[linux-dvb] Freecom DVB 25451-Rev.3 Why have it 2 frontends?

[Benjamin Gillam]

I have the same issues with the same card.

Benjie Gillam.

arph at gmx.net wrote:
> hello,
> 
> after plugin the freecom 25451 rev3 i can see this dmesg-output:
> 
> 
> 
> [  136.488000] usb 5-3: new high speed USB device using ehci_hcd and
> address 4
> [  136.628000] usb 5-3: configuration #1 chosen from 1 choice
> [  136.760000] dvb-usb: found a 'WideView WT-220U PenType Receiver
> (Typhoon/Freecom)' in cold state, will try to load a firmware
> [  136.772000] dvb-usb: downloading firmware from file
> 'dvb-usb-wt220u-fc03.fw'
> [  136.860000] usbcore: registered new interface driver dvb_usb_dtt200u
> [  138.260000] usb 5-3: USB disconnect, address 4
> [  138.260000] dvb-usb: generic DVB-USB module successfully
> deinitialized and disconnected.
> [  139.508000] usb 5-3: new high speed USB device using ehci_hcd and
> address 5
> [  139.640000] usb 5-3: configuration #1 chosen from 1 choice
> [  139.640000] dvb-usb: found a 'WideView WT-220U PenType Receiver
> (Typhoon/Freecom)' in warm state.
> [  139.640000] dvb-usb: will use the device's hardware PID filter (table
> count: 15).
> [  139.644000] DVB: registering new adapter (WideView WT-220U PenType
> Receiver (Typhoon/Freecom)).
> [  139.644000] DVB: registering frontend 0 (WideView USB DVB-T)...
> [  139.644000] input: IR-receiver inside an USB DVB receiver as
> /class/input/input9
> [  139.644000] dvb-usb: schedule remote query interval to 300 msecs.
> [  139.644000] dvb-usb: WideView WT-220U PenType Receiver
> (Typhoon/Freecom) successfully initialized and connected.
> [  139.644000] dvb-usb: found a 'WideView WT-220U PenType Receiver
> (Typhoon/Freecom)' in warm state.
> [  139.644000] dvb-usb: will use the device's hardware PID filter (table
> count: 15).
> [  139.644000] DVB: registering new adapter (WideView WT-220U PenType
> Receiver (Typhoon/Freecom)).
> [  139.644000] DVB: registering frontend 1 (WideView USB DVB-T)...
> [  139.644000] input: IR-receiver inside an USB DVB receiver as
> /class/input/input10
> [  139.644000] dvb-usb: schedule remote query interval to 300 msecs.
> [  139.644000] dvb-usb: WideView WT-220U PenType Receiver
> (Typhoon/Freecom) successfully initialized and connected.
> [  139.816000] usbcore: registered new interface driver hiddev
> [  139.816000] usbcore: registered new interface driver usbhid
> [  139.816000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> [  139.832000] usbcore: registered new interface driver xpad
> [  139.832000] drivers/usb/input/xpad.c: driver for Xbox controllers v0.1.6
> [  141.244000] eth1: no IPv6 routers present
> [  141.944000] dvb-usb: recv bulk message failed: -110
> 
> 
> 
> in kaffeine there are also 2 devices shown, but i think i only should
> have one of it?
> 
> Can somebody explain this to me please.
> 
> Also in kaffeine, when starting tv the first time, tv-screen freezes
> after 2 seconds and i have to switch to another channel, i think it is
> some problem with the firmware, because i also have a yakumo and
> everthing is fine.
> 
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> 
> 
>