[linux-dvb] DiB0700 firmware update (all DiBx700-devices, Nova-T 500, Nova-T Stick and others)

lynx.abraxas at freenet.de lynx.abraxas at freenet.de
Thu Feb 8 10:19:47 CET 2007


Hallo!


I tested the firmware and everything still woks. Sadly I still don't get any SNR Values different from 0. Any idea what might be wrong? It seems it has the capability:


dvbsnoop -s signal -pd 9 -n 9 -timeout 1000
dvbsnoop V1.4.00 -- http://dvbsnoop.sourceforge.net/
   DEMUX : /dev/dvb/adapter0/demux0
   DVR   : /dev/dvb/adapter0/dvr0
   FRONTEND: /dev/dvb/adapter0/frontend0

---------------------------------------------------------
Transponder/Frequency signal strength statistics...
max cycle count: 9
Capabilities: BER: 1  SNR: 1  SIG: 1  STAT: 1  UBLK: 1
---------------------------------------------------------
cycle: 1  d_time: 0.001 s  Sig: 30675  SNR: 0  BER: 0  UBLK: 0  Stat: 0x1f [SIG CARR VIT SYNC LOCK ]
cycle: 2  d_time: 1.005 s  Sig: 30715  SNR: 0  BER: 0  UBLK: 0  Stat: 0x1f [SIG CARR VIT SYNC LOCK ]
cycle: 3  d_time: 1.008 s  Sig: 30749  SNR: 0  BER: 0  UBLK: 0  Stat: 0x1f [SIG CARR VIT SYNC LOCK ]
cycle: 4  d_time: 1.009 s  Sig: 30733  SNR: 0  BER: 0  UBLK: 0  Stat: 0x1f [SIG CARR VIT SYNC LOCK ]
cycle: 5  d_time: 1.008 s  Sig: 30670  SNR: 0  BER: 0  UBLK: 0  Stat: 0x1f [SIG CARR VIT SYNC LOCK ]
cycle: 6  d_time: 1.008 s  Sig: 30643  SNR: 0  BER: 0  UBLK: 0  Stat: 0x1f [SIG CARR VIT SYNC LOCK ]
cycle: 7  d_time: 1.008 s  Sig: 30637  SNR: 0  BER: 0  UBLK: 0  Stat: 0x1f [SIG CARR VIT SYNC LOCK ]
cycle: 8  d_time: 1.008 s  Sig: 30630  SNR: 0  BER: 0  UBLK: 0  Stat: 0x1f [SIG CARR VIT SYNC LOCK ]
cycle: 9  d_time: 1.008 s  Sig: 30640  SNR: 0  BER: 0  UBLK: 0  Stat: 0x1f [SIG CARR VIT SYNC LOCK ]






usb-storage: device scan complete
dib0700: loaded with support for 2 different device-types
dvb-usb: found a 'Uniwill STK7700P based (Hama and others)' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-02-rc1.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Uniwill STK7700P based (Hama and others)' in warm state.
**WARNING** I2C adapter driver [Uniwill STK7700P based (Hama and others)] forgot to specify physical device; fix it!
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Uniwill STK7700P based (Hama and others)).
**WARNING** I2C adapter driver [DiBX000 tuner I2C bus] forgot to specify physical device; fix it!
DVB: registering frontend 0 (DiBcom 7000MA/MB/PA/PB/MC)...
MT2060: successfully identified (IF1 = 1220)
dvb-usb: Uniwill STK7700P based (Hama and others) successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dib0700

Regards
Lynx



More information about the linux-dvb mailing list