[linux-dvb] Hauppauge WinTV Nova-T Stick frontend problems

Simon Keimer skeimer at gmx.net
Tue Feb 6 20:13:47 CET 2007


hi,

I'm running 2.6.20 now and I use the firmware dvb-usb-dib0700-02-rc1.fw

usb 1-4: new high speed USB device using ehci_hcd and address 4
usb 1-4: configuration #1 chosen from 1 choice
dib0700: loaded with support for 2 different device-types
dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a 
firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-01.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
**WARNING** I2C adapter driver [Hauppauge Nova-T Stick] forgot to specify 
physical device; fix it!
dvb-usb: will pass the complete MPEG2 transport stream to the software 
demuxer.
DVB: registering new adapter (Hauppauge Nova-T Stick).
**WARNING** I2C adapter driver [DiBX000 tuner I2C bus] forgot to specify 
physical device; fix it!
DVB: registering frontend 0 (DiBcom 7000PC)...
MT2060: successfully identified (IF1 = 1220)
dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dib0700

Does anyone have an idea about this?

Greetings, Simon
> hi again,
>
> now I use linux 2.6.20-rc7-git3 and (nearly) nothing has changed.
> When I plug in the stick, dmesg tells me the following:
>
> dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a
> firmware
> dvb-usb: downloading firmware from file 'dvb-usb-dib0700-01.fw'
> dib0700: firmware started successfully.
> dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
> **WARNING** I2C adapter driver [Hauppauge Nova-T Stick] forgot to specify
> physical device; fix it!
> dvb-usb: will pass the complete MPEG2 transport stream to the software
> demuxer.
> DVB: registering new adapter (Hauppauge Nova-T Stick).
> dvb-usb: no frontend was attached by 'Hauppauge Nova-T Stick'
> dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
>
> As you can see there is a warning about I2C and again no frintend has been
> registered by the stick's driver.
>
> The USB ID of the stick is 7060, which is now recognized by the kernel.
>
> Did anynone solve this?
>
>
> Best Regards, Simon
>
> > hi Darren,
> >
> > thank you for your reply.
> >
> > > My Nova-T stick (ID 2040:7050) requires mt2060, support for which is in
> > > the v4l-dvb repository and 2.6.20-rc*; it looks like yours is also
> > > supported.
> > >
> > > If you choose to use the repository, make sure that /lib/modules/`uname
> > > -r`/kernel/drivers/media is moved out of the way and that no v4l or dvb
> > > modules are loaded.
> >
> > mt2060 is already in 2.6.19 as you may see here :
> >
> > Module                  Size  Used by
> > mt2060                  3204  0
> > dvb_usb_dib0700         6920  0
> > dvb_usb                11724  1 dvb_usb_dib0700
> > dvb_core               56424  1 dvb_usb
> > dvb_pll                 8004  1 dvb_usb
> > dib3000mc               8452  1 dvb_usb_dib0700
> > dibx000_common          1668  1 dib3000mc
> >
> > I have to load it manually but no change after that...
> >
> > I'll give the 2.6.20* a try.

-- 
Simon Keimer



More information about the linux-dvb mailing list