[linux-dvb] DVB-C budget decoding - no picture

Simon Baxter linuxtv at nzbaxters.com
Wed Jun 6 20:00:20 CEST 2007


>> [root at media1 ~]# kaffeine
>> kbuildsycoca running...
>> 0
>> /dev/dvb/adapter0/frontend0 : opened ( ST STV0297 DVB-C )
>> /dev/dvb/adapter0/frontend1 : : No such file or directory
>> /dev/dvb/adapter1/frontend0 : : No such file or directory
>> QLayout "unnamed" added to QWidget "unnamed", which already has a layout
>> [root at media1 ~]# Tuning to: Scan / autocount: 0
>> DvbCam::probe(): LLCI slot found on /dev/dvb/adapter0/ca0
>> DvbCam::probe(): CA module present on /dev/dvb/adapter0/ca0
>> Using DVB device 0:0 "ST STV0297 DVB-C"
>> tuning DVB-C to 594000000
>> inv:2 sr:6956000 fecH:9 mod:3
>> . LOCKED.
>> NOUT: 1
>> dvbEvents 0:0 started
>> Tuning delay: 705 ms
>> CamThread: started
>> CamThread: just using the first cam slot
>> PmtThread: started
>> [2550] [input_vdr] vdr_class_get_instance: /usr/share/apps/kaffeine/logo
>> bad_frame
>> [2550] [input_vdr] vdr_class_get_instance: /root/.kaxtv.ts
>> pipe opened
>> PmtThread: new pmt received
>> PmtThread: stopped
>> xine pipe opened /root/.kaxtv.ts
>> CamThread: cam 0 is ready
>> CamThread: LLCI cam slot detected
>> CamThread: pmt sent to cam

> This looks correct (pmt has been found, encoded & uploaded to the cam).
Are
> you sure your cam works correctly with the used scrambling system / smart
> card?

The CAM/Smartcard work fine with the BDA drivers provided, under Windows...




More information about the linux-dvb mailing list