[linux-dvb] Vivanco 21056/LR306 a.k.a. MSI DVB at Anywhere a.k.a LifeView Hybrid doesn't scan

Werner Braun werner.braun at gmx.de
Fri Jun 15 16:16:45 CEST 2007


Peter,

>[snip]
>> thanks for your reply. Here's what DMESG says when using card=112:
>[snip]

>Hi Werner, 

>Just looking at the subject line; LR306 suggests an MSI TV at nywhere A/D.  
>Try card=94.  The Anywhere A/D appears to be distinct from the Anywhere 
>Plus, Anywhere Master and the plain Anywhere.  I don't know where 
>DVB at nywhere fits in the lineup.  

Here's what DMESG says:

saa7130/34: v4l2 driver version 0.2.14 loaded
saa7133[0]: found at 0000:02:0e.0, rev: 208, irq: 18, latency: 32, mmio: 
0xdd800000
saa7133[0]: subsystem: 4e42:3306, board: LifeView FlyDVB-T Hybrid Cardbus 
[card=94,insmod option]
saa7133[0]: board init: gpio is 210000
saa7133[0]: i2c eeprom 00: 42 4e 06 33 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: 00 00 62 08 ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 ed ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 05 01 01 16 32 15 ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner 1-004b: chip found @ 0x96 (saa7133[0])
tuner 1-004b: setting tuner address to 61
tuner 1-004b: type set to tda8290+75a
tuner 1-004b: setting tuner address to 61
tuner 1-004b: type set to tda8290+75a
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
DVB: registering new adapter (saa7133[0])
DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 0 -- invalid
tda1004x: trying to boot from eeprom
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 0 -- invalid
tda1004x: waiting for firmware upload...
tda1004x: found firmware revision 29 -- ok
tda827x_probe_version: could not read from tuner at addr: 0xc2

... and now for W_SCAN/DMESG

tda1004x: setting up plls for 48MHz sampling clock
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 80 -- invalid
tda1004x: trying to boot from eeprom
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 80 -- invalid
tda1004x: waiting for firmware upload...
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 80 -- invalid
tda1004x: firmware upload failed

... so apparently no avail. 

the 4e42:3306 subvendor id is stated for card=55, so I reckon, this might be 
the best bet.

I've browsed through the old MSI threads - is there anything known about the 
usage of frequency offsets (the 167 trick) in Germany, especially 
Berlin-Brandenburg region?

Bye
Werner



More information about the linux-dvb mailing list