[linux-dvb] Hauppauge HVR-3000
Emilio Castellano
ecastellano at microgenesis.es
Wed Jul 11 13:26:57 CEST 2007
Hi,
I'm trying to setup the above card to work in DVB-S mode without success.
I'm using Suse 10.1, with kernel 2.6.16.21-0.8-smp (distro release) and
the latest hg downloaded drivers from linuxtv.org, also I tried steven's
branch. I cannot make work the dvb-s frontend, only CX22702 (dvb-t) is
loaded.
Many times I have to play with cx8800/cx8802 load to register the dvb-t
frontend getting errors like...
>>>>>>>>>>
Jul 11 12:56:54 pinocho kernel: cx8802_register_driver() ->registering
driver type=dvb access=shared
Jul 11 12:56:54 pinocho kernel: CORE cx88[0]: subsystem: 0070:1402,
board: Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T [card=53]
Jul 11 12:56:54 pinocho kernel: cx88[0]/2: cx2388x based dvb card
Jul 11 12:56:54 pinocho kernel: cx22702_readreg: readreg error (ret == -121)
Jul 11 12:56:54 pinocho modprobe: FATAL: Error inserting cx88_dvb
(/lib/modules/2.6.16.21-0.8-smp/kernel/drivers/media/video/cx88/cx88-dvb.ko):
No such device
Jul 11 12:56:54 pinocho kernel: cx88[0]: frontend initialization failed
Jul 11 12:56:54 pinocho kernel: cx8802_dvb_probe dvb_register failed err
= -1
Jul 11 12:56:54 pinocho kernel: cx8802_register_driver() ->probe failed
err = -1
>>>>>>>>>>>>>>>><
this is the output of lsmod |grep cx
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
cx88_dvb 13700 0
cx8800 32368 0
compat_ioctl32 5120 1 cx8800
cx88_vp3054_i2c 6528 1 cx88_dvb
mt352 9348 1 cx88_dvb
dvb_pll 13444 1 cx88_dvb
or51132 11396 1 cx88_dvb
video_buf_dvb 9348 1 cx88_dvb
nxt200x 15364 1 cx88_dvb
isl6421 5888 1 cx88_dvb
zl10353 9096 1 cx88_dvb
cx24123 14472 1 cx88_dvb
lgdt330x 11268 1 cx88_dvb
cx22702 9092 1 cx88_dvb
cx8802 18820 1 cx88_dvb
cx88xx 63396 3 cx88_dvb,cx8800,cx8802
ir_common 37380 1 cx88xx
i2c_algo_bit 12168 2 cx88_vp3054_i2c,cx88xx
tveeprom 17552 1 cx88xx
videodev 27392 2 cx8800,cx88xx
v4l2_common 19968 3 cx8800,cx88xx,videodev
btcx_risc 8072 3 cx8800,cx8802,cx88xx
video_buf 24708 5 cx88_dvb,cx8800,video_buf_dvb,cx8802,cx88xx
i2c_core 23680 14
cx88_vp3054_i2c,mt352,dvb_pll,or51132,nxt200x,isl6421,zl10353,cx24123,lgdt330x,cx22702,cx88xx,i2c_algo_bit,tveeprom,i2c_i801
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<
and the kernel messages from dmesg....
Jul 11 12:58:29 pinocho kernel: compat_ioctl32: module not supported by
Novell, setting U taint flag.
Jul 11 12:58:29 pinocho kernel: cx8800: module not supported by Novell,
setting U taint flag.
Jul 11 12:58:29 pinocho kernel: cx2388x v4l2 driver version 0.0.6 loaded
Jul 11 12:58:29 pinocho kernel: ACPI: PCI Interrupt 0000:05:04.0[A] ->
GSI 20 (level, low) -> IRQ 50
Jul 11 12:58:29 pinocho kernel: cx88[0]/0: found at 0000:05:04.0, rev:
5, irq: 50, latency: 32, mmio: 0xd0000000
Jul 11 12:58:29 pinocho kernel: cx88[0]/0: registered device video0 [v4l2]
Jul 11 12:58:29 pinocho kernel: cx88[0]/0: registered device vbi0
Jul 11 12:58:29 pinocho kernel: cx88[0]/0: registered device radio0
Jul 11 12:58:56 pinocho kernel: cx88_dvb: module not supported by
Novell, setting U taint flag.
Jul 11 12:58:56 pinocho kernel: cx2388x dvb driver version 0.0.6 loaded
Jul 11 12:58:56 pinocho kernel: cx8802_register_driver() ->registering
driver type=dvb access=shared
Jul 11 12:58:56 pinocho kernel: CORE cx88[0]: subsystem: 0070:1402,
board: Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T [card=53]
Jul 11 12:58:56 pinocho kernel: cx88[0]/2: cx2388x based dvb card
Jul 11 12:58:56 pinocho kernel: DVB: registering new adapter (cx88[0])
Jul 11 12:58:56 pinocho kernel: DVB: registering frontend 0 (Conexant
CX22702 DVB-T)...
>>>>>>>>>>>>>>>>>>>>
Could someone post his modprobe.d file with the working load/parameters
order to get the dvb-s frontend loaded?
Thanking in advance,
--
Emilio Castellano
--
Emilio Castellano Leiva
Departamento de Sistemas
Abdón Terradas, 4 - 28015 Madrid (ESPAÑA)
T.: +34 91 121 4430 | www.microgenesis.es
More information about the linux-dvb
mailing list