[linux-dvb] Hp ExpressCard EC300 DVB-T tv tunner

Tortosa paco at cumas.net
Sun Feb 11 23:41:24 CET 2007


Hi all!

I have the card mentioned in the subject and i'm trying to use it in Kubuntu 
Edgy, but i can't.

dmesg gives this result:

[17207925.192000] usb 1-8: new high speed USB device using ehci_hcd and 
address 6
[17207925.332000] usb 1-8: configuration #1 chosen from 1 choice
[17207925.332000] dvb-usb: found a 'DiBcom USB2.0 DVB-T reference design 
(MOD3000P)' in warm state.
[17207925.332000] dvb-usb: will pass the complete MPEG2 transport stream to 
the software demuxer.
[17207925.336000] DVB: registering new adapter (DiBcom USB2.0 DVB-T reference 
design (MOD3000P)).
[17207925.340000] dib3000: Found a DiBcom 3000P.
[17207925.340000] DVB: registering frontend 0 (DiBcom 3000P/M-C DVB-T)...
[17207925.340000] input: IR-receiver inside an USB DVB receiver 
as /class/input/input5
[17207925.340000] dvb-usb: schedule remote query interval to 150 msecs.
[17207925.340000] dvb-usb: DiBcom USB2.0 DVB-T reference design (MOD3000P) 
successfully initialized and connected.
[17207925.340000] input: Yuan Digital TV as /class/input/input6
[17207925.340000] input: USB HID v1.11 Device [Yuan Digital TV] on 
usb-0000:00:1d.7-8

it seem's to be working properly. Then i try to get a channels.conf file with

dvb-utils/examples/scan# scan dvb-t/es-Madrid|tee channels.conf

and i get:

using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 770000000 0 2 1 3 1 3 0
initial transponder 810000000 0 2 1 3 1 3 0
initial transponder 834000000 0 2 1 3 1 3 0
initial transponder 842000000 0 2 1 3 1 3 0
initial transponder 850000000 0 2 1 3 1 3 0
initial transponder 858000000 0 2 1 3 1 3 0
>>> tune to: 
770000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!

and a lot of lines with >>>tuning failed!!!

and i don't know what to do. May someone help me?

Thanks



More information about the linux-dvb mailing list