[linux-dvb] Any chance for "Medion 7134 Bridge #2 [16be:0005]" to be fully supported?

[Andreas Krause]

Hi there!

I have problems to enable the DVB part of the following DVB-S card:

card=93, "Medion 7134 Bridge #2 [16be:0005]"

It is exactly the same card as this one (even printed on PCB):
http://www.creatix.de/support/download/gruppe6/CTX929_spec.pdf

Chipset:
SD1878/SHA, SAA7134HL, TDA10086HT

#lspci -v
00:06.0 Multimedia controller: Philips Semiconductors SAA7134/SAA7135HL
Video Broadcast Decoder (rev 01)
        Subsystem: Creatix Polymedia GmbH Unknown device 0005
        Flags: bus master, medium devsel, latency 32, IRQ 5
        Memory at ea000000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [40] Power Management version 1

#lsmod | grep saa
saa7134               117696  0 
video_buf              23364  1 saa7134
compat_ioctl32          1376  1 saa7134
ir_kbd_i2c              8656  1 saa7134
i2c_core               20480  9
w83627hf,i2c_isa,eeprom,dvb_usb,dvb_pll,i2c_viapro,tuner,saa7134,ir_kbd_i2c
ir_common              34084  2 saa7134,ir_kbd_i2c
videodev               25952  1 saa7134
v4l2_common            15904  3 tuner,saa7134,videodev
v4l1_compat            12420  2 saa7134,videodev


#dmesg
saa7134[0]: found at 0000:00:06.0, rev: 1, irq: 5, latency: 32, mmio:
0xea000000
saa7134[0]: subsystem: 16be:0005, board: Medion 7134 Bridge #2
[card=93,autodetected]
saa7134[0]: board init: gpio is 0
saa7134[0]: Medion 7134 Bridge #2: dual saa713x broadcast decoders
saa7134[0]: Sorry, none of the inputs to this chip are supported yet.
saa7134[0]: Dual decoder functionality is disabled for now, use the other
chip.
saa7134[0]: i2c eeprom 00: be 16 05 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50
saa7134[0]: i2c eeprom 20: 01 40 01 02 02 03 01 00 06 ff 00 21 02 51 96 2b
saa7134[0]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c
saa7134[0]: i2c eeprom 40: ff 24 00 c0 ff 1c 00 ff ff ff fd 79 44 9f c2 8f
saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0


modprobe tda10086 has no effect.

Kernel and modules are linux-image-2.6.21-1-686_2.6.21-4_i386.deb (current
debian unstable).

Any other info needed?

Thanks for your help!

CU - nak