[linux-dvb] Hauppauge HVR4000 firmware?

Uwe Schmeling u.schmeling at online.de
Sat Jan 20 18:14:14 CET 2007


Hi all,

I'm just trying to install my new HVR 4000 using Steven Toth's 
multiproto patches on  a  2.6.18 kernel (Suse 10.2). Looks pretty good
so far, however I'm missing the required firmware file. Is there
someone, who can help me with this problem?  See the logs below:

Jan 20 17:47:38 obelix kernel: Linux video capture interface: v2.00
Jan 20 17:47:38 obelix kernel: cx2388x v4l2 driver version 0.0.6 loaded
Jan 20 17:47:38 obelix kernel: PCI: Enabling device 0000:05:08.0 (0000
-> 0002)
Jan 20 17:47:38 obelix kernel: ACPI: PCI Interrupt 0000:05:08.0[A] ->
Link [APC3] -> GSI 18 (level, low) -> IRQ 82
Jan 20 17:47:38 obelix kernel: CORE cx88[0]: subsystem: 0070:6902,
board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=53,autodetected]
Jan 20 17:47:38 obelix kernel: TV tuner 63 at 0x1fe, Radio tuner -1 at 0x1fe
Jan 20 17:47:38 obelix kernel: i2c-algo-bit.o: (0) scl=1, sda=1
Jan 20 17:47:38 obelix kernel: i2c-algo-bit.o: (1) scl=1, sda=0
Jan 20 17:47:38 obelix kernel: i2c-algo-bit.o: (2) scl=1, sda=1
Jan 20 17:47:38 obelix kernel: i2c-algo-bit.o: (3) scl=0, sda=1
Jan 20 17:47:38 obelix kernel: i2c-algo-bit.o: (4) scl=1, sda=1
Jan 20 17:47:38 obelix kernel: i2c-algo-bit.o: cx88[0] passed test.
Jan 20 17:47:38 obelix kernel: tveeprom 2-0050: Hauppauge model 69009,
rev B2A0, serial# 1387233
Jan 20 17:47:38 obelix kernel: tveeprom 2-0050: MAC address is
00-0D-FE-15-2A-E1
Jan 20 17:47:38 obelix kernel: tveeprom 2-0050: tuner model is Philips
FMD1216ME (idx 100, type 63)
Jan 20 17:47:38 obelix kernel: tveeprom 2-0050: TV standards PAL(B/G)
PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
Jan 20 17:47:38 obelix kernel: tveeprom 2-0050: audio processor is CX882
(idx 33)
Jan 20 17:47:38 obelix kernel: tveeprom 2-0050: decoder processor is
CX882 (idx 25)
Jan 20 17:47:38 obelix kernel: tveeprom 2-0050: has radio, has IR remote
Jan 20 17:47:38 obelix kernel: cx88[0]: hauppauge eeprom: model=69009
Jan 20 17:47:38 obelix kernel: input: cx88 IR (Hauppauge WinTV-HVR400 as
/class/input/input6
Jan 20 17:47:38 obelix kernel: cx88[0]/0: found at 0000:05:08.0, rev: 5,
irq: 82, latency: 32, mmio: 0xd8000000
Jan 20 17:47:38 obelix kernel: cx88[0]/0: registered device video0 [v4l2]
Jan 20 17:47:38 obelix kernel: cx88[0]/0: registered device vbi0
Jan 20 17:47:38 obelix kernel: cx88[0]/0: registered device radio0
Jan 20 17:48:08 obelix kernel: cx2388x dvb driver version 0.0.6 loaded
Jan 20 17:48:08 obelix kernel: ACPI: PCI Interrupt 0000:05:08.2[A] ->
Link [APC3] -> GSI 18 (level, low) -> IRQ 82
Jan 20 17:48:08 obelix kernel: cx88[0]/2: found at 0000:05:08.2, rev: 5,
irq: 82, latency: 32, mmio: 0xda000000
Jan 20 17:48:08 obelix kernel: cx88[0]/2: cx2388x based dvb card
Jan 20 17:48:08 obelix kernel: cx24116: cx24116_attach
Jan 20 17:48:08 obelix kernel: DVB: registering new adapter (cx88[0]).
Jan 20 17:48:08 obelix kernel: DVB: registering frontend 0 (Conexant
CX24116/CX24118)...
Jan 20 17:48:30 obelix kernel: cx24116: cx24116_initfe()
Jan 20 17:48:33 obelix kernel: cx24116: cx24116_get_algo()
Jan 20 17:48:33 obelix kernel: cx24116: cx24116_set_tone(1)
Jan 20 17:48:33 obelix kernel: cx24116: cx24116_cmd_execute()
Jan 20 17:48:33 obelix kernel: cx24116: cx24116_firmware_ondemand()
Jan 20 17:48:33 obelix kernel: cx24116_firmware_ondemand: Waiting for
firmware upload (dvb-fe-cx24116.fw)...
Jan 20 17:48:33 obelix kernel: cx24116_firmware_ondemand: Waiting for
firmware upload(2)...
Jan 20 17:48:33 obelix kernel: cx24116_firmware_ondemand: No firmware
uploaded (timeout or file not found?)
Jan 20 17:48:33 obelix kernel: cx24116_cmd_execute(): Unable initialise
the firmware
Jan 20 17:48:33 obelix firmware.sh[6588]: Cannot find  firmware file
'dvb-fe-cx24116.fw'
Jan 20 17:48:33 obelix kernel: cx24116: cx24116_set_tone(1)
Jan 20 17:48:33 obelix kernel: cx24116: cx24116_cmd_execute()



Best regards Uwe



More information about the linux-dvb mailing list