[linux-dvb] New usb card from Asus "My Cinema-U3000 Mini"
David Palomares
david at mainsip.com
Tue Jan 2 12:43:24 CET 2007
Hi all,
I've tried the patch, and now the usb card gets recognized:
dib0700: loaded with support for 2 different device-types
dvb-usb: found a 'Asus My Cinema-U3000 Mini' in cold state, will try to
load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-01.fw'
dib0700: firmware started successfully.
...
dvb-usb: found a 'Asus My Cinema-U3000 Mini' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software
demuxer.
DVB: registering new adapter (Asus My Cinema-U3000 Mini).
DVB: registering frontend 0 (DiBcom 7000PC)...
dvb-usb: Asus My Cinema-U3000 Mini successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dib0700
But when i try to scan channels, it founds nothing, the output of 'scan
/usr/share/doc/dvb-utils/examples/scan/dvb-t/es-Madrid' gives me:
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/es-Madrid
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 770000000 0 2 1 3 1 3 0
initial transponder 810000000 0 2 1 3 1 3 0
initial transponder 834000000 0 2 1 3 1 3 0
initial transponder 842000000 0 2 1 3 1 3 0
initial transponder 850000000 0 2 1 3 1 3 0
initial transponder 858000000 0 2 1 3 1 3 0
>>> tune to:
770000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
770000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
810000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
810000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
834000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
834000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
842000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
842000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
850000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
850000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
858000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
858000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
I've found a channels.conf for Madrid (my city) on
/usr/share/doc/dvb-utils/examples, and copied it to /root/.tzap, but
when i try the command 'tzap TELECINCO' (for example) it outputs:
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
tuning to 770000000 Hz
video pid 0x0191, audio pid 0x0193
status 10 | signal ff77 | snr 0000 | ber 02000200 | unc 0000b593 |
FE_HAS_LOCK
status 10 | signal ff77 | snr 0000 | ber 02000200 | unc 0000b593 |
FE_HAS_LOCK
status 10 | signal ff77 | snr 0000 | ber 02000200 | unc 0000b593 |
FE_HAS_LOCK
status 10 | signal ff77 | snr 0000 | ber 02000200 | unc 0000b593 |
FE_HAS_LOCK
status 10 | signal ff77 | snr 0000 | ber 02000200 | unc 0000b593 |
FE_HAS_LOCK
I have dvb-t signal where i have the pc; and also the card comes with a
pluggable antenna i've tried with the same results.
Any ideas?
Thanks again,
David
------------------------------------------------------------------------
Logo mainsip <http://www.mainsip.com>
C/ Isabel de Farnesio Nº 20 - Local 4 || C.P. 28660 - Boadilla del Monte
(Madrid)
Teléfono 91 632 69 50 - Fax 91 632 69 18
www.mainsip.com <http://www.mainsip.com> - info at mainsip.com
<mailto:info at mainsip.com>
david at mainsip.com escribió:
> Thanks!
>
> I'll try it on thursday, i have no access to the debian machine now, and
> mail you the results.
>
> David
>
> Con fecha 30/12/2006, "Patrick Boettcher" <patrick.boettcher at desy.de>
> escribió:
>
>
>> Hi,
>>
>> The only thing you are missing is to put the USB IDs into
>> dib0710_device.c .
>>
>> The attached patch tries to do that... Can you please check it and report
>> whether it works or not?
>>
>> Patrick.
>>
>>
>> On Fri, 29 Dec 2006, David Palomares wrote:
>>
>>
>>> Hello
>>>
>>> I've got a USB DVB-T from Asus, and am trying to get it working on
>>> Debian. It has a STK7700 inside (from lsusb -v, attached) so i've
>>> updated the vendor id's and device id's to add this card. So far, it
>>> gets recognized, but i have no /dev/dvb dir, the firmware is on
>>> /lib/firmware and /usr/lib/hotplug/firmware (dvb-usb-dibusb-6.0.0.8.fw)
>>> but dmesg gives me no message about firmware being loaded or not. What
>>> else can i try?
