[linux-dvb] Hauppauge WinTV-HVR3000 supported?

Ulrich Eckhardt uli-dvb at uli-eckhardt.de
Sun Dec 16 17:39:47 CET 2007


Hi,

i tried to get the Hauppauge WinTV-HVR3000 to work with the latest 
Mercurial software package, but had currently no success to receive a 
program by DVB-T or DVB-S. Is there a chance to get this card working?

w_scan shows the following output:

uli:/tmp # w_scan -a 0 -fc
w_scan version 20071209
-_-_-_-_ Getting frontend capabilities-_-_-_-_
frontend Conexant CX22702 DVB-T supports
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
177500:
184500:
191500:
198500:
205500:
212500:
219500:
226500:
474000:
482000: signal ok (I999B8C999D999M999T999G999Y999)
[..]
578000: signal ok (I999B8C999D999M999T999G999Y999)
[..]
858000:
tune to: :482000:I999B8C999D999M999T999G999Y999:T:27500:
Info: filter timeout pid 0x0011
Info: filter timeout pid 0x0000
Info: filter timeout pid 0x0010
tune to: :578000:I999B8C999D999M999T999G999Y999:T:27500:
Info: filter timeout pid 0x0011
Info: filter timeout pid 0x0000
Info: filter timeout pid 0x0010
tune to: :602000:I999B8C999D999M999T999G999Y999:T:27500:
Info: filter timeout pid 0x0011
Info: filter timeout pid 0x0000
Info: filter timeout pid 0x0010
dumping lists (0 services)
Done.


The card seems to be recognized:

cx88[0]: subsystem: 0070:1402, board: Hauppauge WinTV-HVR3000 TriMode 
Analog/DVB-S/DVB-T [card=53,autodetected]
cx88[0]: TV tuner type 63, Radio tuner type -1
cx88[0]: Test OK
tveeprom 0-0050: Hauppauge model 14109, rev B3D3, serial# 2956915
tveeprom 0-0050: MAC address is 00-0D-FE-2D-1E-73
tveeprom 0-0050: tuner model is Philips FMD1216MEX (idx 133, type 4)
tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) 
ATSC/DVB D
igital (eeprom 0xf4)
tveeprom 0-0050: audio processor is CX882 (idx 33)
tveeprom 0-0050: decoder processor is CX882 (idx 25)
tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
cx88[0]: hauppauge eeprom: model=14109
input: cx88 IR (Hauppauge WinTV-HVR300 as 
/devices/pci0000:00/0000:00:08.0/0000:
01:06.0/input/input5
cx88[0]/0: found at 0000:01:06.0, rev: 5, irq: 19, latency: 64, mmio: 
0xdf000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
ACPI: PCI Interrupt 0000:01:06.1[A] -> Link [LNKA] -> GSI 19 (level, 
low) -> IRQ
  19
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:01:06.2[A] -> Link [LNKA] -> GSI 19 (level, 
low) -> IRQ
  19
cx88[0]/2: found at 0000:01:06.2, rev: 5, irq: 19, latency: 64, mmio: 
0xdd000000
ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [SGRU] -> GSI 20 (level, 
low) -> IRQ
  20
PCI: Setting latency timer of device 0000:00:12.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  100.14.19  Wed Sep 12 
14:08:38 P
DT 2007
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 0070:1402, board: Hauppauge WinTV-HVR3000 TriMode 
Analog/D
VB-S/DVB-T [card=53]
cx88[0]/2: cx2388x based DVB/ATSC card
DVB: registering new adapter (cx88[0])
DVB: registering frontend 0 (Conexant CX22702 DVB-T)...

Current Kernel:
uli:/tmp # cat /proc/version
Linux version 2.6.24-rc5-default (root at uli) (gcc version 4.2.1 (SUSE 
Linux)) #1 SMP Fri Dec 14 20:18:09 CET 2007

Uli
-- 
Ulrich Eckhardt                  http://www.uli-eckhardt.de

Ein Blitzableiter auf dem Kirchturm ist das denkbar stärkste
Misstrauensvotum gegen den lieben Gott. (Karl Krauss)



More information about the linux-dvb mailing list