[linux-dvb] WinTV Nova-T PCI 500 new issues

[Chris Murton]

Trent Piepho wrote:
> On Mon, 6 Aug 2007, Chris Murton wrote:
>>> You haven't said if you've checked your module utils version.  Does
>>> modprobe symbol:mt2060_attach load the mt2060 driver?
>> It certainly does...
>>
>> basil:~# lsmod | grep 'mt2060'
>> basil:~# modprobe symbol:mt2060_attach
>> basil:~# lsmod
>> Module                  Size  Used by
>> mt2060                  4932  0
> 
> So, for some reason it works when you run the command after booting, but
> not when the driver loads.
> 
> Can you try this with the latest v4l-dvb?
> 
> Load the mt2060 driver,  modprobe symbol:mt2060_attach
> Make sure the dvb-usb-dib0700 driver is unloaded!
> Load the dvb-usb-dib0700 driver
> 
> Does that still give the "Unable to find symbol mt2060_attach()" error?
> 
> If that works, then try this.
> Unload dvb_usb_dib0700
> Unload mt2060
> Make sure they are really unloaded!
> modprobe dvb-usb-dib0700
> 
> Does that work, or is the error still present?

Right, very interesting. The first way works. If i'm in the OS, unload 
the dvb_usb_dib0700 module and then load mt2060 and load dvb_usb_dib0700 
I get :-

dib0700: loaded with support for 5 different device-types
dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software 
demuxer.
DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
DVB: registering frontend 0 (DiBcom 3000MC/P)...
MT2060: successfully identified (IF1 = 1220)
dvb-usb: will pass the complete MPEG2 transport stream to the software 
demuxer.
DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
DVB: registering frontend 1 (DiBcom 3000MC/P)...
MT2060: successfully identified (IF1 = 1220)
input: IR-receiver inside an USB DVB receiver as /class/input/input5
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and 
connected.
usbcore: registered new interface driver dvb_usb_dib0700

but the second does not, I get the usual symbol issue with mt2060_attach().

Thanks
Chris