[linux-dvb] hvr4000-news

Gregoire Favre gregoire.favre at gmail.com
Thu Dec 6 12:19:52 CET 2007


Hello,

I am back under an "old" 2.6.23 just to test it : sysctl works now.

With sysctl dev.cx24116.toneburst=1 I can somehow tune to some channels, like 
./szap -p -a1 -n2
reading channels from file '/home/greg/.szap/channels.conf'
zapping to 2 'ProSieben':
sat 1, frequency = 12480 MHz V, symbolrate 27500000, vpid = 0x00ff, apid = 0x0100 sid = 0x0382
using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0'
t: 1196939665.526, c: 1, r: 0, a: ----------------------------------------------
t: 1196939665.526, c: 1, r: 0, a: ioctl(fd, FE_SET_TONE, SEC_TONE_OFF)
t: 1196939665.608, c: 1, r: 0, a: ioctl(fd, FE_SET_VOLTAGE, v) (v = SEC_VOLTAGE_13)
t: 1196939665.628, c: 1, r: 0, a: ioctl(fd, FE_DISEQC_SEND_MASTER_CMD, &cmd->cmd)
t: 1196939665.812, c: 1, r: 0, a: ioctl(fd, FE_DISEQC_SEND_BURST, b) (b = SEC_MINI_B)
t: 1196939665.832, c: 1, r: 0, a: ioctl(fd, FE_SET_TONE, t) (t = SEC_TONE_ON)
t: 1196939665.898, c: 1, r: 0, a: ioctl(fefd, FE_SET_FRONTEND, &tuneto)
couldn't find pmt-pid for sid 0382
status 1f | signal d040 | snr b666 | ber 00000000 | unc 00000000 | FE_HAS_LOCK

But with a non HVR-4000 cards it found the pmt-pid well :
./szap -p -a0 -n2
reading channels from file '/home/greg/.szap/channels.conf'
zapping to 2 'ProSieben':
sat 1, frequency = 12480 MHz V, symbolrate 27500000, vpid = 0x00ff, apid = 0x0100 sid = 0x0382
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
t: 1196939675.594, c: 0, r: 0, a: ----------------------------------------------
t: 1196939675.594, c: 0, r: 0, a: ioctl(fd, FE_SET_TONE, SEC_TONE_OFF)
t: 1196939675.608, c: 0, r: 0, a: ioctl(fd, FE_SET_VOLTAGE, v) (v = SEC_VOLTAGE_13)
t: 1196939675.631, c: 0, r: 0, a: ioctl(fd, FE_DISEQC_SEND_MASTER_CMD, &cmd->cmd)
t: 1196939675.721, c: 0, r: 0, a: ioctl(fd, FE_DISEQC_SEND_BURST, b) (b = SEC_MINI_B)
t: 1196939675.758, c: 0, r: 0, a: ioctl(fd, FE_SET_TONE, t) (t = SEC_TONE_ON)
t: 1196939675.758, c: 0, r: 0, a: ioctl(fefd, FE_SET_FRONTEND, &tuneto)
status 1f | signal b2c2 | snr e52f | ber 0000ce00 | unc 00000000 | FE_HAS_LOCK

This card is really not so easy to make it working...
-- 
Grégoire FAVRE  http://gregoire.favre.googlepages.com  http://www.gnupg.org
               http://picasaweb.google.com/Gregoire.Favre



More information about the linux-dvb mailing list