[linux-dvb] Technisat SkyStar2 HD DVB card support

[benco]

Hi,

another update - I did some progress. First of all I have to say that I did
not change anything:) I'm able to tune DVB-S2 channels (Pro7 HD, ANIXE HD and 
Sat1 HD) but with some limitations:

- everytime I want to re-tune to another DVB-S2 channel I have to rmmod and
insmod budget_ci module

- quality of the picture is unstable - sometimes it's perfect, sometimes
looks like encrypted

- since I'm unable to play stream directly via mplayer (mplayer
dvb://"channel") I have to run szap2 -p and consequently run mplayer on
/dev/dvb/adapter0/dvr0 device. It does not work for more then 10 seconds - 
mplayer crashes with a lot of errors. I can send the output later.

Roman


On Fri, Jun 01, 2007 at 10:15:29AM +0200, benco wrote:
> Hi,
> 
> current status - it works for me on 32-bit HW - I see the card and I'm able
> to tune DVB-S channels from Astra-19.2E, but not DVB-S2 except Astra HD Promo.
> 
> szap2 -c .szap/channels.conf -t 2 -e 2 -m 8 "Pro7HD"
> reading channels from file '.szap/channels.conf'
> zapping to 1080 'Pro7HD':
> sat 0, frequency = 12722 MHz H, symbolrate 22000000, vpid = 0x00ff, apid =
> 0x0103 sid = 0x27d8 (fec = 32, mod = 8)
> Querying info .. Delivery system=DVB-S2
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> ----------------------------------> Using 'STB0899 DVB-S2' DVB-S2
> diseqc: sat_no:0 pol_vert:0 hi_band:1 cmd:e0 10 38 f3 wait:0
> 
> do_tune: API version=2, delivery system = 2
> do_tune: Frequency = 2122000, Srate = 22000000 (DVB-S2)
> do_tune: Frequency = 2122000, Srate = 22000000 (SET_PARAMS)
> 
> 
> status 00 | signal 05aa | snr 012d | ber 00000000 | unc fffffffe | 
> status 00 | signal 05aa | snr 012d | ber 00000000 | unc fffffffe | 
> status 00 | signal 05aa | snr 012d | ber 00000000 | unc fffffffe | 
> status 00 | signal 05aa | snr 012d | ber 00000000 | unc fffffffe | 
> status 00 | signal 05aa | snr 012d | ber 00000000 | unc fffffffe | 
> status 00 | signal 05aa | snr 012d | ber 00000000 | unc fffffffe | 
> 
> I have the following record for Pro7HD in channels.conf:
> 
> Pro7HD:12722:h:0:22000:255:259:10200
> 
> Same issue with Sat1 and ANIXE HD.
> 
> Any idea?
> 
> Thanks,
> 
> Roman

-- 
----------------------------------------------------------------------
  ,''`.       [benco] | mailto: benco at acid.sk | silc: /msg benco
 : :' :  -------------------------------------------------------------
 `. `'           GPG publickey: http://www.acid.sk/pubkey.asc
   `-      KF  =  388E 43D9 7316 A4D4 A0EB  C4F2 E769 64EB DEB3 7CF1