[linux-dvb] Kworld DVB-T 220RF digital not working

David Dubrović david.dubrovic at globalnet.hr
Tue Feb 6 18:34:50 CET 2007


Hartmut Hackmann wrote:
> Hi,
> 
> David Dubrović schrieb:
>> I can't get the card to lock to a signal. tzap shows signal ok, and ffff
>> as snr but no lock. I've tried with newest v4l-dvb got by hg today. It's
>> not hardware/signal problem because it works in windows. Searching
>> around the web, I found that the card works for some people, so I
>> suppose I can get mine to work too.
>> Attached are the logs.
>> Thanks
>>
> This can occur if parameters in your channels.conf are wrong,
> like the Guard interval. Some of the files floating around have
> such mistakes since there a channel decoders that ignore most
> parameters. Another point is that in some countries, the transmitters
> are 167kHz off the nominal frequency.
> 
> Good luck
>   Hartmut
> 
> 
Thanks, fixed. Modulation was wrong. The interesting part is that I made 
  channels.conf file myself baed on the parameters got from the company 
that runs the transmitter.




More information about the linux-dvb mailing list