>>>
>>> Thanks,
>>>
>>> David
>>>
>>>
>>> Here is the relevant lsusb -v output
>>>
>>>
>>> Bus 001 Device 003: ID 0b05:171f ASUSTek Computer, Inc.
>>> Device Descriptor:
>>> bLength 18
>>> bDescriptorType 1
>>> bcdUSB 2.00
>>> bDeviceClass 0 (Defined at Interface level)
>>> bDeviceSubClass 0
>>> bDeviceProtocol 0
>>> bMaxPacketSize0 64
>>> idVendor 0x0b05 ASUSTek Computer, Inc.
>>> idProduct 0x171f
>>> bcdDevice 1.00
>>> iManufacturer 1 DIBCOM
>>> iProduct 2 STK7700
>>> iSerial 3 6A17101116
>>> bNumConfigurations 1
>>> Configuration Descriptor:
>>> bLength 9
>>> bDescriptorType 2
>>> wTotalLength 46
>>> bNumInterfaces 1
>>> bConfigurationValue 1
>>> iConfiguration 0
>>> bmAttributes 0xa0
>>> (Bus Powered)
>>> Remote Wakeup
>>> MaxPower 500mA
>>> Interface Descriptor:
>>> bLength 9
>>> bDescriptorType 4
>>> bInterfaceNumber 0
>>> bAlternateSetting 0
>>> bNumEndpoints 4
>>> bInterfaceClass 255 Vendor Specific Class
>>> bInterfaceSubClass 0
>>> bInterfaceProtocol 0
>>> iInterface 0
>>> Endpoint Descriptor:
>>> bLength 7
>>> bDescriptorType 5
>>> bEndpointAddress 0x01 EP 1 OUT
>>> bmAttributes 2
>>> Transfer Type Bulk
>>> Synch Type None
>>> Usage Type Data
>>> wMaxPacketSize 0x0040 1x 64 bytes
>>> bInterval 0
>>> Endpoint Descriptor:
>>> bLength 7
>>> bDescriptorType 5
>>> bEndpointAddress 0x81 EP 1 IN
>>> bmAttributes 2
>>> Transfer Type Bulk
>>> Synch Type None
>>> Usage Type Data
>>> wMaxPacketSize 0x0040 1x 64 bytes
>>> bInterval 0
>>> Endpoint Descriptor:
>>> bLength 7
>>> bDescriptorType 5
>>> bEndpointAddress 0x82 EP 2 IN
>>> bmAttributes 2
>>> Transfer Type Bulk
>>> Synch Type None
>>> Usage Type Data
>>> wMaxPacketSize 0x0040 1x 64 bytes
>>> bInterval 0
>>> Endpoint Descriptor:
>>> bLength 7
>>> bDescriptorType 5
>>> bEndpointAddress 0x83 EP 3 IN
>>> bmAttributes 2
>>> Transfer Type Bulk
>>> Synch Type None
>>> Usage Type Data
>>> wMaxPacketSize 0x0040 1x 64 bytes
>>> bInterval 0
>>> Device Qualifier (for other device speed):
>>> bLength 10
>>> bDescriptorType 6
>>> bcdUSB 2.00
>>> bDeviceClass 0 (Defined at Interface level)
>>> bDeviceSubClass 0
>>> bDeviceProtocol 0
>>> bMaxPacketSize0 64
>>> bNumConfigurations 1
>>> Device Status: 0x0000
>>> (Bus Powered)
>>>
>>>
>>>
>>> And now the dmesg
>>>
>>> usb 1-1: new full speed USB device using uhci_hcd and address 2
>>> usb 1-1: configuration #1 chosen from 1 choice
>>> ...
>>> dib0700: loaded with support for 2 different device-types
>>> usbcore: registered new interface driver dvb_usb_dib0700
>>> ...
