[linux-dvb] Kenerl 2.6.20, mantis and vp-1034

Michel Verbraak michel at verbraak.org
Sun Feb 25 19:35:38 CET 2007


Michel Verbraak schreef:
> Manu Abraham schreef:
>> On 2/23/07, Michel Verbraak <michel at verbraak.org> wrote:
>>>
>>>  Just bought a new cpu and motherboard and made a clean install of 
>>> FC6 and
>>> made a vanilla 2.6.20 kernel.
>>>
>>>  tried to merge the kromtek.com/dvb/mantis.tar.bz2 driver into the 
>>> 2.6.20
>>> kernel.
>>>
>>
>> Sorry for the delayed mail, somehow it skipped my eye.
>> Did quite a bit of work and ported the mantis tree ..
>> http://kromtek.com/dvb/mantis-v4l-dvb.tar.bz2
>>
>> that warning, what you saw is fine, it came in after the i2c changes
>> in .20. It is fixed in the tree that i have put at the URL above.
>> diseqc stuff shouldn't be a problem though.
>>
>> Would be interesting to know how it goes at your side.
>>
>>
>> regards,
>> manu
> Manu,
>
> I will test this version tonight and report back.
> My rotor is working fine I discovered a small bug in my own software. 
> When this was fixed I could rotate the dish without problems.
>
> Regards,
>
> Michel.
>
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Manu,

The 24th of february 2007 version works allright for me. Following in 
messagelog:

ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKB] -> GSI 19 (level, 
low) -> IRQ 19
irq: 19, latency: 32
 memory: 0xf68ff000, mmio: 0xffffc2000002e000
found a VP-1034 PCI DVB-S/DSS device on (02:05.0),
    Mantis Rev 1 [1822:0014], irq: 19, latency: 32
    memory: 0xf68ff000, mmio: 0xffffc2000002e000
    MAC Address=[00:08:ca:19:9f:0b]
mantis_alloc_buffers (0): DMA=0xde50000 cpu=0xffff81000de50000 size=65536
mantis_alloc_buffers (0): RISC=0x30a04000 cpu=0xffff810030a04000 size=1000
DVB: registering new adapter (Mantis dvb adapter).
mantis_frontend_init (0): Probing for MB86A16 (DVB-S/DSS)
mantis_frontend_init (0): found MB86A16 DVB-S/DSS frontend @0x08
DVB: registering frontend 0 (Fujitsu MB86A16 DVB-S)...

Rotor is working allright so DiseqC is transfered normal.
I merged only the mantis part into my kernel sources. This is a x86_64 
kernel.

What should be the differences to the previous version?

I did not yet try a scan for the missing channels to see if they are 
visible right now because my dish needs reallignement, reception is 
poort, after a storm a few weeks ago and currently it is pooring rain 
here so I was not able to get on my roof.

Regards,

Michel.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20070225/f5984d00/attachment.htm


More information about the linux-dvb mailing list