[linux-dvb] FusionHDTV DVB-T Dual Digital2

Mark mark at bastardcard.net
Fri Sep 29 11:24:36 CEST 2006


Incidentally, I checked the inf file from the windows driver that came on the 
CD - it definatly has the USB id in it for the card. Is there any way I can 
extract the firmware? Maybe they've updated it for this particular card.

Mark

On Friday 29 September 2006 08:24, Mark McKenzie wrote:
> I tried the new version of the driver last night with some success
>
> The driver loads with the following messages in dmesg:
>
> Sep 29 08:13:04 kulfi kernel: [   16.216298] dvb-usb: found a 'DViCO
> FusionHDTV DVB-T Dual Digital 2' in cold state, will try to load a firmware
> Sep 29 08:13:04 kulfi kernel: [   16.305374] dvb-usb: downloading firmware
> from file 'dvb-usb-bluebird-01.fw'
> Sep 29 08:13:04 kulfi kernel: [   16.367611] dvb-usb: found a 'DViCO
> FusionHDTV DVB-T Dual Digital 2' in cold state, will try to load a firmware
> Sep 29 08:13:04 kulfi kernel: [   16.369592] dvb-usb: downloading firmware
> from file 'dvb-usb-bluebird-01.fw'
> Sep 29 08:13:04 kulfi kernel: [   16.431272] usbcore: registered new driver
> dvb_usb_cxusb
> Sep 29 08:13:04 kulfi kernel: [   16.564442] usb 7-1: USB disconnect,
> address 2
> Sep 29 08:13:04 kulfi kernel: [   16.564545] dvb-usb: generic DVB-USB
> module successfully deinitialized and disconnected.
> Sep 29 08:13:04 kulfi kernel: [   16.669246] usb 7-2: USB disconnect,
> address 3
> Sep 29 08:13:04 kulfi kernel: [   16.669343] dvb-usb: generic DVB-USB
> module successfully deinitialized and disconnected.
> Sep 29 08:13:04 kulfi kernel: [   18.267412] usb 7-1: new high speed USB
> device using ehci_hcd and address 4
> Sep 29 08:13:04 kulfi kernel: [   18.384471] usb 7-1: configuration #1
> chosen from 1 choice
> Sep 29 08:13:04 kulfi kernel: [   18.384779] dvb-usb: found a 'DViCO
> FusionHDTV DVB-T Dual Digital 2' in warm state.
> Sep 29 08:13:04 kulfi kernel: [   18.384900] dvb-usb: will pass the
> complete MPEG2 transport stream to the software demuxer.
> Sep 29 08:13:04 kulfi kernel: [   18.395525] DVB: registering new adapter
> (DViCO FusionHDTV DVB-T Dual Digital 2).
> Sep 29 08:13:04 kulfi kernel: [   18.731996] DVB: registering frontend 0
> (Zarlink ZL10353 DVB-T)...
> Sep 29 08:13:04 kulfi kernel: [   18.732535] input: IR-receiver inside an
> USB DVB receiver as /class/input/input3
> Sep 29 08:13:04 kulfi kernel: [   18.732624] dvb-usb: schedule remote query
> interval to 150 msecs.
> Sep 29 08:13:04 kulfi kernel: [   18.732680] dvb-usb: DViCO FusionHDTV
> DVB-T Dual Digital 2 successfully initialized and connected.
>
> Then I ran scan with the example file for my city:
>
> root at kulfi:/var/log# scan
> /usr/share/doc/dvb-utils/examples/scan/dvb-t/au-canberra
> scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/au-canberra
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> initial transponder 205625000 1 3 3 3 1 1 0
> initial transponder 177500000 1 2 0 3 1 2 0
> initial transponder 191625000 1 3 0 3 1 1 0
> initial transponder 219500000 1 3 1 3 1 1 0
> initial transponder 543500000 1 2 0 3 1 2 0
>
> >>> tune to:
>
> 205625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSIO
>N_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE WARNING: >>> tuning failed!!!
>
> >>> tune to:
>
> 205625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSIO
>N_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
> WARNING: >>> tuning failed!!!
>
> >>> tune to:
>
> 177500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSI
>ON_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 0x0807 0x0807: pmt_pid 0x0160
> Southern Cross Television -- SC10 Canberra (running)
> 0x0807 0x0827: pmt_pid 0x06ae Southern Cross Television -- SC10 HD
> (running) Network Name 'Southern Cross Television     '
>
> >>> tune to:
>
> 191625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_NONE:QAM_64:TRANSMISSI
>ON_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE WARNING: >>> tuning failed!!!
>
> >>> tune to:
>
> 191625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_NONE:QAM_64:TRANSMISSI
>ON_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
> WARNING: >>> tuning failed!!!
>
> >>> tune to:
>
> 219500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSIO
>N_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE Network Name 'WIN Digital'
> 0x327a 0x0001: pmt_pid 0x0020 WIN Digital -- WIN TV Canberra (running)
> 0x327a 0x000a: pmt_pid 0x00b0 WIN Digital -- WIN TV HD (running)
>
> >>> tune to:
>
> 543500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSI
>ON_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 0x0350 0x0350: pmt_pid 0x0400
> SBS -- SBS HD (running)
> 0x0350 0x0351: pmt_pid 0x0401 SBS -- SBS DIGITAL 1 (running)
> 0x0350 0x0352: pmt_pid 0x0402 SBS -- SBS DIGITAL 2 (running)
> 0x0350 0x0353: pmt_pid 0x0408 SBS -- SBS EPG (running)
> 0x0350 0x035e: pmt_pid 0x0403 SBS -- SBS RADIO 1 (running)
> 0x0350 0x035f: pmt_pid 0x0404 SBS -- SBS RADIO 2 (running)
> Network Name 'SBS NETWORK'
>
> >>> tune to:
>
> 571500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSIO
>N_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!!
>
> >>> tune to:
>
> 571500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSIO
>N_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
>
> and at that point the machine had locked up hard.
>
> I also noticed that on some occasions it would lock up on the first channel
> it found as well.
>
> Mark
>
> Michael Krufky <mkrufky at linuxtv.org> wrote:
> >Michael Krufky wrote:
> >> Michael Krufky wrote:
> >>> I have written to my contact at DViCO with some questions about this
> >>> device.  While we're waiting for his response, please try the
> >
> >suggestion
> >
> >>> above.  Please keep in mind that you will need to have the bluebird
> >>> firmware present in order for this test to work.
> >>
> >> I've received confirmation from DViCO that the usb components on the
> >> DViCO FusionHDTV DVB-T Dual Digital 2 are identical to the usb component
> >> on the DViCO FusionHDTV DVB-T Dual Digital 1.
> >>
> >> The attached patch, applied against v4l-dvb master repository, adds
> >> support for your device.  Please test this and let me know how it goes.
> >>
> >> ...or you can just clone the tree located at:
> >>
> >> http://linuxtv.org/hg/~mkrufky/cxusb
> >
> >Oops.... Slight problem in that last patch... I fixed it in the tree,
> >and the corrected patch is attached.  Let me know how it works.
> >
> > cxusb.c       |   16 +++++++++++-----
> > dvb-usb-ids.h |   10 ++++++----
> > 2 files changed, 17 insertions(+), 9 deletions(-)



More information about the linux-dvb mailing list