[linux-dvb] Problem with Kworld ATSC-110

John jharitos at yahoo.com
Mon Jan 8 00:01:32 CET 2007


Thanks, I look forward to seeing if it works on your
system. I also tried it on a the latest livedvd
Knoppix distro and it diplayed the same behavior.

--- Dwaine Garden <dwainegarden at rogers.com> wrote:

> I'll do some testing too.  I have not tried both
> analog and digital on separate RF connections.
> 
> I think this is the only hdtv card that does have
> two RF connections.
> 
> ----- Original Message ----
> From: John <jharitos at yahoo.com>
> To: linux-dvb at linuxtv.org
> Sent: Saturday, January 6, 2007 10:29:11 PM
> Subject: Fw: [linux-dvb] Problem with Kworld
> ATSC-110
> 
> hermann pitton wrote:
> > it was just a typo adding the card to this case
> statement instead to 
> the
> > above one for the i2c remotes in
> saa7134_board_init1
> saa7134-cards.c.
> >
> > It is already fixed in the followup patch and
> really
> did nothing else
> > than the print out. I pointed to it on the
> video4linux-list, but 
> forgot
> > the copy for the linux-dvb ML.
> >
> >
> >
> >
> >   
> 
> Thanks Hermann .... I guess I originally
> missed/overlooked your v4l
> reply, but checking back I do see it now!
> 
> Of interest to John, Dwaine and other users, I
> checked
> the card's entry
> on the MythTV wiki
>
(http://www.mythtv.org/wiki/index.php/Kworld_ATSC_110)
> and it has a
> recent addition that cites that support for the
> analog
> side of the card
> has recently been added to the SVN.  See:
> http://svn.mythtv.org/trac/changeset/12255
> >>>>>>>>>>>>>>>>>>
> 
> Thanks for the help. I did update my mythtv via the
> svn a few weeks ago and it does give me the option
> to
> configure the analog option for the Kworld ATSC-110.
> Unfortunately, the analog side of the card doesn't
> work. When I modprobe the saa7134-dvb, it creates
> the
> /dev/dvb/adapter0 and /dev/video0 as expected. The
> problem is that it appears to me that once I load
> saa7134-dvb it assigns both the /dev/dvb/adapter0
> and
> /dev/video0 to the top RF input of the Kworld card.
> So
> for example in myth, I create the card as a DVB and
> it
> gives me the DVB0 input and after setting the analog
> option I get the -> /dev/v4l/video0 input as
> expected.
> I have OTA antenna in top RF port and the NTSC in
> the
> bottom RF port. I assign my sources and fire up the
> back and frontends. I go to watch TV and I get OTA
> digital channels but no analog. I swap the RF inputs
> then I get NTSC channels and no OTA digital.
> 
> I've also done the same test with tvtime. Set tvtime
> to the /dev/v4l/video0 and if the cable is in the
> top
> port I get analog tv when I move it to the bottom
> port
> I get nothing. The same for digital when using azap.
> 
> Am I doing something wrong or is it a limitation
> with
> this card as the way it stands today?
> 
> Thanks again for your efforts.
> 
> 
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam
> protection around 
> http://mail.yahoo.com 
> 
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
>
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> 
> 
> 
> 
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 



More information about the linux-dvb mailing list