[linux-dvb] b2c2-flexcop: unkown FlexCop Revision: f

[Bernd Schmidt]

Hi,

I tried to install a Technisat Skystar 2 TV PCI card on opensuse 10.2 with yast and failed.
yast reported no errors, but Kaffeine did not detect a DVB device.

Info printed on card:
MODEL SKYSTAR 2
P/N: 92105-20003D
REV: 2.6D

Info printed on flexcop-chip:
FLEXCOP IIB
MMSHG-000
0607


Is this card supported by linux?

Find attached the requested infos

In addition the output from dmesg | grep flexcop

mamba:/tmp # dmesg | grep flexcop
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
flexcop-pci: will use the HW PID filter.
flexcop-pci: card revision 2
b2c2-flexcop: unkown FlexCop Revision: f. Please report the linux-dvb at linuxtv.org.
b2c2-flexcop: reading of MAC address failed.
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: no frontend driver found for this B2C2/FlexCop adapter

Thanx in advance,
  Bernd
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: lsmod.out
Url: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20070611/5245dd6e/attachment-0003.txt 
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: lspci-vn.out
Url: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20070611/5245dd6e/attachment-0004.txt 
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: lspci-v.out
Url: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20070611/5245dd6e/attachment-0005.txt