi kernel: [   18.732535] input: IR-receiver inside an
USB DVB receiver as /class/input/input3
Sep 29 08:13:04 kulfi kernel: [   18.732624] dvb-usb: schedule remote query
interval to 150 msecs.
Sep 29 08:13:04 kulfi kernel: [   18.732680] dvb-usb: DViCO FusionHDTV DVB-T
Dual Digital 2 successfully initialized and connected.

Then I ran scan with the example file for my city:

root at kulfi:/var/log# scan
/usr/share/doc/dvb-utils/examples/scan/dvb-t/au-canberra
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/au-canberra
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 205625000 1 3 3 3 1 1 0
initial transponder 177500000 1 2 0 3 1 2 0
initial transponder 191625000 1 3 0 3 1 1 0
initial transponder 219500000 1 3 1 3 1 1 0
initial transponder 543500000 1 2 0 3 1 2 0
>>> tune to:
205625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
205625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
177500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
0x0807 0x0807: pmt_pid 0x0160 Southern Cross Television -- SC10 Canberra
(running)
0x0807 0x0827: pmt_pid 0x06ae Southern Cross Television -- SC10 HD (running)
Network Name 'Southern Cross Television     '
>>> tune to:
191625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
191625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
219500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
Network Name 'WIN Digital'
0x327a 0x0001: pmt_pid 0x0020 WIN Digital -- WIN TV Canberra (running)
0x327a 0x000a: pmt_pid 0x00b0 WIN Digital -- WIN TV HD (running)
>>> tune to:
543500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
0x0350 0x0350: pmt_pid 0x0400 SBS -- SBS HD (running)
0x0350 0x0351: pmt_pid 0x0401 SBS -- SBS DIGITAL 1 (running)
0x0350 0x0352: pmt_pid 0x0402 SBS -- SBS DIGITAL 2 (running)
0x0350 0x0353: pmt_pid 0x0408 SBS -- SBS EPG (running)
0x0350 0x035e: pmt_pid 0x0403 SBS -- SBS RADIO 1 (running)
0x0350 0x035f: pmt_pid 0x0404 SBS -- SBS RADIO 2 (running)
Network Name 'SBS NETWORK'
>>> tune to:
571500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
571500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
(tuning failed)

and at that point the machine had locked up hard.

I also noticed that on some occasions it would lock up on the first channel
it found as well.

Mark

Michael Krufky <mkrufky at linuxtv.org> wrote: 
>Michael Krufky wrote:
>> Michael Krufky wrote:
>>> I have written to my contact at DViCO with some questions about this
>>> device.  While we're waiting for his response, please try the
>suggestion
>>> above.  Please keep in mind that you will need to have the bluebird
>>> firmware present in order for this test to work.
>> 
>> I've received confirmation from DViCO that the usb components on the
>> DViCO FusionHDTV DVB-T Dual Digital 2 are identical to the usb component
>> on the DViCO FusionHDTV DVB-T Dual Digital 1.
>> 
>> The attached patch, applied against v4l-dvb master repository, adds
>> support for your device.  Please test this and let me know how it goes.
>> 
>> ...or you can just clone the tree located at:
>> 
>> http://linuxtv.org/hg/~mkrufky/cxusb
>
>Oops.... Slight problem in that last patch... I fixed it in the tree,
>and the corrected patch is attached.  Let me know how it works.
>
> cxusb.c       |   16 +++++++++++-----
> dvb-usb-ids.h |   10 ++++++----
> 2 files changed, 17 insertions(+), 9 deletions(-)
>
>
>





More information about the linux-dvb mailing list