>>>
>>> And last the lsmod output
>>>
>>> Module Size Used by
>>> ipv6 218976 14
>>> ppdev 9348 0
>>> lp 11076 0
>>> button 6800 0
>>> ac 5380 0
>>> battery 10244 0
>>> loop 15496 0
>>> snd_seq_dummy 3972 0
>>> snd_seq_oss 29184 0
>>> snd_seq_midi 8480 0
>>> snd_seq_midi_event 7040 2 snd_seq_oss,snd_seq_midi
>>> snd_seq 44240 6
>>> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
>>> snd_via82xx 26648 0
>>> gameport 14344 1 snd_via82xx
>>> snd_ac97_codec 89120 1 snd_via82xx
>>> snd_ac97_bus 2432 1 snd_ac97_codec
>>> snd_pcm_oss 39200 0
>>> snd_mixer_oss 15744 1 snd_pcm_oss
>>> snd_pcm 70024 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss
>>> snd_timer 20100 2 snd_seq,snd_pcm
>>> snd_page_alloc 9864 2 snd_via82xx,snd_pcm
>>> snd_mpu401_uart 7808 1 snd_via82xx
>>> evdev 9472 0
>>> snd_rawmidi 22432 2 snd_seq_midi,snd_mpu401_uart
>>> snd_seq_device 7948 5
>>> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi
>>> dvb_usb_dib0700 13704 0
>>> dib7000m 14084 1 dvb_usb_dib0700
>>> dib7000p 12676 1 dvb_usb_dib0700
>>> dvb_usb 22924 1 dvb_usb_dib0700
>>> rtc 11828 0
>>> dvb_core 73128 1 dvb_usb
>>> snd 47972 11
>>> snd_seq_oss,snd_seq,snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
>>> firmware_class 9856 1 dvb_usb
>>> dvb_pll 14212 1 dvb_usb
>>> soundcore 7520 1 snd
>>> dib3000mc 11908 1 dvb_usb_dib0700
>>> dibx000_common 3972 3 dib7000m,dib7000p,dib3000mc
>>> pcspkr 2944 0
>>> vt8231 15244 0
>>> parport_pc 32548 1
>>> parport 35144 3 ppdev,lp,parport_pc
>>> i2c_isa 5504 1 vt8231
>>> i2c_viapro 8468 0
>>> via_agp 9856 1
>>> agpgart 30000 1 via_agp
>>> ide_generic 1536 0 [permanent]
>>> ide_cd 36384 0
>>> cdrom 33568 1 ide_cd
>>> ide_disk 15488 3
>>> via_rhine 22664 0
>>> mii 5504 1 via_rhine
>>> uhci_hcd 21000 0
>>> usbcore 119556 4 dvb_usb_dib0700,dvb_usb,uhci_hcd
>>> via82cxxx 8708 0 [permanent]
>>> generic 5508 0 [permanent]
>>> ide_core 111368 5
>>> ide_generic,ide_cd,ide_disk,via82cxxx,generic
>>> thermal 14088 0
>>> processor 23596 1 thermal
>>> fan 4868 0
>>>
>>>
>>> --
>>> ------------------------------------------------------------------------
>>> Logo mainsip <http://www.mainsip.com>
>>> C/ Isabel de Farnesio Nº 20 - Local 4 || C.P. 28660 - Boadilla del Monte
>>> (Madrid)
>>> Teléfono 91 632 69 50 - Fax 91 632 69 18
>>> www.mainsip.com <http://www.mainsip.com> - info at mainsip.com
>>> <mailto:info at mainsip.com>
>>>
>>>
>>>
>>>
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: david.vcf
Type: text/x-vcard
Size: 387 bytes
Desc: not available
Url : http://www.linuxtv.org/pipermail/linux-dvb/attachments/20070102/ec5c8c54/david-0001.vcf
More information about the linux-dvb
mailing list