[linux-dvb] DVB (AirStar/B2C2 FlexCop ) fails after kernel.i686 2.6.20-1.2925.fc6

Paul mylists at wilsononline.id.au
Fri Apr 6 06:59:24 CEST 2007


changing title to hopefully trigger some help, as I noticed other
threads which perhaps are related?
ie keywords of AirStar &  FlexCop which is possibly the card / driver I use.

Paul

On 6/04/2007 10:14 AM, Paul Wilson wrote:
> I have two DVB devices but one of these fails to initialise after I
> update my FC6 kernel, I'm pretty sure its the Air2PC/AirStar 2 DVB-T PCI
> card.
> I have regressed back to  kernel.i686 2.6.19-1.2911.6.5.fc6 which brings
> my devices back online.
>
> I have pasted the /var/log/dmesg output for both working and broken
> kernel below
> The most interesting message is :
> **WARNING** I2C adapter driver [B2C2 FlexCop device] forgot to specify
> physical device; fix it!
>
> Any hints on what this means and if this can be fixed? or do I need to
> make some changes in my modules.conf??
>
> Thanks
>
> FC6 Kernel 2911 (working)
>
> b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded
> successfully
> flexcop-pci: will use the HW PID filter.
> flexcop-pci: card revision 2
> ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC3] -> GSI 18 (level,
> low) -> IRQ 20
> DVB: registering new adapter (FlexCop Digital TV device).
> b2c2-flexcop: MAC address = 00:d0:d7:0a:33:62
> ieee1394: Initialized config rom entry `ip1394'
> b2c2-flexcop: i2c master_xfer failed
> cx2388x v4l2 driver version 0.0.6 loaded
> b2c2-flexcop: i2c master_xfer failed
> b2c2-flexcop: found the mt352 at i2c address: 0x0f
> DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
> b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI'
> bus controlled by a 'FlexCopIIb' complete
>
>
> FC6 Kernel 2933: (not working)
> b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded
> successfully
> Linux video capture interface: v2.00
> cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
> /8]
> CORE cx88[0]: subsystem: 1822:0025, board: digitalnow DNTV Live! DVB-T
> Pro [card=42,insmod option]
> TV tuner 63 at 0x1fe, Radio tuner -1 at 0x1fe
> cx2388x v4l2 driver version 0.0.6 loaded
> input: cx88 IR (digitalnow DNTV Live!  as /class/input/input4
> cx88[0]/2: cx2388x 8802 Driver Manager
> cx88[0]/2: found at 0000:01:08.2, rev: 5, irq: 21, latency: 32, mmio:
> 0xf6000000
> flexcop-pci: will use the HW PID filter.
> flexcop-pci: card revision 2
> DVB: registering new adapter (FlexCop Digital TV device).
> b2c2-flexcop: MAC address = 00:d0:d7:0a:33:62
> **WARNING** I2C adapter driver [B2C2 FlexCop device] forgot to specify
> physical device; fix it!
> b2c2-flexcop: i2c master_xfer failed
> b2c2-flexcop: i2c master_xfer failed
> b2c2-flexcop: found the mt352 at i2c address: 0x0f
> DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
> b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI'
> bus controlled by a 'FlexCopIIb' complete
>
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>




More information about the linux-dvb mailing list